Investigation of thermal residual stresses during laser ablation of tantalum carbide coated graphite substrates using micro-Raman spectroscopy and COMSOL multiphysics

Laser ablation of high-temperature ceramic coatings results in thermal residual stresses due to which the coatings fail by cracking and debonding. Hence, the measurement of such residual stresses during laser ablation process holds utmost importance from the view of performance of coatings in extreme conditions. The present research aims at investigating the effect of laser parameters such as laser pulse energy, scanning speed and line spacing on thermal residual stresses induced in tantalum carbide-coated graphite substrates. Residual stresses were measured using micro-Raman spectroscopy and correlated with Raman peak shifts. Transient thermal analysis was performed using COMSOL Multiphysics to model the single ablated track and residual stresses were reported at low, moderate and high pulse energy regimes. The results showed that the initial laser conditions caused higher tensile residual stresses. Moderate pulse energy regime comprised higher compressive residual stresses due to off centre overlapping of the laser pulses. Higher pulse energy (250 μJ), higher scanning speed (1000 mm/s) and moderate line spacing (20 μm) caused accumulation of tensile residual stresses during the final stage of laser ablation. The deviation of experimental residual stresses from COMSOL numerical model was attributed to unaccounted additional stresses induced during thermal spraying process and deformation potentials in the numerical model.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.     

Processing and microstructure of non-oxide ceramic fibres

Research and development efforts on high-temperature, oxidation-resistant fibres have increased over the past decade due to the demand for light-weight, stiff and strong composite materials in aerospace applications. Varieties of ‘high-performance’, continuous, non-oxide fibres with low-density, high tensile strength and tensile modulus have been developed either from organic precursors or via chemical vapour deposition for fabrication of ceramic matrix composites. Fibres derived from polymer precursors (e.g. Nicalon, Tyranno, HPZ) are small in diameter (compared to CVD monofilaments) and are ideally suited for ceramic composites. Processing, microstructural stability and mechanical properties of these newly developed SiC and Si₃N₄ base fibres are briefly reviewed in this paper.     

Surface localization of the sea urchin egg receptor for sperm

The sea urchin egg receptor for sperm is thought to be involved in species-specific sperm-egg interactions at the egg surface. Recent revisions in the deduced amino acid sequence of the cloned cDNAs indicate that the protein encoded does not possess the common structural hallmarks of a membrane protein. Thus, investigation of the localization and association of the protein with the egg surface is crucial. We describe and characterize a new monoclonal antibody raised against recombinant sperm receptor protein. This antibody, in conjunction with several polyclonal antibodies, was used to study the receptor protein in eggs. Immunoprecipitation studies indicated that the antibodies recognize the high Mr (ca. 350 K) sperm receptor protein which copurified with egg plasma membrane-vitelline layer complexes. The sperm receptor protein was solubilized only by detergents and not by treatments designed to solubilize peripherally associated or lipid-anchored membrane proteins, suggesting a tight association with the membrane fraction. Confocal immunofluorescence microscopy of live eggs indicated surface staining. Finally, lysylendoproteinase C treatment of live eggs resulted in a loss of the high Mr receptor protein epitopes, and the concomitant release of a 70-kDa proteolytic fragment, which correlated with a reduced ability of the eggs to be fertilized. Taken together, these data indicate that at least some fraction of the sperm receptor protein is present on the egg surface, a requisite locale for a sperm binding protein.     

Cytoplasmic tail deletion of T cell receptor (TCR) beta-chain results in its surface expression as glycosylphosphatidylinositol-anchored polypeptide on mature T cells in the absence of TCR-alpha

Surface expression of the T cell antigen receptor (TCR) in mature T cells requires the association of a variable heterodimer (alpha.beta or gamma.delta) with six invariant CD3 polypeptides (gamma, delta, epsilon-epsilon, zeta-zeta, or zeta-eta). We described here that deletion of the cytoplasmic tail polypeptide sequence (Lys-Lys-Lys-Asn-Ser) of TCR beta-chain (beta CT) results in expression of the truncated beta-chain on the surface of a mature T cell hybridoma line, in the absence of TCR-alpha, as a glycophosphatidylinositol (GPI)-anchored monomeric polypeptide. The GPI-anchored TCR-beta CT is not associated with CD3-epsilon and is incapable of conventional signal transduction. Association with TCR-alpha prevents beta CT from GPI-linkage formation. The alpha beta CT heterodimer binds the CD3 polypeptides, and the resultant TCR alpha beta CT/CD3 complex is capable of signal transduction. Our data show that a signal sequence for GPI-linkage formation is present in TCR-beta, and this alternative membrane anchoring mechanism can be utilized by beta-chain polypeptide lacking the CT sequence. We conclude therefore that in the absence of TCR-alpha expression, the beta-chain CT sequence plays an essential function in hindering GPI-linkage formation, thereby preventing escape of incompletely assembled TCR beta-chain to the cell surface of mature T cells.     

The stationary-phase-exit defect of cydC (surB) mutants is due to the lack of a functional terminal cytochrome oxidase

The surB gene was identified as a gene product required for Escherichia coli cells to exit stationary phase at 37 degrees C under aerobic conditions. surB was shown to be the same as cydC, whose product is required for the proper assembly and activity of cytochrome d oxidase. Cytochrome d oxidase, encoded by the cydAB operon, is one of two alternate terminal cytochrome oxidases that function during aerobic electron transport in E. coli. Mutations inactivating the cydAB operon also cause a temperature-sensitive defect in exiting stationary phase, but the phenotype is not as severe as it is for surB mutants. In this study, we examined the phenotypes of surB1 delta(cydAB) double mutants and the ability of overexpression of cytochrome o oxidase to suppress the temperature-sensitive stationary-phase-exit defect of surB1 and delta(cydAB) mutants and analyzed spontaneous suppressors of surB1. Our results indicate that the severe temperature-sensitive defect in exiting stationary phase of surB1 mutants is due both to the absence of terminal cytochrome oxidase activity and to the presence of a defective cytochrome d oxidase. Membrane vesicles prepared from wild-type, surB1, and delta(cydAB) strains produced superoxide radicals at the same rate in vitro. Therefore, the aerobic growth defects of the surB1 and delta(cydAB) strains are not due to enhanced superoxide production resulting from the block in aerobic electron transport.