Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Length of maternity leave and quality of mother-infant interactions

The aim of this study was to assess the association between the length of maternity leave and the quality of mother-infant interactions; 198 employed mothers of 4-month-old infants were interviewed and videotaped in their homes during a feeding time. Hierarchical multiple regression analyses indicated a direct association between shorter length of leave and more negative affect and behavior in maternal interactions with their infants. Infant and mother stressor/protective variables added significantly in predicting the quality of the mother-infant relationship. There were also significant interaction effects between the length of leave and these variables. Mothers who either reported more depressive symptoms or who perceived their infant as having a more difficult temperament and who had shorter leaves, compared with mothers who had longer leaves, were observed to express less positive affect, sensitivity, and responsiveness in interactions with their infants. The public policy implications of the relation between length of maternity leave, maternal and infant individual differences, and the quality of mother-infant interactions are discussed.     

Cadaver lungs for transplantation. Effect of ventilation with alveolar gas

In an effort to increase the donor pool for lung transplantation (LTX), we have demonstrated the feasibility of LTX from circulation-arrested cadavers in a canine LTX model. We hypothesized that ventilation of the cadaver lung with alveolar gas (20% O2, 5% CO2, balance N2) (AG) would be superior to ventilation with 100% oxygen (O2) after circulatory arrest of the donor. Twelve mongrel dogs were intubated, heparinized and euthanized by pentothal injection and ventilated with AG (n=6) or O2 (n=6). Four hours later, donor animals underwent sternotomy, and the lungs were flushed with cold modified Euro-Collins solution, harvested, and stored inflated in ice slush. Left lung allotransplantation was performed, and recipients were made dependent o n the transplanted lung by occlusion of the contralateral bronchus and pulmonary artery. Recipient animals were ventilated with an FiO2 of 0.4 and followed for 8 hr. Total ischemic time was 7.9 hr for both groups. Pulmonary edema developed in all recipients of AG lungs; one recipient survived the 8-hr observation period with poor oxygenation. In contrast, three of six recipients of O2-ventilated lungs survived for 8-hr with excellent gas exchange. Specimens of donor lungs before and after transplant were evaluated histologically utilizing trypan blue exclusion as an indicator of cell viability. At the time of organ retrieval 4 hr after death, 6% of cells were nonviable in the O2-ventilated cadaver lungs. Circulation-arrested cadaver lungs ventilated with 100% O2 prior to organ retrieval have superior pulmonary function after transplant compared with lungs ventilated with AG. Ventilation of cadaver lungs with AG induces pulmonary injury in this model. retrieval of donor lungs from circulation-arrested cadavers has potential for increasing the pulmonary donor pool.     

Implementation of computerized social work data base/assessments

The Department of Veterans Affairs, Social Work Service has designed, developed and implemented the Social Work Information Management System (SWIMS) which provides for the collection and reporting of both administrative and clinical information. This paper describes the implementation of one component of SWIMS, the automated Social Work Data Base/Assessment. The discussion details the implementation process and discusses issues encountered in the implementation of a computerized documentation system.     

Non-Hodgkin lymphoma of the central skull base: MR manifestations

OBJECTIVE: The aim of this study was to demonstrate the MR characteristics of non-Hodgkin lymphoma of the skull base to help in the differential diagnosis of this neoplasm from other conditions. MATERIALS AND METHODS: MR of five patients, 7-64 years old, with pathologically proved lymphomas of the skull base were reviewed. Three cases had primary skull base lesions involving the sphenoid bone and the cavernous sinus. One case with a nasal cavity lesion involving the skull base and one with a relapsing skull base lesion of previously treated tonsillar lymphoma were included. RESULTS: The lesions had signal intensities that were similar to that of gray matter of brain on both T1- and T2-weighted imaging. Bilateral cavernous sinuses were involved with encasement of internal carotid arteries in every case. Postcontrast MR showed homogeneous enhancement of the tumor with dural infiltration along the planum sphenoidale, clivus, or tentorium. The clivus was destroyed or replaced by tumors in adult cases but in two children the clivus was preserved with intact sphenooccipital synchondrosis. In one case the tumor extended to the extracranial portion through the jugular foramen. CONCLUSION: The MR findings of a permeative lesion of the skull base, invasion of the cavernous sinus without arterial narrowing, infiltration along the dural surface, and an iso- or hypointensity with brain on T2-weighted imaging should suggest lymphoma.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

Regional differences in triacylglycerol synthesis in adipose tissue and in cultured preadipocytes

The initial suspicion that obesity increases coronary risk has been much sharpened with the demonstration that risk is more tightly linked to abdominal than to peripheral obesity, and tighter yet again when the mass of omental adipose tissue is taken into account. These data suggest that important metabolic differences might exist between adipocytes from different regions, and indeed, it has long been appreciated that triacylglycerol hydrolysis can be stimulated to a greater extent in omental than in subcutaneous adipocytes. The present study focuses on triacylglycerol synthesis in human subcutaneous and omental adipocytes, a process which, by contrast, has received relatively little attention. Experiments were done on adipose tissue removed at laparotomy and on cultured preadipocytes. With the former, triacylglycerol synthesis was measured in the presence and absence of oleate added to the medium using radiolabeled glucose and oleate as tracers. The results demonstrate that under all conditions examined triacylglycerol synthesis in subcutaneous adipose tissue exceeded that in deep omental adipose tissue. To study the cells in more detail, preadipocytes were cultured and triacylglycerol synthesis was examined again under basal conditions and with stimulation with insulin and acylation stimulating protein (ASP). Under basal conditions, particularly when oleate was added to the medium, clear differences were present such that triacylglycerol synthesis was substantially greater in subcutaneous preadipocytes than in omentally derived preadipocytes. These differences were more pronounced when the cells were stimulated with either insulin or acylation stimulating protein. Overall, triacylglycerol synthetic capacity in subcutaneous tissue exceeded that in omental tissue. As a consequence, omental tissue as compared to subcutaneous adipose tissue would have a limited capacity to prevent fatty acids from reaching the liver and stimulating hepatic lipoprotein synthesis.