Piezoelectric glass-ceramics: Crystal chemistry,orientation mechanisms,and emerging applications

Piezoelectric materials have coupled mechanical and electrical energies and have long been used in devices for actuators, sensors, energy harvesters, frequency filters, and various additional applications. Piezoelectricity requires a non-centrosymmetric crystal structure and is therefore confined to materials that possess a periodic crystalline structure. Due to the non-crystalline nature of glass, piezoelectricity is fundamentally forbidden. However, one way to exploit piezoelectric properties in a glassy matrix is by developing glass-ceramics that possess controlled growth of a crystalline phase. Growth and orientation of piezoelectric crystals in a glassy matrix is a non-trivial process that has long been explored to combine the formability of glass with the thermal and mechanical resilience of glass-ceramics. While extensive work has been done in the field of functional glass-ceramics, the results are presented in isolated articles and a comprehensive review pertaining to symmetry breaking methods to exploit anisotropic properties in glass-ceramics has been absent from the literature. Here, we present a global review of the fundamental symmetry requirements for piezoelectricity, the development of polar, piezoelectric glass-ceramic compositions (specifically those with LiNbO₃ and fresnoite-based crystal phases), and various crystal growth and orientation mechanisms, including relevant kinetic and thermodynamic driving forces. Lastly, we discuss the challenges associated with implementing gradients to drive oriented crystal growth to develop non-centrosymmetry, and the need for future modeling work to produce adequate time-temperature-transformation (TTT) diagrams that take into account kinetic and thermodynamic driving forces for oriented crystal growth. Going beyond technical challenges, we conclude with an examination of current and potential applications for piezoelectric glass-ceramics that combine the formability of glass with the symmetry-dependent properties of ceramics.     

Map‐based Visualizations Increase Recall Accuracy of Data

We investigate the memorability of data represented in two different visualization designs. In contrast to recent studies that examine which types of visual information make visualizations memorable, we examine the effect of different visualizations on time and accuracy of recall of the displayed data, minutes and days after interaction with the visualizations. In particular, we describe the results of an evaluation comparing the memorability of two different visualizations of the same relational data: node‐link diagrams and map‐based visualization. We find significant differences in the accuracy of the tasks performed, and these differences persist days after the original exposure to the visualizations. Specifically, participants in the study recalled the data better when exposed to map‐based visualizations as opposed to node‐link diagrams. We discuss the scope of the study and its limitations, possible implications, and future directions.     

Relative Loss Bounds for On-Line Density Estimation with the Exponential Family of Distributions

We consider on-line density estimation with a parameterized density from the exponential family. The on-line algorithm receives one example at a time and maintains a parameter that is essentially an average of the past examples. After receiving an example the algorithm incurs a loss, which is the negative log-likelihood of the example with respect to the current parameter of the algorithm. An off-line algorithm can choose the best parameter based on all the examples. We prove bounds on the additional total loss of the on-line algorithm over the total loss of the best off-line parameter. These relative loss bounds hold for an arbitrary sequence of examples. The goal is to design algorithms with the best possible relative loss bounds. We use a Bregman divergence to derive and analyze each algorithm. These divergences are relative entropies between two exponential distributions. We also use our methods to prove relative loss bounds for linear regression.     

Effect of Safety and Environmental Variables on Task Durations in Steel Erection

In spite of the efforts by government agencies, labor organizations, and researchers in the field of health and safety, injuries and fatalities continue to affect the construction industry. In 2002 the construction industry had the undesirable distinction of having two of the most dangerous occupations in the United States, with fatalities among structural steel workers at 58.2 per 100,000 workers (fourth highest rate) and among construction laborers at 27.7 per 100,000 workers (ninth highest rate). Costs associated with construction accidents, such as increased insurance premiums and medical expenses, and loss of productivity are also concerns in the industry. It has not been demonstrated how unsafe working conditions affect worker performance, and the impact of unsafe work practices on worker performance has not been quantified. This paper describes a methodology that included direct observation of steel erection activities and statistical analysis of task duration data. The data collected at steel erection sites included safety conditions such as the use of personal protective equipment (PPE), elevation of the work area, environmental conditions such as temperature and humidity, and worker performance in the form of task durations. Analysis of variance (ANOVA) analysis of 186 of steel erection task durations collected over a six-month period showed that the use of personal protective equipment (PPE), the time of day during which the operation was being performed, the elevation at which the work was being performed, and the presence of decking below the work area had statistically significant effects on the durations of steel erection tasks.     

