On the deformation of circular cylindrical rubber bars under axial thrust

Summary The axisymmetric bulging of circular cylindrical rubber bars under end thrust is investigated. The results for different forms of the strain energy function are compared with experimental results.With 2 Figures     

The difficultly extractable lipides of cottonseed meats,their composition and effect on the refining characteristics of the crude oils

Summary and Conclusions Crude lipides fractions were produced from raw, tempered, and cooked meats from two lots of cottonseed by a series of successive stepwise extractions, designed to obtain fractional portions of the total lipides in the order of the difficulty of their extraction. The proximate composition of the crude lipides fractions was determined. It was found that the composition of successive lipides fractions varied with the degree of exhaustiveness of extraction. The fractions obtained by more exhaustive extraction contained greater amounts of undesirable non-neutral oil material and lesser amounts of desirable neutral oil. It was also established that the method used in preparing meats for extraction was of paramount importance in its effect on the composition of the crude lipides obtained. The crude lipides fractions from raw and tempered meats contained large amounts of impurities while the crude lipides fractions similarly obtained from cooked meats were relatively low in impurities. Crude oils equivalent to varying degrees of total lipides extraction were reconstituted from the crude lipides fractions and evaluated for refining characteristics. The impurities content of the reconstituted oils varied as the degree of total lipides extraction and increases in the impurities content of the oils were generally reflected in disproportionate increases in refining losses and/or refined oil color. The oils obtained from the cooked meats at all degrees of extraction were outstandingly low in refining losses as compared to the oils from the raw and the tempered meats. Presented in two parts at the spring meeting, American Oil Chemists’ Society, New Orleans. La., Apr. 18–20, 1955, and at the fall meeting, Philadelphia, Pa., Oct. 10–12, 1995. One of the laboratories of the Southern Utilization Research Branch, Agricultural Research Service, U. S. Department of Agriculture.     

Cleaved and etched facet nitride laser diodes

Room-temperature (RT) pulsed operation of blue (420 nm) nitride-based multiquantum-well laser diodes grown on a-plane and c-plane sapphire substrates has been demonstrated. Structures investigated include etched and cleaved facets as well as doped and undoped quantum wells. A combination of atmospheric and low-pressure metal organic chemical vapor deposition using a modified two-flow horizontal reactor was employed. Threshold current densities as low as 12.6 kA/cm² were observed for 10×1200 μm lasers with uncoated reactive ion etched facets on c-plane sapphire. Cleaved facet lasers were also demonstrated with similar performance on a-plane sapphire. Laser diodes tested under pulsed conditions operated up to 6 h at RT. Lasing was achieved up to 95°C and up to a 150-ns pulselength (RT). Threshold current increased with temperature with a characteristic temperature T₀ of 114 K     

Monolithic AGC loop for a 160 Mb/s transimpedance amplifier

A new BiCMOS monolithic automatic gain control (AGC) amplifier with wide dynamic range is described. The forward gain path has 120 kΩ transimpedance, 140 MHz bandwidth, input noise current spectral density of 1.17 pA/√Hz and input signal current handling capability of 4 mA. An on-chip peak detector incorporating a 25 pA current source yields AGC hold times in the millisecond range     

检查光纤束的LED闪光器

借助图1所示电路,你可以验证光纤束,特别是当链路通过几块插接板时.你能在远端看见它使用的两只高亮度LED.闪光器在大约50分钟后关闭,在关断状态时的功耗微乎其微.电路工作于距离超过1 km的多模光纤上.它还可配合单模光纤,但较难在接收端看到.如果光纤很短,由于LED很亮,因此最好在远端以小角度查看.IC1B是运行频率约5 Hz的施密特触发振荡器,驱动IC2,后者是4020二进制触发器.IC3A是控制双稳态多谐振荡器.按动按钮开关S1,则设置双稳态多谐振荡器,后者启动振荡器,并启用4020,以便开始从它的全零状态起计数.它还启用门电路IC1A和IC1D,二者控制PNP LED驱动晶体管.     

