Development of low-alcohol isotonic beer by interrupted fermentation

Alcohol-free beer with isotonic properties is getting more popular and its production can be carried out by different production strategies; however, interrupted fermentation is still a challenge. Therefore, the objective of this study was to develop a low-alcohol isotonic beer (<0.5% v/v) by interrupted fermentation. Moreover, the major objective is to compare the developed product to commercial beverages (sports drinks, ‘Pilsen' regular beer, alcohol-free beers and low-alcohol isotonic beer). The beverages were evaluated based on pH, alcohol content (% v/v), total titratable acidity (mEq L⁻¹), osmolality (mOsmol kg⁻¹), bitterness International Bitterness Units, colour European Brewery Convention, total phenolic compounds (mg L⁻¹ gallic acid), reducing and total sugars (%) and Na and K contents (mg L⁻¹). The developed low-alcohol isotonic beer presented characteristics similar to sports drinks, with the advantage of being richer in phenolic compounds and suitable osmolality. Despite salts were added in its formulation, the grades attributed to all beers employed in the sensory evaluation, as well as the purchase intention did not present significant differences.     

Ternary Blends of Renewable Fast Pyrolysis Bio-Oil,Advanced Bioethanol,and Marine Gasoil as Potential Marine Biofuel

An alternative for reducing emissions from marine fuel is to blend bio-oil from lignocellulose non-edible feedstocks to diesel fossil fuels. Phase diagrams of the ternary systems were built to represent the transition from heterogeneous regions to homogeneous regions. Four homogeneous blends of bio-oil of eucalyptus-bioethanol-marine gasoil were experimentally characterized with respect to the most important fuel parameters for marine engines: water content, flash point, low heating value, viscosity, and acidity. Blends with closer properties to marine gasoil replacement, lower costs, and environmental impacts should be tested for large engines.     

Dispersion-relation-preserving FDTD algorithms for large-scale three-dimensional problems

We introduce dispersion-relation-preserving (DRP) algorithms to minimize the numerical dispersion error in large-scale three-dimensional (3D) finite-difference time-domain (FDTD) simulations. The dispersion error is first expanded in spherical harmonics in terms of the propagation angle and the leading order terms of the series are made equal to zero. Frequency-dependent FDTD coefficients are then obtained and subsequently expanded in a polynomial (Taylor) series in the frequency variable. An inverse Fourier transformation is used to allow for the incorporation of the new coefficients into the FDTD updates. Butterworth or Chebyshev filters are subsequently employed to fine-tune the FDTD coefficients for a given narrowband or broadband range of frequencies of interest. Numerical results are used to compare the proposed 3D DRP-FDTD schemes against traditional high-order FDTD schemes.     

Finite-difference time-domain simulation of scattering from objectsin continuous random media

A three-dimensional (3D) finite-difference time-domain (FDTD) scheme is introduced to model the scattering from objects in continuous random media. FDTD techniques have been previously applied to scattering from random rough surfaces and randomly placed objects in a homogeneous background, but little has been done to simulate continuous random media with embedded objects where volumetric scattering effects are important. In this work, Monte Carlo analysis is used in conjunction with FDTD to study the scattering from perfectly electrically conducting (PEC) objects embedded in continuous random media. The random medium models under consideration are chosen to be inhomogeneous soils with a spatially fluctuating random permittivities and prescribed correlation functions. The ability of frequency averaging techniques to discriminate objects in this scenarion is also briefly investigated. The simulation scheme described in this work can be adapted and used to help in interpreting the scattered field data from targets in random environments such as geophysical media, biological media, or atmospheric turbulence     

An iterative ADI-FDTD with reduced splitting error

We present a new iterative alternating-direction-implicit finite-difference time-domain (ADI-FDTD) method. By recognizing the ADI-FDTD method as a special case of a more general iterative approach to solve the Crank-Nicolson (CN) FDTD scheme, the splitting error in ADI-FDTD can be reduced systematically. Numerical examples are used to illustrate the improved accuracy of this method.     

Photo-Fenton removal of water-soluble polymers

This paper presents the results of experiments carried out in a laboratory-scale photochemical reactor on the photodegradation of different polymers in aqueous solutions by the photo-Fenton process. Solutions of three polymers, polyethyleneglicol (PEG), polyacrylamide (PAM), and polyvinylpyrrolidone (PVP), were tested under different conditions. The reaction progress was evaluated by sampling and analyzing the total organic carbon concentration in solution (TOC) along the reaction time. The behavior of the different polymers is discussed, based on the evolution of the TOC–time curves. Under specific reaction conditions, the formation and coalescence of solid particles was visually observed. Solids formation occurred simultaneously to a sharp decrease in the TOC of the liquid phase. This may be favorable for the treatment of industrial wastewater containing polymers, since the photodegradation process can be coupled with solid separation systems, which may reduce the treatment cost.     

The roles of conserved carboxylate residues in IMP dehydrogenase and identification of a transition state analog

IMP dehydrogenase (IMPDH) catalyzes the oxidation of IMP to XMP with the concomitant reduction of NAD+; the enzyme is activated by K+. This reaction is the rate-limiting step in de novo guanine nucleotide biosynthesis. In order to identify functionally important residues in IMPDH, including those involved in substrate and K+ binding, we have mutated 11 conserved Asp and Glu residues to Ala in Escherichia coli IMPDH. The values of kcat, Km, and Ki for GMP, XMP, mizoribine 5'-monophosphate (MMP), and beta-methylene-tiazofurin adenine dinucleotide (TAD) were determined. Five of these mutations caused a significant change (>/=10-fold) in one of these parameters. The Asp248 --> Ala mutation caused 100-fold decrease in the value of kcat and a 25-fold increase in the value of Kii for TAD; these observations suggest that Asp248 is in the NAD+ binding site. The Asp338 --> Ala mutation caused a 600-fold decrease in the value of kcat, but only a 5-10-fold increase in the values of Km for IMP and Kis for IMP analogs, suggesting that Asp338 may be involved in acid-base catalysis as well as IMP binding. The remaining three residues, Asp13, Asp50, and Glu469, appear to be involved in K+ activation; these residues may be ligands at one or more K+ binding sites. Interestingly, changes in the values of Ki for MMP correlate with changes in kcat/KmKm of IMPDH, while no such correlation is observed for GMP, XMP, and TAD. This observation indicates that MMP is a transition state analog for the IMPDH reaction.     

Relationship between the genomic organization and the overlapping embryonic expression patterns of the zebrafish dlx genes

To understand the relationship between the expression and the genomic organization of the zebrafish dlx genes, we have determined the genomic structure of the dlx2 and dlx4 loci. This led to the identification of the zebrafish dlx1 and dlx6 genes, which are closely linked to dlx2 and dlx4, respectively. Therefore, the inverted convergent configuration of Dlx genes is conserved among vertebrates. Analysis of the expression patterns of dlx1 and dlx6 showed striking similarities to those of dlx2 and dlx4, respectively, the genes to which they are linked. Furthermore, the expression patterns of dlx3 and dlx7, which likely constitute a third pair of convergently transcribed genes, are indistinguishable. Thus, the overlapping expression patterns of linked Dlx genes during embryonic development suggest that they share cis-acting sequences that control their spatiotemporal expression. The evolutionary conservation of the genomic organization and combinatorial expression of Dlx genes in distantly related vertebrates suggest tight control mechanisms that are essential for their function during development.