Evaluation of Agronomic and Seed Characteristics in Elevated Oleic Acid Soybean Lines in the South-Eastern US

Increasing oleic acid, a monounsaturated fatty acid, is reported to strike the best balance between cold flow properties and oxidative stability in soybean seed oil to enhance biodiesel and produce a better burning fuel. In addition, it is important that elevated oleic acid soybeans have the agronomic traits of local cultivars and maintain oleic acid stability across environments. Research was conducted in 2007–2008 to evaluate six Roundup Ready^® soybean recombinant inbred lines exhibiting enhanced levels of oleic acid. The six elevated oleic lines averaged a 55% increase in oleic acid and a 43% decrease in linolenic acid over the two commercial cultivars (AG3906 and AG4103). Some elevated oleic acid genotypes fulfilled the linear regression definition of a stable genotype. TN03-93RR was the best genotype because of its oleic acid content (397 g kg^?1) and desirable regression estimates for stability. Iodine value (IV), peroxide value (PV), and induction period (IP) were used to evaluate the fuel properties of the two lines with the highest oleic acid content and the two commercial cultivars. The elevated oleic acid lines had significantly better IP, PV and IV for better biodiesel properties and oxidative stability than the two commercial cultivars.     

Synthesis and Biological Activity of New Brassinosteroid Analogs of Type 24-Nor-5β-Cholane and 23-Benzoate Function in the Side Chain

Brassinosteroids are polyhydroxysteroids that are involved in different plants’ biological functions, such as growth, development and resistance to biotic and external stresses. Because of its low abundance in plants, much effort has been dedicated to the synthesis and characterization of brassinosteroids analogs. Herein, we report the synthesis of brassinosteroid 24-nor-5β-cholane type analogs with 23-benzoate function and 22,23-benzoate groups. The synthesis was accomplished with high reaction yields in a four-step synthesis route and using hyodeoxycholic acid as starting material. All synthesized analogs were tested using the rice lamina inclination test to assess their growth-promoting activity and compare it with those obtained for brassinolide, which was used as a positive control. The results indicate that the diasteroisomeric mixture of monobenzoylated derivatives exhibit the highest activity at the lowest tested concentrations (1 × 10⁻⁸ and 1 × 10⁻⁷ M), being even more active than brassinolide. Therefore, a simple synthetic procedure with high reaction yields that use a very accessible starting material provides brassinosteroid synthetic analogs with promising effects on plant growth. This exploratory study suggests that brassinosteroid analogs with similar chemical structures could be a good alternative to natural brassinosteroids.     

Perceptions of Neighbourhood Disorder and Reputation: Qualitative Findings from Two Contrasting Areas of an Australian City

Within Australian cities, social and economic inequalities manifest themselves spatially. Perceived neighbourhood disorder and neighbourhood reputation are relevant to considering the ways in which social and economic inequalities translate into place-based inequalities. This article explores the ways in which residents of two socio-economically contrasting urban areas describe and explain neighbourhood disorder and neighbourhood reputation. It draws upon qualitative data from 40 in-depth interviews, in addition to quantitative data from a postal survey. The qualitative findings highlighted how issues of neighbourhood disorder and reputation were intertwined. In both areas, participants sought to portray themselves and their neighbourhoods in positive ways, by attributing responsibility for neighbourhood disorder to people who were unlike themselves, and by highlighting places that were perceived to have worse reputations and higher levels of disorder. The findings are considered in light of Bourdieu's theory of capitals. This article indicates that both neighbourhood disorder and reputation are pathways through which social, economic and health inequities are maintained in urban areas.     

Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin‐film solar cells consisting of earth‐abundant and non‐toxic materials were made from pulsed chemical vapor deposition (pulsed‐CVD) of SnS as the p‐type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n‐type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were studied for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post‐deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Liquid / liquid ion-transfer processes at the dioctylphosphoric acid (N,N-didodecyl-N',N'-diethylphenylenediamine) / water (electrolyte) interface at graphite and mesoporous TiO2 substrates

Biphasic electrode systems are studied for the case of the oxidation of the water-insoluble liquid N,N-didodecyl-N',N'-diethylphenylenediamine (DDPD) neat and dissolved in bis(2-ethylhexyl) phosphate (HDOP) and immersed in aqueous electrolyte media. The oxidation process in the absence of HDOP is accompanied by transfer of the anion (perchlorate or phosphate) from the water into the organic phase. However, in the presence of HDOP, oxidation is accompanied by proton exchange instead. This electrochemically driven proton exchange process occurs over a wide pH range. Organic microdroplet deposits of DDPD in HDOP at basal plane pyrolytic graphite electrodes are studied by voltammetric techniques and compared in their behavior to organic microphase deposits in mesoporous TiO2 thin films. The mesoporous TiO2 thin film acts as a host for the organic liquid and provides an alternative biphasic electrode system compared to the random microdroplet/graphite system. Two types of mesoporous TiO2 thin-film electrodes, (i) a 300-400-nm film on ITO and (ii) a 300-400-nm film on ITO sputter-coated with a 20-nm porous gold layer, are investigated.