图形点阵式液晶显示器MSP-G320240在高速处理器DSP中的应用

介绍了内置SD1335控制器的图形液晶显示器MSP-G320240的工作原理及应用方法，给出了MSP-G320240液晶显示器同DSP的简单接口电路，同时给出了相应的液晶显示器的初始化和清显示区的具体程序。     

机械-射流破岩耦合特性研究

在现代旋转钻井破碎井底岩石中仍是以机械破岩为主，理论与实践证明，射流辅助破岩是提高钻井破岩效率的重要途径，但它们的耦合特性研究极少。文章基于渗流场与应力场的耦合理论分析，进行了机械与射流破岩耦合特性的实验研究。结果表明：射流压力和水楔作用对岩石渗流场、应力场具有重要作用，耦合作用比非耦合作用的破岩效率有较大幅度的提高。在实验条件下，砂岩的耦合作用提高破岩效率40％左右，灰岩的耦合作用提高破岩效率20％左右。     

钻机柴油机的动向和190系列柴油机的发展

本文概括介绍了国内外钻机柴油机发展的水平及动向,比较了国内钻机柴油机与国外钻机柴油机在发展上的差距。重点介绍了作为国产钻机主要动力的190系列柴油机的发展状况及最新技术在该机型上的应用。     

Simulations of the mobile phase of polyethylene

Results are presented from atomistic molecular dynamics simulations of the mobile pseudo-hexagonal phase of polyethylene, which occurs under conditions of elevated pressure and temperature. Three different types of model are considered, all of which employ periodic boundary conditions. The first model consists of n-alkane sequences (48×-C₂₄H₄₈-) that are bonded across the simulation box boundaries to produce chains that are effectively infinite in extent. On heating, at high pressure, this system displays a rotator phase, in which the chains retain an all-trans conformation, and rotate as semi-rigid units. A second model, consisting of finite n-alkanes (48×C₂₄H₅₀) displays the same behaviour at low temperatures, but at high temperature and pressure forms a conformationally disordered rotator phase, characterised by a large proportion of gauche defects and a significant lattice expansion. The final model considered contains long n-alkanes (24×C₁₀₂H₂₀₆) which contain jog defects and each pass twice through the simulation box. This model forms a conformationally disordered rotator phase at high temperature and ambient pressure. The behaviour of the three models, in terms of the variations in chain conformation and rotational and translational dynamics, are compared. The conformationally disordered phases provide useful representations of the experimentally observed mobile phase.     

Effects of manufacturing defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates

The effects of defects on the mechanical properties of carbon fibre reinforced polyethersulphone laminates have been measured. The defects studied were cut fibre plies, omission of polymer films and local delamination produced by the inclusion of foreign matter. Of these it was found that only cut plies had a significant detrimental effect on the strength of a laminate. For specimens with two cut plies, the failure stress, tensile, flexural and compressive in the remaining continuous plies was the same as in the defect-free material, provided that the cut plies were widely separated. However the failure stresses were 15–18% lower in the continuous plies in the specimens containing two cut plies which were more closely spaced and in specimens containing four cut plies.     

Treatment of peritonitis complicated by multiple organ insufficiency

Comparison evaluation of the methods of treatment was based on the analysis of the results of management of 347 patients with general purulent decompensated peritonitis with polyorganic insufficiency. The efficacy of closed drainage in 98 patients, continuous flow irrigation (dialysis) in 126, stage programmed irrigation and inspection of the abdominal cavity in 99, and open drainage in 24 patients was compared. The causes of peritonitis were: complications after acute surgical diseases (in 156 cases), in planned operations (59), and in obstetrical and gynecological diseases (132). Most of the patients were brought to the clinic from other hospitals because of unsuccessful treatment of peritonitis and absence of means for performing hemodialysis and management of polyorganic insufficiency. The incidence of the last-named reached 71.0 to 91.0% in the different groups of patients. In monotypic complex treatment, stage programmed irrigation was marked by a much lesser number of abscesses and other complications and a lower mortality (20.2%) as compared to flow irrigation (30.0%, closed drainage (27.5%), and open (laparostomy) treatment (37.5%). Despite the very serious contingent of patients, total mortality (27.0%) in the application of the indicated methods was quite low.