Spatiotemporal Magnetocaloric Microenvironment for Guiding the Fate of Biodegradable Polymer Implants

The degradation behavior of implants is significantly important for bone repair. However, it is still unprocurable to spatiotemporally regulate the degradation of the implants to match bone ingrowth. In this paper, a magneto-controlled biodegradation model is established to explore the degradation behavior of magnetic scaffolds in a magnetothermal microenvironment generated by an alternating magnetic field (AMF). The results demonstrate that the scaffolds can be heated by magnetic nanoparticles (NPs) under AMF, which dramatically accelerated scaffold degradation. Especially, magnetic NPs modified by oleic acid with a better interface compatibility exhibit a greater heating efficiency to further facilitate the degradation. Furthermore, the molecular dynamics simulations reveal that the enhanced motion correlation between magnetic NPs and polymer matrix can accelerate the energy transfer. As a proof-of-concept, the feasibility of magneto-controlled degradation for implants is demonstrated, and an optimizing strategy for better heating efficiency of nanomaterials is provided, which may have great instructive significance for clinical medicine.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

A synthetic polymer with a laminin-apatite composite layer on its surface would be useful as a percutaneous device. The preparation of such a composite was attempted in the present study using poly（ ethylene terephthalate ） （PET） and polyethylene （PE） as the synthetic polymer. PET and PE plates and those pretreated with an oxygen plasma were alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable calcium phosphate solution supplemented with laminin （ LCP solution ）. The PET and PE plates pretreated with an oxygen plasma formed a uniform and continuous layer of a laminin-apatite composite on their surfaces. In contrast, the PET and PE plates that had not been pretreated with an oxygen plasma did not form a continuous layer of a laminin-apatite composite on their surfaces. The hydrophilic functional groups on the PET and PE surfaces introduced by the plasma treatment were responsible for the successful laminin-apatite coruposite coating.     

Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Pool boiling on a superhydrophilic surface

Titanium Dioxide, TiO₂, is a photocatalyst with a unique characteristic. A surface coated with TiO₂ exhibits an extremely high affinity for water when exposed to UV light and the contact angle decreases nearly to zero. Inversely, the contact angle increases when the surface is shielded from UV. This superhydrophilic nature gives a self-cleaning effect to the coated surface and has already been applied to some construction materials, car coatings and so on. We applied this property to the enhancement of boiling heat transfer. An experiment involving the pool boiling of pure water has been performed to make clear the effect of high wettability on heat transfer characteristics. The heat transfer surface is a vertical copper cylinder of 17 mm in diameter and the measurement has been done at saturated temperature and in a steady state. Both TiO₂-coated and non-coated surfaces were used for comparison. In the case of the TiO₂-coated surface, it is exposed to UV light for a few hours before experiment and it is found that the maximum heat flux (CHF) is about two times larger than that of the uncoated surface. The temperature at minimum heat flux (MHF) for the superhydrophilic surface is higher by 100 K than that for the normal one. The superhydrophilic surface can be an ideal heat transfer surface. Copyright © 2002 John Wiley & Sons, Ltd.     

The roles of conserved carboxylate residues in IMP dehydrogenase and identification of a transition state analog

IMP dehydrogenase (IMPDH) catalyzes the oxidation of IMP to XMP with the concomitant reduction of NAD+; the enzyme is activated by K+. This reaction is the rate-limiting step in de novo guanine nucleotide biosynthesis. In order to identify functionally important residues in IMPDH, including those involved in substrate and K+ binding, we have mutated 11 conserved Asp and Glu residues to Ala in Escherichia coli IMPDH. The values of kcat, Km, and Ki for GMP, XMP, mizoribine 5'-monophosphate (MMP), and beta-methylene-tiazofurin adenine dinucleotide (TAD) were determined. Five of these mutations caused a significant change (>/=10-fold) in one of these parameters. The Asp248 --> Ala mutation caused 100-fold decrease in the value of kcat and a 25-fold increase in the value of Kii for TAD; these observations suggest that Asp248 is in the NAD+ binding site. The Asp338 --> Ala mutation caused a 600-fold decrease in the value of kcat, but only a 5-10-fold increase in the values of Km for IMP and Kis for IMP analogs, suggesting that Asp338 may be involved in acid-base catalysis as well as IMP binding. The remaining three residues, Asp13, Asp50, and Glu469, appear to be involved in K+ activation; these residues may be ligands at one or more K+ binding sites. Interestingly, changes in the values of Ki for MMP correlate with changes in kcat/KmKm of IMPDH, while no such correlation is observed for GMP, XMP, and TAD. This observation indicates that MMP is a transition state analog for the IMPDH reaction.     

Relationship between the genomic organization and the overlapping embryonic expression patterns of the zebrafish dlx genes

To understand the relationship between the expression and the genomic organization of the zebrafish dlx genes, we have determined the genomic structure of the dlx2 and dlx4 loci. This led to the identification of the zebrafish dlx1 and dlx6 genes, which are closely linked to dlx2 and dlx4, respectively. Therefore, the inverted convergent configuration of Dlx genes is conserved among vertebrates. Analysis of the expression patterns of dlx1 and dlx6 showed striking similarities to those of dlx2 and dlx4, respectively, the genes to which they are linked. Furthermore, the expression patterns of dlx3 and dlx7, which likely constitute a third pair of convergently transcribed genes, are indistinguishable. Thus, the overlapping expression patterns of linked Dlx genes during embryonic development suggest that they share cis-acting sequences that control their spatiotemporal expression. The evolutionary conservation of the genomic organization and combinatorial expression of Dlx genes in distantly related vertebrates suggest tight control mechanisms that are essential for their function during development.     

A case of paraquat poisoning and subsequent fatality presenting to an emergency department

Paraquat (1,1'-dimethyl-4,4'-dipyridylium) is an herbicide associated with both accidental and intentional ingestion, leading to severe and often fatal toxicity. Prognosis is largely dependent on the amount of paraquat absorbed. Rapid identification of the symptoms of paraquat toxicity (burns or ulceration at the site of ingestion or injection, acute respiratory distress, and renal failure) can facilitate early treatment intervention to limit absorption. We report a case of a 71-year-old man with a suicidal ingestion of paraquat 2 days prior to presentation. Serum paraquat levels, time elapsed since ingestion, and clinical symptoms all indicated poor prognosis. The patient developed severe respiratory distress and progressive renal failure, and died 6 days after admission to the hospital.