Synthesis and characterization of monodisperse uniformly shaped respirable aerosols

The top‐down, micromolding technique, referred to as Particle Replication in Nonwetting Templates (PRINT^®), affords a new opportunity for the generation of inhalation therapeutics. Powders were fabricated with predetermined particle size and shape; when dispersed with a collision jet nebulizer, these particles resulted in monodisperse aerosols with geometric standard deviations well below 1.2. Dynamic shape factors for this novel set of uniformly shaped particles were determined by correcting the drag of nonspherical particles in the ultra‐Stokesian flow conditions of the aerodynamic particle sizer (APS). This convenient approach for shape factor determination agreed well with current literature approaches and allowed for the correction of APS results for particles with known volumes. Determined shape factor values of PRINT geometries were used to estimate the theoretical median aerodynamic diameters of individual aerosols, which were then compared to actual inhalation powders. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3184–3194, 2013     

Experimental validation of polyhedral discrete element model

The flow of polyhedral granular particles in a small 3D slice hopper is studied experimentally and computationally by applying the discrete element method (DEM). A high speed camera was used to obtain the experimental results. The experimental packing structure, flow behaviour, arching and discharging in the hopper are analysed and compared with the DEM results for three hopper half angles. Reasonable agreement is shown on the static packing, flow behaviour and hopper discharge rates. The critical orifice length at which flow ceases to be smooth is investigated and arching of the material around the orifice is demonstrated experimentally and computationally. Spherical particles of nearly identical volume and density to the average of the polyhedral particles are also tested and compared to the polyhedra. The DEM is shown to be reasonably adept at modelling the interactions between polyhedral particles in a system in which there are very many possible particle geometrical interactions. Further work should consider the cohesion between the particles and the particle and the wall. Simulations of a greater number of particles in different hopper geometries should also be explored.     

Thermo-physical properties of as deposited and aged thermal barrier coatings (TBC) for gas turbines: State-of-the art and advanced TBCs

In the perspective of fuelling the future generations of gas turbines by hydrogen rich syngas, the evaluation of the effect of a higher water vapour content into the flue gases on the TBC used, or potentially usable, is a need. For this purpose YPSZ APS TBC with two different microstructures have been exposed for 500?h at different temperatures in the range 1000?°C–1250?°C either in air and air +20% vol. H₂O. The comparison between the different testing conditions has been performed in terms of sintering kinetics and phase stability, as evaluated by thermal diffusivity measurements and Synchrotron X-Rays diffraction, respectively. Furthermore the characterisation of thermal properties of two innovative TBCs (GZO-YPSZ and YAG) potentially able to withstand the CMAS attack and erosive environments, respectively, has been carried out.No clear evidence of a different behaviour of TBC has been observed, at least in the considered aging time and temperature range.     

Hybrid Photopatterned Enzymatic Reaction (HyPER) for in Situ Cell Manipulation

The ability to design artificial extracellular matrices as cell‐instructive scaffolds has opened the door to technologies capable of studying the fate of cells in vitro and to guiding tissue repair in vivo. One main component of the design of artificial extracellular matrices is the incorporation of biochemical cues to guide cell phenotype and multicellular organization. The extracellular matrix (ECM) is composed of a heterogeneous mixture of proteins that present a variety of spatially discrete signals to residing cell populations. In contrast, most engineered ECMs do not mimic this heterogeneity. In recent years, photo‐deprotection has been used to spatially immobilize signals. However, this approach has been limited mostly to small peptides. Here we combine photo‐deprotection with enzymatic reaction to achieve spatially controlled immobilization of active bioactive signals that range from small molecules to large proteins. A peptide substrate for transglutaminase factor XIII (FXIIIa) was caged with a photo‐deprotectable group, which was then immobilized to the bulk of a cell‐compatible hydrogel. With focused light, the substrate can be deprotected and used to immobilize patterned bioactive signals. This approach offers an innovative strategy to immobilize delicate bioactive signals, such as growth factors, without loss of activity and enables in situ cell manipulation of encapsulated cells.     

Relationships between processing conditions and rheological behavior of polyethylenes

The rheological properties of high‐density polyethylene melts were found to change drastically after treatment with oxygen or peroxide. Unusual features of the treated melts in shear flow (190°C) included (a) increase in length of time to reach steady state values of shear stress in start‐up experiments; (b) a non‐reproducibility of the low‐shear rate sections of the flow curves measured at increasing and decreasing shear rate; (c) an increase of viscosity at low shear rates compared to the neat sample. Under non‐stationary extensional flow (a regime of constant force) the treatment leads to a change in shape of the strain development with time, an increase of the apparent elongational viscosity, and an increase in time to break. At 150–170°C, the rheological behavior of the treated polyethylenes is completely identical to the corresponding behavior of the untreated. These results, together with data from IR‐spectroscopy and GPC suggest the following mechanism: The oxidation or peroxidation leads to reactive sites in the polymer chain that incorporate a few long branches during the initial contact with oxygen or peroxide. These reactive sites remain in the polymer after cooling/solidification and can become activated again upon heating to 190°C causing additional changes in molecular structure. Formation of the long‐chain branches results in an increased resistance of the melt to extensional deformation, and an improvement in processing behavior, as well as the quality of bottles produced by the blow‐molding process. Polym. Eng. Sci. 44:615–624, 2004. © 2004 Society of Plastics Engineers.