Review of electrospun hydrogel nanofiber system: Synthesis,Properties and Applications

Hydrogel-based nanofibers or vice versa are a relatively new class of nanomaterials, in which hydrogels are structured in nanofibrous form. Structure and size of the material directly governs its functionality, therefore, in hydrogel science, the nanofibrous form of hydrogels enables its usage in targeted applications. Hydrogel nanofiber system combines the desirable properties of both hydrogel and nanofiber like flexibility, soft consistency, elasticity, and biocompatibility due to high water content, large surface area to volume ratio, low density, small pore size and interconnected pores, high stiffness, tensile strength, and surface functionality. Swelling behavior is a critical property of hydrogels that is significantly increased in hydrogel nanofibers due to their small size. Electrospinning is the most popular method to fabricate “hydrogel nanofibers,” while other processes like self-assembly, solution blowing and template synthesis also exist. Merging the characteristics of both hydrogels and nanofibers in one system allows applications in drug delivery, tissue engineering, actuation, wound dressing, photoluminescence, light-addressable potentiometric sensor (LAPS), waterproof breathable membranes, and enzymatic immobilization. Treatment of wastewater, detection, and adsorption of metal ions are also emerging applications. In this review paper, we intend to summarize in detail about electrospun “hydrogel nanofiber” in relation to its synthesis, properties, and applications.     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Effect of Temperature on Reliability Issues of Ferroelectric Dopant Segregated Schottky Barrier Tunnel Field Effect Transistor (Fe DS-SBTFET)

This paper addresses reliability issues associated with temperature of Ferroelectric Dopant Segregated Schottky Barrier Tunnel Field Effect Transistor (Fe DS-SBTFET). The simulated results are compared with Dopant Segregated Schottky Barrier TFET (DS-SBTFET). This is achieved by varying the operating temperature from 300 to 500 K. DC parameters such as I_ON/I_OFF ratio, drain current characteristics and subthreshold swing (SS) for a range of temperature have been highlighted. Moreover, the influence of temperature on various RF figure of merits such as gate capacitance (C_GG), intrinsic delay, cutoff frequency (f_T) etc. have been investigated. The device linearity has been analyzed by considering the effect of temperature variation on linearity parameters like g_m2, g_m3, 1-dB compression point, VIP₂, VIP₃ and IIP₃. The device characteristics get upgraded by the increase in cut-off frequency and reduction in intrinsic delay at elevated temperature.

     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

Study of the effect of BDMA catalyst in the epoxy novolac curing process by isothermal DSC

Epoxy novolac/anhydride cure kinetics has been studied by differential scanning calorimetry under isothermal conditions. The system used in this study was an epoxy novolac resin (DEN431), with nadic methyl anhydride as hardener and benzyldimethylamine as accelerator. Kinetic parameters including the reaction order, activation energy and kinetic rate constants, were investigated. The cure reaction was described with the catalyst concentration, and a normalized kinetic model developed for it. It is shown that the cure reaction is dependent on the cure temperature and catalyst concentration, and that it proceeds through an autocatalytic kinetic mechanism. The curing kinetic constants and the cure activation energies were obtained using the Arrhenius kinetic model. A suggested kinetic model with a diffusion term was successfully used to describe and predict the cure kinetics of epoxy novolac resin compositions as a function of the catalyst content and temperature. Copyright © 2003 Society of Chemical Industry     

Continuous-wave quantum yields of various cobalamins are influenced by competition between geminate recombination and cage escape

Quantum yields of photolysis of the cobalt-carbon bond for three cobalamin compounds were measured with a continuous-wave laser at 442 nm under both aerobic and anaerobic conditions. Aerobically, the initial homolysis product, Co(II) cobalamin, is trapped by oxygen to form aquocobalamin. Use of an excess of the radical trapping reagent 2,2,6,6-tetramethyl-1-piperidinyloxyl, under anaerobic conditions, scavenges the carbon radical and allows detection of the cobalt(II) photoproduct. Quantum yields measured under anaerobic conditions for 5'-deoxyadenosylcobalamin (phi (Co-C alpha),442 = 0.20 +/- 0.03) and methylcobalamin (phi (Co-C alpha),442 = 0.35 +/- 0.03) are in agreement with the values obtained under aerobic conditions (phi (Co-C alpha),442 = 0.19 +/- 0.04 and phi (Co-C alpha),442 = 0.36 +/- 0.04, respectively). Additionally, the quantum yield values for 5'-deoxyadenosylcobalamin and its base-off derivative (phi (Co-C alpha),442 = 0.045 +/- 0.015) match those obtained on a nanosecond time scale [Chen, E., & Chance, M. R. (1990) J. Biol. Chem. 256, 12987-12994]. A comparison of quantum yields obtained anaerobically for 5'-deoxyadenosylcobalamin and methylcobalamin in H2O versus ethylene glycol shows a 4-fold decrease for the former cobalamin and no change for the latter. These quantum yields are evaluated in terms of time-independent radical separation distances.     

Spontaneous rise of fetal platelet counts despite increasing anti-HPA-5b antibodies

A 47-year-old woman with seronegative polyarthritis, diarrhea, and photosensitivity dermatitis was found to have Crohn's disease and pellagra. The presence of high values of 5-hydroxyindolacetic acid in the urine began the exhaustive investigations and finally enterotomy. No mass lesion was found. Argyrophilic cells were not increased in areas of inflamed intestinal mucosa or the normal mucosa. The disagreement between biochemical and histologic findings was attributed to sampling error. Antiinflammatory treatment for Crohn's disease was given and the gastrointestinal and articular symptoms improved, excretion of 5-hydroxyindolacetic acid returned to normal and there was no relapse of pellagra. Pellagra as a complication of Crohn's disease has been described in 4 cases; malnutrition and intestinal malabsorption were the proposed mechanisms for the niacin deficiency and pellagra of those patients. In the current case, the pathogenesis of pellagra may be accounted to wastage of tryptophan by an increased pool of intestinal argyrophilic cells, suggested by increased urinary excretion of 5-hydroxyindolacetic acid.