Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

46,XX/69,XXX diploid-triploid mixoploidy with hypothyroidism and precocious puberty

We report a 20 month old female patient with diploid-triploid mixoploidy (46,XX/69,XXX) syndrome with hypothyroidism and precocious puberty. The triploid cell line was only expressed in the fibroblast culture and comprised the majority (95%) of the cells. Chromosome analysis of the fetal blood sample and peripheral blood sample were normal. The patient shows typical features of full triploidy (growth and severe mental retardation, cranial and facial dysmorphism, complete syndactyly of fingers 3/4, partial syndactyly of toes 2/3) and facial but no body asymmetry. At the age of 5 months central hypothyroidism and precocious puberty were diagnosed. Thin pigmented streaks were visible on the wrists and legs of the patient at the age of 16 months. This is the first patient reported so far with 46,XX/69,XXX mixoploidy suffering from hypothyroidism and precocious puberty.     

The murine immune response to the male-specific antigen mouse testicular cytochrome c

Male and female A/J mice were examined for their ability to elicit T lymphocyte and antibody (Ab) responses to the male-specific Ag, mouse testicular cytochrome c (Mt cyt). T lymphocytes from both male and female mice primed in vivo responded to the Ag in in vitro proliferation assays, and the dose-response curves were statistically indistinguishable. In addition, similar levels of Ab to Mt cyt were observed in immunized male and female mice. The B cells producing the Ab had switched isotypes to IgG1 and IgG2a, indicating that the self-reactive T helper (Th) cells in male mice were functional. Thus, male mice do not appear to be immunologically tolerant to Mt cyt, at least at the Th and B lymphocyte levels. No evidence for disease was found in male mice primed with Mt cyt. Major histocompatibility complex (MHC) class II-positive antigen-presenting cells are present in the testes and these were shown in vitro to process and present Mt cyt to a T cell hybridoma specific for the synthetic peptide Mt cyt 93-104. However, the hybridoma was not activated in the absence of exogenous Mt cyt 93-104 or Mt cyt, indicating that endogenous Mt cyt is not normally processed in sufficient quantity to effectively load MHC class II molecules with this particular Mt cyt-derived peptide. Notwithstanding any immunologic privilege of the testes, the lack of tolerance to Mt cyt and its failure to elicit an autoimmune disease could extend from the low levels of processed Mt cyt Ag available for T cell recognition. The T cell response elicited by Mt cyt contrasts the lack of response to mouse somatic cytochrome c which differs from Mt cyt at 13 amino acid residues and is expressed in most tissues and at higher levels.     

Polymorphonuclear neutrophil granulocyte chemotactic hyperresponsiveness in a case of canine acromegaly

Growth hormone (GH) has recently been shown to affect polymorphonuclear neutrophil granulocyte (PMN) function and to be secreted by mononuclear cells, indicating that the hormone may be active in an immunophysiologic network, acting as an endo- or paracrine priming agent. The purpose of the present study was to evaluate the chemotactic responsiveness of canine peripheral PMN in a dog with acromegaly, caused by spontaneous, progesterone-induced hypersecretion of GH and, secondary to this, a seven-fold increase in insulin-like growth factor I (IGF-I). The chemotactic responsiveness towards zymosan-activated serum (ZAS) and leukotriene B4 (LTB4) was evaluated at a time when the dog suffered from acromegaly and again 57 days after corrective surgery (ovariohysterectomy). The experiments showed that PMN from the patient exhibited enhanced chemotactic migration that appeared to be associated with the hypersomatotropic condition as judged from the reversibility of the phenomenon. The glucose intolerance and elevated serum alkaline phosphatase that were observed in the acromegalic dog were also shown to be reversible following surgery.     

Using Web resources to construct multilingual medical thesaurus for cross-language medical information retrieval

Due to the language barrier, non-English users are unable to retrieve the most updated medical information from the U.S. authoritative medical websites, such as PubMed and MedlinePlus. However, currently, there is no any cross-language medical information retrieval (CLMIR) system that can help Chinese-speaking consumers cross the language barrier in finding useful English medical information. A few CLMIR systems utilize MeSH (Medical Subject Headings) to help overcome the language barrier. Unfortunately, the traditional Chinese version of MeSH is currently unavailable.In this paper, we employ a semi-automatic term translation method to construct a Chinese–English MeSH by exploiting abundant multilingual Web resources, including Web anchor texts and search–result pages. Through this method, we have developed a Chinese–English Mesh Compilation System to assist knowledge engineers in compiling a Chinese–English medical thesaurus with more than 19,000 entries. Furthermore, this thesaurus has been used to develop a prototypical system for cross-language medical information retrieval, MMODE, which can help consumers retrieve top-quality English medical information using Chinese terms.