无油润滑压缩机活塞环和支承环设计

通过对填充聚四氟乙烯材料活塞环及带卸荷槽结构支承环的研究 ,确定了活塞及活塞环结构 ,建立了带卸荷槽支承环的力学分析模型 ,并将其结果用于结构尺寸的确定。在压缩机工艺指标不变的情况下 ,用该方法设计的活塞环和支承环性能优良。     

PIM卧管式三旋在催化裂化装置上的应用

分析了PIM卧管式三旋在催化装置应用过程中所出现的问题 ,并且有针对性地进行了改造 ,取得了良好的效果     

Williams高压旋转防喷器国产化要点浅析

旋转防喷器是欠平衡钻井的关键井控设备之一，现文以Williams7100型高压旋转防喷器为例，分析了其壳体总成、旋转总成以及钻具密封的设计分析要点，旨在推动该装置的国产化进程。     

瓦斯燃烧器回流区测试

燃烧器流场内回流区的大小和形状决定了燃烧火焰的稳定性 ,利用APV激光测速系统 ,在燃烧器冷态测试实验装置上对一瓦斯燃烧器冷态模型的流动进行了研究 ,发现了该燃烧器流场内的双回流区结构 ,并得到了中心回流区尺寸与稳焰器结构的关系 ,为该结构类型燃烧器的稳焰设计及稳焰能力的评价提供了实验依据     

修正步冷温度曲线试验研究

按修正步冷温度曲线对经步冷脆化的 2 .2 5Cr 1Mo和在加氢反应器内运行 5a的 2 2 5Cr 1Mo试块进行了修正步冷试验 ,评定了材料的回火脆性。结果表明 ,按修正步冷曲线进行修正步冷试验能使已经脆化的材料进一步脆化 ,为加氢反应器材料损伤的研究提供了一条途径。     

On the generalized successive approximations method

In this paper, denoted a continuous function from [0,1]² into [0,1] by f, we consider the iterative process:

Some Experiences of Using Different Analytical Methods in Screening for Oil and Protein Content in Rapeseed

In this study some analytical methods, which have been used in oil crop breeding, are compared from the point of view of plant breeding. For oil content determination a gravimetric method, NMR and NIR have been used. Protein content has been determined by the classical Kjeldahl technique, by the Biuret method and by NIR. The results indicate that the NIR spectroscopy is specially useful in screening breeding materials. This method enables the breeder to select for several quality characters simultaneously at a high speed and at a low cost. Since NIR spectroscopy is nondestructive, the same seed lot can be used for analysis and planting. Thus it is possible to select on a large scale for single plants.     

A study of sulfur bridges in filled natural rubber vulcanizates by pyrolysis gas chromatography with flame-photometric detection

Natural rubber vulcanizates of two formulations, with sulfur/N-cyclohexyl-2-benzothiazolesulfenamide (CBS) and tetramethylthiuram disulfide (TMTD), respectively, were analyzed by pyrolysis gas chromatography. A sulfur-selective flame-photometric detector was utilized. The main pyrolysis products were identified as CS₂ and some thiophenes. The yields of the pyrolysis products from the two types of rubber were very different. The yields also varied with the curing time of the rubbers.