针对医疗设备的精确电池备份

本文通过测试测量方案介绍了如何进行医疗设备的精确电池备份。     

Modelling biological processes under anaerobic conditions through integrating titrimetric and off-gas measurements-applied to EBPR systems.

An innovative method for modelling biological processes under anaerobic conditions is presented and discussed. The method is based on titrimetric and off-gas measurements. Titrimetric data is recorded as the addition rate of hydroxyl ions or protons that is required to maintain pH in a bioreactor at a constant level. An off-gas analysis arrangement measures, among other things, the transfer rate of carbon dioxide. The integration of these signals results in a continuous signal which is solely related to the biological reactions. When coupled with a mathematical model of the biological reactions, the signal allows a detailed characterisation of these reactions, which would otherwise be difficult to achieve. Two applications of the method to the enhanced biological phosphorus removal processes are presented and discussed to demonstrate the principle and effectiveness of the method.     

Distraction effects on muscle. Leg lengthening studied in rabbits

We investigated changes in the anterior tibial muscle during lengthening of the lower leg in rabbits. In 37 rabbits, an osteotomy of the right middle tibia was performed and was fixed by a unilateral external fixator. The rabbits were randomized into 6 groups. In groups 1, 2, and 3 the tibiae were distracted 0.5 mm/day. In groups 1 and 2, the rabbits were killed after 14 and 28 days of distraction, respectively, and in group 3 after 28 days of distraction, followed by 14 days of rest. Groups 1a, 2a, and 3a served as controls. They were treated similarly as groups 1, 2, and 3, but no distraction was performed. Proliferating cell nuclei were labeled with 5-bromo-2-deoxyuridine and were identified by immunohistochemical staining. The weight of the muscle was measured. During bone lengthening the muscle showed signs of growth, as indicated by increasing weight and number of proliferating cell nuclei. This was observed only during lengthening and it ceased when the lengthening was stopped.     

A fuzzy logic rule-based automatic target recognizer

Methods for modeling and managing uncertainty in computer vision systems have received increased attention in recent years. Automatic target recognition is one application area of computer vision where the demands are particularly acute. In this article, fuzzy logic is proposed as a means of handling uncertainty in an expert system structure for automatic target recognition. A new technique for logical inference is described which is well-suited for this type of application. A prototype system has been developed and tested on multisensor and temporal images. the results are compared to a similar expert system which used a numeric uncertainty calculus.     

Crack growth measurements on components under cyclic loading: comparison of different methods

The cyclic crack growth behaviour was measured by means of d.c. potential drop, a.c. potential drop, ultrasonic and crack-opening displacement (COD) methods. The methods were applied to component tests on straight pipes with an outer diameter of approximately 800 mm and a wall thickness of approximately 50 mm. The pipes were subjected to constant internal pressure (about 15 MPa) and either an alternating (or pulsating) or a quasi-static bending moment using d.c. potential drop, a.c. potential drop, ultrasonic and flaw-opening (COD) methods. The efficiency of the particular methods has been proved by comparison with fractographical analysis of the fracture surfaces.     

High-power passively mode-locked semiconductor lasers

We have developed optically pumped passively mode-locked vertical-external-cavity surface-emitting lasers. We achieved as much as 950 mW of mode-locked average power in chirped 15-ps pulses, or 530 mW in 3.9-ps pulses with moderate chirp. Both lasers operate at a repetition rate of 6 GHz and have a diffraction-limited output beam near 950 nm. In continuous-wave operation, we demonstrate an average output power as high as 2.2 W. Device designs with a low thermal impedance and a smooth gain spectrum are the key to such performance. We discuss design and fabrication of the gain structures and, particularly, their thermal properties     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

On the microhardness testing of electrically stressed poly(phenylene oxide): Polystyrene blends

Microhardness measurements have been performed on untreated (virgin) and electrically stressed, solvent‐cast laboratory‐prepared samples of pure poly(phenylene oxide) (PPO), pure polystyrene (PS), and PPO : PS polyblends with different weight proportions. Results of such measurement on untreated polyblend sample show that microhardness (H_v) increases with increase in the content of PS up to 10 wt %, which attributed to the existence of homogeneous phase morphology. However, this feature is not observable in samples containing higher content of PS. Electrical stress is found to modify considerably the mechanical property of polymer. The effect of electric field on the microhardness of such samples (PPO : PS :: 90 : 10) has been characterized by the existence of a peak. Trapping of charge carriers in electrically stressed samples imparts hardening to the polyblend up to an applied step field of 190 kV/cm. However, the excessive charging beyond this step field value destroys this characteristic. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Inhibition of NFkappaB activity through maintenance of IkappaBalpha levels contributes to dihydrotestosterone-mediated repression of the interleukin-6 promoter

Androgens repress expression of many genes, yet the mechanism of this activity has remained elusive. The cytokine, interleukin-6, is active in a variety of biological systems, and its expression is repressed by androgens. Accordingly we dissected the mechanism of androgen's ability to inhibit interleukin-6 expression at the molecular level. In a series of co-transfection assays, we found that 5alpha-dihydrotestosterone, through the androgen receptor, repressed activation of the interleukin-6 promoter, in part, by inhibiting NFkappaB activity. It did not appear that 5alpha-dihydrotestosterone inhibited NFkappaB by activating the androgen receptor to compete for the NFkappaB response element as we could not detect androgen receptor binding to the IL-6 promoter by DNase I footprinting assay. However, by electrophoretic mobility shift assay we found that 5alpha-dihydrotestosterone repressed formation of NFkappaB middle dotNFkappaB response element complex formation. In LNCaP prostate carcinoma cells, 5alpha-dihydrotestosterone achieved this effect through maintenance of IkappaBalpha protein levels in the face of phorbol ester, a stimulus that results in IkappaBalpha degradation. Finally, we confirmed that IkappaBalpha inhibits NFkappaB-mediated activation of the interleukin-6 promoter. These data suggest that maintenance of IkappaBalpha levels may represent the first identified mechanism for androgen-mediated repression of a natural androgen-regulated gene.