Fixed mesh front‐tracking methodology for finite element simulations

A direct front‐tracking method using an Eulerian–Lagrangian formulation is developed in two space dimensions. The front‐tracking method is general in that it can track any type of interface once its local velocity is specified or has been determined by calculation. The method uses marker points to describe the interface position and tracks the interface evolution on a fixed finite‐element mesh, including growth, contraction, splitting and merging. Interfacial conditions are applied directly at the interface position. The method is applied to three scenarios that involve different interface conditions and are based on energy and mass diffusion. The three calculations are for the dendritic solidification of a pure substance, the cellular growth of an alloy, and the Ostwald ripening of silica particles in silicon. Numerical results show that very complicated interface morphologies and topological changes can be simulated properly and efficiently. Copyright © 2004 John Wiley & Sons, Ltd.     

Balloon dilatation in acute myocardial infarct in routine clinical practice: results of the register of the Working Society of Leading Cardiologic Hospital Physicians in 4,625 patients

Balloon angioplasty as the treatment of first choice in the setting of an acute myocardial infarction (AMI) is gaining widespread acceptance because of favourable results from specialised centres concerning high patency rates and low mortality. This study reports the results of angioplasty for AMI at large community hospitals during 1992-1995. 4625 procedures were performed at 68 centres of the Arbeitsgemeinschaft Leitender Kardiologischer Krankenhaus?rzte (ALKK). The age of the patients was 60.8 +/- 11.3 years, with 75.1% men. The infarct related artery was the left anterior descendent in 43%, the right coronary artery in 37%, the circumflex artery in 16%, a bypass graft in 2.3% and the left main stem in 1.4% of patients. The success rate (residual stenosis < 50%) of the intervention was 86%. There was a wide range of procedures per centre, with a median of 40 AMI angioplasties per year and centre. The amount of angioplasties for AMI in relation to all angioplasties performed during this period rose from 5.2% in 1992 to 5.9% in 1995 (p = 0.01). Local complications at the puncture site occurred in 3.2%, with the need for a surgical intervention in 1.1% of patients. In 273 (5.9%) of the patients a second angioplasty was performed during the hospital stay. Aortocoronary bypass surgery was performed in 3% of the patients. Hospital mortality was 9.5% (438/4625 patients). The mortality rate remained constant during the years investigated (1992: 10.6%; 1993: 8.6%; 1994: 9.7%; 1995: 9.8%; p = ns). Higher mortality was observed in older patients, patients with multiple vessel disease, the left anterior descending artery or a bypass graft as infarct related artery as well as in patients with failed reperfusion (residual stenoses > 50%). Hospitals with a case load of more than 40 angioplasties for AMI per year showed a lower mortality as compared to the others. In clinical practice at large community hospitals results of angioplasty for AMI concerning mortality, complications and technical success rate are comparable to those of highly specialised centres. The absolute numbers of angioplasties for AMI increased constantly over the years.     

Kinetocardiotocography--follow-up of diazepam poisoning

Report about continuous fetal monitoring of heart rate and movements 9-30 hours after diazepam-intoxication. in an early stage after intoxication fetal movements are associated with FHF-decelerations, later on with accelerations. A sinusoidal like pattern may be caused by fetal suckling movements.     

Seasonal variation of blood pressure and its relationship to ambient temperature in an elderly population

OBJECTIVE: To measure the magnitude and timing of seasonal variation of blood pressure and related factors in the elderly living in the community, and to assess their potential impact on cardiovascular risk. DESIGN: Prospective study; from January 1991 to February 1992 blood pressure and other variables were measured at 2-monthly intervals in each subject in their own homes. SUBJECTS: Ninety-six men and women, age range 65-74 years, recruited from a single group general practice in Cambridge. MAIN OUTCOME MEASURES: Seasonal variation of blood pressure, seasonal variation of prevalence of hypertension, seasonal variation of ambient temperature and body mass index. RESULTS: Both systolic (SBP) and diastolic blood pressure (DBP) were greatest during the winter across the whole distribution of blood pressure. There was a fourfold increase in the proportion of subjects with blood pressures > 160/90 mmHg in winter compared with in summer. Regression analysis revealed highly significant seasonal differences in both SBP and DBP. After adjustment for confounding seasonal effects, a 1 degree C decrease in living-room temperature was associated with rises of 1.3 mmHg in SBP and 0.6 mmHg in DBP. CONCLUSIONS: Seasonal variation of blood pressure is heightened in older adults and may partly explain the greater cardiovascular disease mortality of elderly subjects during the winter. The blood pressures of elderly people may be inversely related to the ambient temperature. The public health implications of these findings deserve further investigation.     

