Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

 An efficient finite element model is presented for the static and dynamic piezothermoelastic analysis and control of FGM plates under temperature gradient environments using integrated piezoelectric sensor/actuator layers. The properties of an FGM plate are functionally graded in the thickness direction according to a volume fraction power law distribution. A constant displacement-cum-velocity feedback control algorithm that couples the direct and inverse piezoelectric effects is applied to provide active feedback control of the integrated FGM plate in a closed loop system. Numerical results for the static and dynamic control are presented for the FGM plate, which consists of zirconia and aluminum. The effects of the constituent volume fractions and the influence of feedback control gain on the static and dynamic responses of the FGM plates are examined. Received: 13 March 2002 / Accepted: 5 March 2003 The work described in this paper was supported by a grant awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 1024/01E).     

A framework for characterizing disaster-based network survivability

This paper formulates a general framework that includes and extends the existing definitions for network survivability. Based on this framework, network survivability is characterized by a survivability function rather than a single-value survivability measure, and various quantities of interest can be derived from the function. Examples are the expected survivability, the worst-case survivability, the r-percentile survivability, and the probability of zero survivability. The survivability function is especially useful for the study of large-scale disasters. For illustration, the authors derive the survivability function in closed form for a simple ring network under link failures. They also discuss the general procedure for finding survivability functions for complex networks, and show that the survivability function reveals useful information about a network. This framework provides a unified and practical approach to analyzing and designing highly survivable communications networks     

Children's Physiological Indices of Empathy and Their Socioemotional Adjustment: Does Caregivers' Expressivity Matter?

Relations of heart rate and skin conductance reactions to mildly evocative empathy-inducing slides with socioemotional functioning were examined for 154 children (mean age = 9 years, 5 months). In addition, maternal expressivity was tested as a moderator of these relations. Parents and teachers rated children's socioemotional functioning, and a behavioral measure of children's regulation was obtained. Boys who exhibited higher skin conductance and higher heart rate to slides depicting negative emotions were better regulated, less emotionally intense, and better adjusted than their peers. Furthermore, boys' regulation and adjustment were positively related to such physiological responding to negative slides if maternal negative expressivity was relatively low or moderate, but not high. Fewer findings were obtained for girls or for positive slides. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An extraction method to determine interconnect parasitic parameters

Interconnect parasitic parameters in integrated circuits have significant impact on circuit speed. An accurate monitoring of these parameters can help to improve interconnect performance during process development, provide information for circuit design, or give useful reference for circuit failure analysis. Existing extraction methods either are destructive (such as SEM measurement) or can determine only partial parasitic parameters (such as large capacitor measurement). In this paper, we present a new method for extracting interconnect parasitic parameters, which can simultaneously determine the interlayer and intralayer capacitances, line resistance, and effective line width. The method is based on two test patterns of the same structure with different dimensions. The structure consumes less wafer area than existing methods. The method shows good agreement with SEM measurement of dielectric thickness in both nonglobal planarized and chemical-mechanical polished processes, and gives accurate prediction of the process spread of a ring oscillator speed over a wafer     

An efficient microfluidic sorter: implementation of double meandering micro striplines for magnetic particles switching

The ability to trap, manipulate, and separate magnetic beads has become one of the key requirements in realizing an integrated magnetic lab-on-chip biosensing system. In this article, we present the design and fabrication of an integrated magneto-fluidic device for sorting magnetic particles with a sorting efficiency of up to 95%. The actuation and manipulation of magnetic beads are realized using microfabricated square meandering current-carrying micro striplines. The current is alternated between two neighboring micro striplines to switch the magnetic beads to either one of the two outlets. We performed a series of parametric study to investigate the effect of applied current, flow rate, and switching frequency on the sorting efficiency. Experimental results reveal that the sorting efficiency is proportional to the square of current applied to the stripline, and decreases with increasing buffer flow rate and switching frequency. Such phenomena agree well with our theoretical analysis and simulation result. The fastest switching rate, which is limited by the microchannel geometry and bead velocity, is 2 Hz.     

A meshfree Hermite‐type radial point interpolation method for Kirchhoff plate problems

A meshfree computational method is proposed in this paper to solve Kirchhoff plate problems of various geometries. The deflection of the thin plate is approximated by using a Hermite‐type radial basis function approximation technique. The standard Galerkin method is adopted to discretize the governing partial differential equations which were derived from using the Kirchhoff's plate theory. The degrees of freedom for the slopes are included in the approximation to make the proposed method effective in enforcing essential boundary conditions. Numerical examples with different geometric shapes and various boundary conditions are given to verify the efficiency, accuracy, and robustness of the method. Copyright © 2005 John Wiley & Sons, Ltd.     

A boundary element-free method (BEFM) for three-dimensional elasticity problems

This study combines the boundary integral equation (BIE) method and improved moving least-squares (IMLS) approximation to present a direct meshless boundary integral equation method, the boundary element-free method (BEFM) for three-dimensional elasticity. Based on the improved moving least-squares approximation and the boundary integral equation for three-dimensional elasticity, the formulae of the boundary element-free method are given, and the numerical procedure is also shown. Unlike other meshless boundary integral equation methods, the BEFM is a direct numerical method in which the basic unknown quantity is the real solution of the nodal variables, and the boundary conditions can be applied directly and easily, thus giving it a greater computational precision. Three selected numerical examples are presented to demonstrate the method.Aknowledgement The work in this project was fully supported by a grant from the Research Grants Council (RGC) of the Hong Kong Special Administrative Region, China (Project No. CityU 1011/02E).The work that is described in this paper was supported by Project No. CityU 1011/02E, which was awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China. The authors are grateful for the financial support.     

Boundary element‐free method (BEFM) for two‐dimensional elastodynamic analysis using Laplace transform

In this paper, we present a direct meshless method of boundary integral equation (BIE), known as the boundary element‐free method (BEFM), for two‐dimensional (2D) elastodynamic problems that combines the BIE method for 2D elastodynamics in the Laplace‐transformed domain and the improved moving least‐squares (IMLS) approximation. The formulae for the BEFM for 2D elastodynamic problems are given, and the numerical procedures are also shown. The BEFM is a direct numerical method, in which the basic unknown quantities are the real solutions of the nodal variables, and the boundary conditions can be implemented directly and easily that leads to a greater computational precision. For the purpose of demonstration, some selected numerical examples are solved using the BEFM. Copyright © 2005 John Wiley & Sons, Ltd.