Effects of upholstery materials on the burning behavior of real‐scale residential upholstered furniture mock‐ups

Fire spread and growth on real‐scale four cushion mock‐ups of residential upholstered furniture (RUF) were investigated with the goal of identifying whether changes in five classes of materials (barrier, flexible polyurethane foam, polyester fiber wrap, upholstery fabric, and sewing thread), referred to as factors, resulted in statistically significant changes in burning behavior. A fractional factorial experimental design plus practical considerations yielded a test matrix with 20 material combinations. Experiments were repeated a minimum of two times. Measurements included fire spread rates derived from video recordings and heat release rates (HRRs). A total of 13 experimental parameters (3 based on the videos and 10 on the HRR results), referred to as responses, characterized the measurements. Statistical analyses based on Main Effects Plots (main effects) and Block Plots (main effects and factor interactions) were used. The results showed that three of the factors resulted in statistically significant effects on varying numbers of the 13 responses. The Barrier and Fabric factors had the strongest main effects with roughly comparable magnitudes. Foam was statistically significant for fewer of the responses and its overall strength was weaker than for Barrier and Fabric. No statistically significant main effects were identified for Wrap or Thread. Multiple two‐term interactions between factors were identified as being statistically significant. The Barrier*Fabric interaction resulted in the highest number of and strongest statistically significant effects. The existence of two‐term interactions means that it will be necessary to consider their effects in approaches designed to predict the burning behavior of RUF.     

A mini review on two-dimensional nanomaterial assembly

Two-dimensional (2D) nanomaterials have attracted a great deal of attention since the discovery of graphene in 2004, due to their intriguing physicochemical properties and wide-ranging applications in catalysis, energy-related devices, electronics and optoelectronics. To maximize the potential of 2D nanomaterials for their technological applications, controlled assembly of 2D nanobulding blocks into integrated systems is critically needed. This mini review summarizes the reported strategies of 2D materials-based assembly into integrated functional nanostructures, from in-situ assembly method to post-synthesis assembly. The applications of 2D assembled integrated structures are also covered, especially in the areas of energy, electronics and sensing, and we conclude with discussion on the remaining challenges and potential directions in this emerging field.

     

A model for evaluation and administration of security inobject-oriented databases

The integration of object-oriented programming concepts with databases is one of the most significant advances in the evolution of database systems. Many aspects of such a combination have been studied, but there are few models to provide security for this richly structured information. We develop an authorization model for object-oriented databases. This model consists of a set of policies, a structure for authorization rules, and algorithms to evaluate access requests against the authorization rules. User access policies are based on the concept of inherited authorization applied along the class structure hierarchy. We propose also a set of administrative policies that allow the control of user access and its decentralization. Finally, we study the effect of class structuring changes on authorization     

Thoracic electric impedance and fluid balance during aortic surgery

Indices of fluid balance were evaluated during and after aortic surgery in 16 consecutive patients. Thoracic electrical impedance (TI), heart rate (HR), central venous (CVP), pulmonary artery mean (PAMP), pulmonary wedge (PWP) and mean arterial (MAP) pressures as well as fourteen arterial and venous blood gas variables were followed. Consistent with a reduction of TI during the operation, fluid balance was in excess, and it remained elevated on the first postoperative morning. The HR, MAP and PWP remained stable, while CVP and PAMP decreased. Of the determined variables only TI revealed a meaningful correlation to fluid balance (rho = -0.41; p < 0.01). The results indicate that while central venous and pulmonary artery mean pressures gave the impression of a volume deficit, the positive fluid balance was mirrored by thoracic electrical impedance.     

A new monitoring system for piping systems in fossil fired power plants

A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:

1. 1. the inclusion of creep relaxation

2. 2. the inclusion of external loads on components

3. 3. a more accurate method of calculating thermal stresses due to temperature transients

4. 4. the inclusion of high cycle fatigue terms.

The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.

The site testing provided good practical experience and showed up problems which would not otherwise have been detected.     

Process issues in treatment: Application to sexual offender programs.

How critical is the therapeutic alliance in the treatment of sexual offenders? To date such process issues have been neglected in the field of sex offender treatment. This article reviews the literature on the influence on behavior change of therapist features, clients' perceptions, and the therapeutic alliance. Among the many therapist features identified as helpful are empathy, warmth, and being directive and rewarding. Therapists who are aggressively confrontational appear not to foster beneficial changes in their clients. These issues are directly related to treatment issues faced by therapists who work with sexual offenders, such as dealing with cognitive distortions, lack of empathy, and lack of motivation to change. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Treatment of the sequelae of enucleation by septal chondro-mucosal composite graft. Report of 21 cases]

Enucleation frequently and progressively causes an enophtalmus and atrophia of the inferior eyelid, thereby leading to a height deficiency. Buccal mucous grafts give rise to phenomena such as secondary retraction. This may have complex and painful post-operative outcomes. However, when a septal chondromucous graft is performed, the height in the inferior palpebral part becomes more aesthetic, more retentive and quickly allows the wearing of a more voluminous prosthesis. Thus, the notinable enophtalmus can be corrected and the aesthetic quality of the looking is substantially restored. The authors report this surgical procedure and the results obtained with 21 patients which appear to be particularly promising.     

DMD-specific FISH probes are diagnostically useful in the detection of female carriers of DMD gene deletions

The challenge of Duchenne muscular dystrophy (DMD) carrier identification resides in the ability to identify the presence of a mutant gene over the background contributed by the normal allele. Current diagnosis of carrier status when a deletion has been identified in a proband is based on an analysis of a gene dosage. We present a diagnostic strategy that uses fluorescence in situ hybridization (FISH) to detect female carriers with major deletions in the dystrophin gene. We screened a human X-chromosome-derived genomic library with a full-length dystrophin cDNA and isolated 15 dystrophin-specific cosmids that contain DMD gene exons. Six cosmids were further tested as FISH probes in control individuals and subsequently applied on chromosomes from eight males with DMD and known deletions and on samples from three female carriers. As expected, X chromosomes in normal females displayed four signals, two for the DMD-specific probe and two for the X-chromosome centromeric probe. Hybridization on chromosomal spreads from carriers of deletions revealed only one signal from the DMD-specific probe and two from the control centromeric probe. Males carrying deletions showed no DMD-specific signal for the deleted exons tested. Our data indicate that FISH could represent an alternative method for the detection of female carriers with DMD gene deletions.