Uncertainty in Quantitative Electron Probe Microanalysis

Quantitative electron probe analysis is based on models based on the physics or x-ray generation, empirically adjusted to the analyses of specimens of known composition. Their accuracy can be estimated by applying them to a set of specimens of presumably well-known composition.     

Analysis of the Survivability of GaN Low-Noise Amplifiers

This paper presents a detailed analysis of the stressing mechanisms for highly rugged low-noise GaN monolithic-microwave integrated-circuit amplifiers operated at extremely high input powers. As an example, a low-noise amplifier (LNA) operating in the 3-7-GHz frequency band is used. A noise figure (NF) below 2.3 dB is measured from 3.5 to 7 GHz with NF<1.8 dB between 5-7 GHz. This device survived 33 dBm of available RF input power for 16 h without any change in low-noise performance. The stress mechanisms at high input powers are identified by systematic measurements of an LNA and a single high electron-mobility transistor in the frequency and time domains. It is shown that the gate dc current, which occurs due to self-biasing, is the most critical factor regarding survivability. A series resistance in the gate dc feed can reduce this gate current by feedback, and may be used to improve LNA ruggedness     

Synthesis of Aminopyridazines from Aminocyclopropenylium Salts and Diazomethyl Compounds [1]

Amino-substituted cyclopropenylium salts ( 11a,b ) react with diazomethyl compounds ( 12a-i ) in dichloromethane or acetonitrile in the presence of a base (ethyldiisopropylamine, 1,5-diazabicyclo[4.3.0] non-5-ene) to form 4-aminopyridazines ( 13a-i ) specifically. The reaction is interpreted in terms of an initial electrophilic diazoalkane substitution to give diazomethylcyclopropenes ( 11 + 12 → 14 ) which undergo a [1.5]-cyclisation to form the betaines 16 which, in turn, isomerise with opening of the bridging bond to give the aminopyridazines 13 . In a similar manner, the tris[amino] cyclopropenylium salts 8a,b and 10a-c are converted to the 3,4,5-tris[amino]-pyridazines ( 21a-k ) by treatment with diazomethyl compounds ( 12a, c-f ).     

Trypsin inhibitor activity of soybean as affected by genotype and fertilisation

The presence of protease inhibitors in soybean prohibits the utilisation of the raw beans for food and feed. However, little information is available about environmental influences and the effects of nitrogen and sulphur supply on the antinutritional constituents of soybean. As these factors may influence protease inhibitors, soybean genotypes segregated according to the presence or absence of the Kunitz trypsin inhibitor have been evaluated for trypsin inhibitor activity (TIA) in field trials. TIA was affected significantly by environment (geographical location), fertilisation treatment and genotype. Environmental means of TIA were between 69.5 and 104.8 mg g^?1. Nitrogen application, which caused an increase in seed protein content, resulted in a reduction in TIA by about 15% as compared with the control. Remarkably, simultaneous application of nitrogen and sulphur in the form of ammonium sulphate had a similar reductive effect on TIA to that of nitrogen application alone, although soybean protease inhibitors are rich in sulphur amino acids. Significant genetic variation in TIA was found both within the genotype class with the Kunitz inhibitor present as well as within the class lacking this inhibitor. The results suggest that TIA of soybean may be modified considerably by genetic improvement and appropriate agronomic management. Copyright © 2003 Society of Chemical Industry     

Case Study of an Aerosol Explosion and a Method to Determine Explosion Temperatures

A failure analysis case study is presented for a two-piece aerosol containing tetrafluoroethane, commonly referred to as Refrigerant 134a. A gentleman was preparing to recharge the air conditioning system of an automobile when the bottom exploded off the aerosol container, propelling the body of the aerosol container like a rocket, which hit the man in the eye and blinded him in that eye. The aerosol was never connected to the air conditioner, therefore backpressure from the air conditioner (AC) compressor was ruled out as a cause for the explosion. The objective of the study was to determine why the aerosol exploded. Several recently developed test methods were used, including two types of heat-to-burst tests and a puncture chamber to measure the pressure-versus-temperature behavior of aerosols. More common test methods were also used, such as water bath pressure tests, hydro pressure burst tests, pneumatic pressure burst tests, hardness measurements, weight measurements, metallography, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and an accident scenario recreation. A semi-empirical correlation between the hardness and weights of the container bottoms was used to determine the explosion temperature and/or pressure. This semi-empirical correlation agrees in principle with an analysis of the explosion pressures using finite-element analysis (FEA). The root cause for the explosion was determined to be a lack of strength of the bottom of the two-piece aerosol coupled with heating the aerosol to temperatures significantly above room temperature.