Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Optimization of flow in additively manufactured porous columns with graded permeability

Chemical engineering systems often involve a functional porous medium, such as in catalyzed reactive flows, fluid purifiers, and chromatographic separations. Ideally, the flow rates throughout the porous medium are uniform, and all portions of the medium contribute efficiently to its function. The permeability is a property of a porous medium that depends on pore geometry and relates flow rate to pressure drop. Additive manufacturing techniques raise the possibilities that permeability can be arbitrarily specified in three dimensions, and that a broader range of permeabilities can be achieved than by traditional manufacturing methods. Using numerical optimization methods, we show that designs with spatially varying permeability can achieve greater flow uniformity than designs with uniform permeability. We consider geometries involving hemispherical regions that distribute flow, as in many glass chromatography columns. By several measures, significant improvements in flow uniformity can be obtained by modifying permeability only near the inlet and outlet.     

Transjugular intrahepatic portosystemic shunts (TIPS) in children

The transjugular intrahepatic portosystemic shunt procedure is an accepted treatment for adults with complications of portal hypertension. We performed a retrospective review of all pediatric TIPS placements performed at the University of California, San Francisco between 1990 and 1996. Twelve procedures were attempted in nine children, with a mean age (+/- SD) of 9.4 +/- 3.9 years (range, 5 to 15 years) and a mean weight of 31 +/- 18 kg (range, 16 to 70 kg). The indications for TIPS placement were portal hypertension complicated by chronic variceal hemorrhage not controlled with sclerotherapy (n = 7) and hypersplenism with thrombocytopenia (n = 2). TIPS placement was successfully completed initially in seven of nine (78%) patients. Unfavorable vascular anatomy was the cause of failure in two cases. The seven patients who underwent successful TIPS placement were followed up for an average of 136 days (range, 1 to 800 days); two still have patent shunts, three underwent liver transplantation, one had a splenorenal shunt after stenosis, and one died of underlying liver disease. Variceal bleeding was controlled in four of five patients who successfully underwent TIPS placement. Shunt occlusion occurred in four patients; patency was restored by transjugular shunt revision in three, and a splenorenal shunt was performed in one.     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

The CD40-CD154 system in anti-infective host defense

Research in the past few years has documented significant advances in our understanding of the CD40-CD40 ligand (CD154) system in diverse immune functions. This system influences many T cell mediated inflammatory immune responses and effector functions, unmasking a previously unexpected role for CD40-CD154 in cell mediated immunity. Manipulation of CD154 in animal models of infection by the use of CD154-deficient mice or anti-CD154 antibodies has shown the importance of this system in the initiation of the inflammatory response, in the activation of antigen-presenting cells and in resistance to infections.     

A linkage map of human chromosome 21:43 PCR markers at average intervals of 2.5 cM

A genetic linkage map of human chromosome 21q (HC21q) containing 43 markers genotyped by the polymerase chain reaction in the CEPH pedigrees is presented. The markers placed on this map are highly polymorphic with an average heterozygosity of 61%. The average interval size of the markers localized at 1000:1 odds is 2.5 cM. The map has a total length of 65.5 cM, with male and female lengths of 47.7 and 83.3 cM, respectively. The genotypes used in the construction of this map were subjected to rigorous error checking, which is reflected in the shorter map length compared to previous maps; the estimated error rate in genotyping is less than 0.04%. As noted in previous linkage maps there is increased recombination in females on proximal HC 21q and in the male in a region near the telomere. This map of HC 21 represents a highly informative and dense meiotic linkage map and will be useful in linking disease phenotypes to loci on this chromosome.