This paper presents an efficient method which provides the optimal generation mix and the optimal generation construction process. The approximation method in which the dynamic programming technique and gradient method are combined is applied to determine the optimal generation mix with hydropower generation technologies. The successive approximations dynamic programming (SADP) technique, which is very suitable for high-dimensional multistage decision process problems, is used for obtaining the optimal generation construction process. The effectiveness and feasibility of the developed technique are demonstrated on a practical power system model which has five types of generation technologies including a hydropower generation technology. 相似文献
The electrode characteristics of perovskite-type oxides, La0.6Sr0.4CoO3 and La0.6Sr0.4MnO3, on ceria-based oxide and stabilized zirconia were analysed by the a.c. impedance method. The ionic conductivities of the electrolyte and electrode conductivities from the a.c. impedance analysis agreed with those obtained from the current interruption and d.c. four-probe methods. Two semicircles from the charge transfer and diffusion processes appeared as the electrode resistance. The relative contribution of these two processes to the overall electrode resistance strongly depended on the microstructure of the electrode. The electrode microstructure could be controlled by the dispersion medium used for the electrode slurry. The La0.6Sr0.4MnO3 electrode coated with n-butyl acetate slurry exhibited the smallest electrode resistance. 相似文献
Using regression analyses between the properties of coals and the strengths of their cokes several significant correlations are derived, which are useful to evaluate coals in the making of metallurgical coke. Slight but significant modification was necessary for their application to coal blends. For example, plasticities of the coal blends required a different equation from that derived for the single coals. The region of high coke-strength in the diagram of volatile matter vs. total dilatation was expanded considerably towards coals of lower caking properties by blending of coals, suggesting that the blending may serve to increase the coking properties of component coals. The coke strength, especially after the gasification was found to increase with the increasing inert maceral content in the parent coals up to 30 wt %. The high level of strength was maintained even above 35 wt % of inert content. 相似文献
In this paper, we propose a new video conferencing system that presents correct gaze directions of a remote user by switching among images obtained from multiple cameras embedded in a screen according to a local user’s position. Our proposed method reproduces a situation like that in which the remote user is in the same space as the local user. The position of the remote user to be displayed on the screen is determined so that the positional relationship between the users is reproduced. The system selects one of the embedded cameras whose viewing direction towards the remote user is the closest to the local user’s viewing direction to the remote user’s image on the screen. As a result of quantitative evaluation, we confirmed that, in comparison with the case using a single camera, the accuracy of gaze estimation was improved by switching among the cameras according to the position of the local user.
The importance of grain size refinement in enabling superplasticity is reviewed, and the current understanding of grain boundary
characteristics is summarized. The application of orientation-imaging microscopy (OIM) methods to the processing response
and the deformation and failure modes in superplastic aluminum alloys are illustrated through microtexture analysis and determination
of grain boundary characteristics in selected commercial materials. Continuous and discontinuous recrystallization reactions
exhibit distinct microtextures and grain boundary characteristics. The application of OIM and microtexture analysis to the
evaluation of both deformation and failure mechanisms during superplastic forming is illustrated.
This paper was presented at the International Symposium on Superplasticity and Superplastic Forming, sponsored by the Manufacturing
Critical Sector at the ASM International AeroMat 2004 Conference and Exposition, June 8–9, 2004, in Seattle, WA. The symposium
was organized by Daniel G. Sanders, The Boeing Company. 相似文献
This paper deals with the fracture toughness and R-curve behavior of ceramic-metal functionally graded materials (FGMs). A possibility of stable crack growth in a three-point-bending specimen is examined based on the driving force and resistance for crack growth in FGMs, and the distribution of fracture toughness or R-curve behavior is evaluated on FGMs fabricated by powder metallurgy using partially stabilized zirconia (PSZ) and stainless steel (SUS 304). The materials have a functionally graded surface layer (FGM layer) with a thickness of 1 mm or 2 mm on a SUS 304 substrate. Three-point-bending tests are carried out on a rectangular specimen with a very short crack in the ceramics surface. On the three-point-bending test, a crack is initiated from a short pre-crack in unstable manner, and then it propagates in stable manner through the FGM layer with an increase in the applied load. From the relationship between applied load and crack length during the stable crack growth in the FGM layer, the fracture toughness is evaluated. The fracture toughness increases with an increase in a volume fraction of SUS 304 phase. 相似文献
This paper proposes an alternating bending technique for evaluating fatigue life in the low‐to‐high cycle fatigue regime. A method was developed for estimating the stress, elastic strain, and plastic strain ranges of a plastically deformed specimen subjected to alternating bending with consideration of stress and strain distributions. To evaluate its effectiveness, fatigue testing was conducted using a specimen made of a steel used for pressure vessels. The stress, elastic strain, and plastic strain ranges could be obtained during cyclic bending. The elastic strain amplitude life and plastic strain amplitude life curves were linear in a log–log plot in the low‐to‐high cycle fatigue regime. Hence, the fatigue life under alternating bending could be evaluated using the proposed strain‐based approach. However, these curves could not be predicted using equations with parameters obtained from tensile testing, such as the universal slope method, due to the strain gradient in the specimen. 相似文献