A novel silicon Schottky diode for NLTL applications

The design and simulation of a novel silicon Schottky diode for nonlinear transmission line (NLTL) applications is discussed in this paper. The Schottky diode was fabricated on a novel silicon-on-silicide-on-insulator (SSOI) substrate for minimized series resistance. Ion implantation technology was used as a low-cost alternative to molecular beam epitaxy to approximate the delta (/spl delta/) doping profile, which results in strong nonlinear CV characteristics. The equivalent circuit model of the Schottky diode under reverse bias conditions was extracted from the S-parameter measurement performed on the diode. The measured CV characteristics show strong nonlinearity, the junction capacitance varies from 182 to 47.5 fF as the reverse bias voltage is varied from 0 to -5 V. A parasitic inductance of 40 pH was measured for the silicon Schottky diode, which is much smaller than a comparable sized GaAs Schottky diode. This small inductance is an advantage for the silicon Schottky diode offering improvement in the silicon NLTL performance.     

Thick-film hybrid technology for low-output-voltage DC/DC converter

The new requirements in portable and telecommunication equipment also affect the supply systems. The current tendency to lower the output voltage (3.3, 2.7 V/sub DC/) together with the necessity of an important size reduction is modifying the strategies for dc/dc converter implementation. Low-voltage high-power-density applications present two important factors that must be analyzed: thermal problems due to high power density, and the high currents to be handled. This paper presents a 10-W dc/dc buck converter with passive integration using hybrid technology (within the frame of ESPRIT Project 23910.). As a result of the mentioned integration technique, a power density of 6.25 W/cm/sup 3/ was obtained with high efficiency (approximately 90%).     

A framework for identifying differences and similarities in the managerial competencies associated with different modes of product life extension

It has been noted in the past that economically sound, environmentally preferable life extension modes such as remanufacturing and recycling have special characteristics that complicate the management of their production, logistics and associated operations. This paper considers these complicating characteristics from the perspective of the nine different modes of product life extension. In doing so, a framework and guide is provided to what issues, resource requirements and management capabilities are required for specific life extension modes. This framework provides guidance to practitioners and academics on commonalities between different product life extension modes, thereby assisting practitioners in leveraging current internal skills and capabilities and researchers in determining the generalizability of research.     

Liquid Crystal Tunable mm Wave Frequency Selective Surface

A frequency selective surface (FSS) which exploits the dielectric anisotropy of liquid crystals to generate an electronically tunable bandpass filter response at D Band (110-170 GHz) is presented. The device consists of two printed arrays of slot elements which are separated by a 130-mum thick layer of liquid crystals. A 3% shift in the filter passband occurs when the substrate permittivity is increased by applying a control signal of 10 V. Measured results show that the insertion loss increases from -3.7 dB to -10.4 dB at resonance (134 GHz), thus demonstrating the potential to create a FSS which can be switched between a transmitting and a reflecting structure.     

Social networks and the implementation of environmental technology

A study of 83 firms in the North American electronics industry that have implemented environmentally “clean” process technology found that social networks have a significant positive impact on implementation success. This paper presents evidence that some types of social networks influence implementation success more than others. More specifically, interfirm networks composed of both suppliers and competitors were significantly correlated with the routinization and incorporation of alternative technical solutions to reducing ozone depleting chlorofluorocarbons (CFCs). This only held in situations where the complexity of the implementation was relatively high. Intrafirm and local social networks were not significant. The utilization of a network of publicly accessible sources of information and expertise had a negative impact. Brief case studies from field research are provided to help explain these results     

A predictive model to determine the effects of pH, milkfat, and temperature on thermal inactivation of Listeria monocytogenes.

Listeria monocytogenes is a foodborne pathogen of significance because of its comparatively high heat resistance, zero tolerance in ready-to-eat foods, and growth at refrigeration temperatures. A 3 x 3 x 3 factorial study was done to determine the effects of milkfat (0%, 2.5%, 5.0%), pH (5.0, 6.0, 7.0), and processing temperature (55 degrees C, 60 degrees C, 65 degrees C) on the thermal resistance of L. monocytogenes in a formulated and homogenized milk system. Data were fit to a modified Gompertz equation where parameter estimates characterized three regions of a survival curve: the shoulder, maximum slope, and tail. Statistical analysis was done for each of the 27 individual treatment sets to visualize individual effects on parameter estimates and to evaluate how well the Gompertz equation represented the data. A regression model for the Gompertz equation was generated to predict the logarithmic surviving fraction of L. monocytogenes based on all 27 treatments and their single and interactive effects. The shoulder region of the survival curve was affected by pH; however, the maximum slope was affected by temperature, milkfat, and the interaction of temperature x milkfat. Validation of the model suggests that the predictions are best suited for processing above 62 degrees C. Trends over time for a 4-log reduction in cells (4D values) were evaluated using results from the 27 individual treatment sets, the regression model for the Gompertz equation, and a linear equation. At lower temperatures, 4D values by the three methods varied by twofold. At higher temperatures, all methods gave similar 4D values, suggesting that death became more linear. Based on this study all three factors affect heat resistance for specific regions of a survival curve, and a predictive model was developed that can be used as a preliminary estimate for L. monocytogenes inactivation.     

Judgment under emotional certainty and uncertainty: The effects of specific emotions on information processing.

The authors argued that emotions characterized by certainty appraisals promote heuristic processing whereas emotions characterized by uncertainty appraisals result in systematic processing. The 1st experiment demonstrated that the certainty associated with an emotion affects the certainty experienced in subsequent situations. The next 3 experiments investigated effects on processing of emotions associated with certainty and uncertainty. Compared with emotions associated with uncertainty, emotions associated with certainty resulted in greater reliance on the expertise of a source of a persuasive message in Experiment 2, more stereotyping in Experiment 3, and less attention to argument quality in Experiment 4. In contrast to previous theories linking valence and processing, these findings suggest that the certainty appraisal content of emotions is also important in determining whether people engage in systematic or heuristic processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)