NUMERICAL SIMULATIONS OF DUCTILE MACHINING OF SILICON NITRIDE WITH A CUTTING TOOL OF DEFINED GEOMETRY

Recent experiments involving machining of silicon nitride at the micrometer scale has shown that silicon nitride behaves in a ductile fashion under high pressures and when the depth of cut is small. In this paper, a preliminary study of ductile machining of Silicon Nitride (Si₃N₄) using numerical simulations is reported. The commercial software package ADVANTEDGE is used to model the cutting process. The numerical simulations involve a parametric study carried out to understand the effects of cutting speed, feed, rake angle and tooltip radius to evaluate conditions that are conducive to brittle-to-ductile phase transition. The feed, tooltip radius and depth of cut are of the order of tens of micrometers and the cutting speeds range from 0.5 m/min to 300 m/min. The results indicate that machining of silicon nitride may be carried out in a ductile fashion for small tooltip radii, high negative rake angles and small depths of cut.     

Environmental and pharmacological factors in the development of noncontingent tolerance to cocaine in pigeons.

Previous research with rats and monkeys has shown that tolerance to behavioral effects of cocaine developed if the drug was administered before behavioral test sessions but not if it was administered after sessions, a finding known as contingent tolerance. In contrast, a recent experiment using pigeons found that they showed tolerance resulting from postsession drug administration (noncontingent tolerance). The 4 experiments reported in this article were conducted to examine that result more fully. Experiment 1 found that immediate presession administration of cocaine to pigeons reliably led to tolerance to effects on food-reinforced operant key pecking and that immediate postsession administration of cocaine also led to tolerance in half the subjects, those whose key pecking was not suppressed by postsession dosing. Experiment 2 showed that eating in the home cage under the effects of postsession cocaine was not necessary for tolerance to develop to effects of postsession cocaine and that the majority of subjects developed tolerance from postsession cocaine administration. Experiment 3 found that mere drug exposure in the home cage without exposure to an experimental session did not reliably produce tolerance during the behavioral session. Experiment 4 showed that tolerance from postsession cocaine administration could be observed even when daily dosing was discontinued during dose–response curve assessment. Therefore, the combined results showed that pigeons often developed tolerance to effects of cocaine during the behavioral session when cocaine was administered postsession and that this tolerance was not the result of feeding under effects of the drug. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modelling and simulation of high-speed machining

A Lagrangian finite element model of orthogonal high-speed machining is developed. Continuous remeshing and adaptive meshing are the principal tools which we employ for sidestepping the difficulties associated with deformation-induced element distortion, and for resolving fine-scale features in the solution. The model accounts for dynamic effects, heat conduction, mesh-on-mesh contact with friction, and full thermo-mechanical coupling. In addition, a fracture model has been implemented which allows for arbitrary crack initiation and propagation in the regime of shear localized chips. The model correctly exhibits the observed transition from continuous to segmented chips with increasing tool speed.     

Limitations to the generality of cocaine locomotor sensitization.

Repeated exposure to cocaine often leads to tolerance to effects on operant behavior, whereas sensitization often develops to effects on locomotor activity. The purpose of the present set of experiments was to examine if locomotor sensitization to cocaine would develop in the presence or absence of an operant contingency in rats. In Experiment 1, rats lever pressed on an FR schedule of reinforcement, and were administered chronic cocaine. Tolerance to effects of cocaine on lever pressing developed in most subjects. No subjects developed locomotor sensitization even when the operant contingency was removed. Experiment 2 examined effects of chronic cocaine administration in rats with no exposure to an operant contingency. Tolerance developed to locomotor effects of cocaine in some subjects, but none developed sensitization. In Experiment 3, rats were exposed to a shorter drug regimen, and given time off before a sensitization-test session. Some, but not all subjects showed locomotor sensitization during the test session. The present results, therefore, show that locomotor sensitization to cocaine is not an inevitable consequence of repeated exposure to the drug. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The serial process in visual search.

The conditions for serial search are described. A multiple target search methodology (Thornton & Gilden, 2007) is used to home in on the simplest target/distractor contrast that effectively mandates a serial scheduling of attentional resources. It is found that serial search is required when (a) targets and distractors are mirror twins, and (b) when the search elements lack the Gestalt property of intrinsic orientation. The finding is put into the context of Feature Integration Theory (Treisman & Gelade, 1980) that first identified the occasions of serial search to be important to object perception and understanding. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An enhanced constitutive material model for machining of Ti–6Al–4V alloy

Material failure due to adiabatic shear banding is a characteristic feature of chip formation in machining of Ti–6Al–4V material. In this paper, an enhanced Zerilli–Armstrong (Z-A) based material flow stress model is developed by accounting for the effects of material failure mechanisms such as voids and micro-cracks on the material flow strength during shear band formation. These effects are captured via a multiplicative failure function in the constitutive material flow stress model. The strain and strain rate dependence of the material failure mechanism are explicitly modeled via the failure function. The five unknown constants of the failure function are calibrated using cutting force data and the entire model is verified using separate force, chip segmentation frequency and tool–chip contact length data from orthogonal cutting experiments reported by 0035 and 0040. Model predictions of these quantities based on the enhanced material model are shown to be in good agreement with experiments over a wide range of cutting conditions.     

Engineering trimeric fibrous proteins based on bacteriophage T4 adhesins

The adsorption specificity of bacteriophage T4 is determined by genes 12 and 37, encoding the short tail-fibers (STF) and the distal part of the long tail-fibers (LTF), respectively. Both are trimeric proteins with rod domains made up of similar tandem quasi-repeats, approximately 40 amino acids long. Their assembly requires the viral chaperones gp57A and gp38. Here we report that fusing fragments of gp12 and gp37 to another trimeric T4 fibrous protein, fibritin, facilitates correct assembly, thereby by-passing the chaperone requirement. Fibritin is an alpha-helical coiled coil protein whose C-terminal part (fibritin E, comprising the last 120 residues) has recently been solved to atomic resolution. Gp12 fragments of 109 and 70 amino acids, corresponding to three and two quasi-repeats respectively, were fused to the C-terminus of fibritin E. A similar chimera was designed for the last 63 residues of gp37, which contain four copies of the pentapeptide Gly-X-His-X-His and assume a narrow rigid structure in the LTF distal tip. Expressed from plasmids, all three chimeras form soluble trimers that are resistant to dissociation by SDS and digestion by trypsin, indicative of correct folding and oligomerization.      

Fatty Acids-Enriched Fractions of Hermetia illucens (Black Soldier Fly) Larvae Fat Can Combat MDR Pathogenic Fish Bacteria Aeromonas spp.

Aeromonas spp. cause many diseases in aquaculture habitats. Hermetia illucens (Hi) larvae were used as feed-in aquacultures and in eradicating pathogenic fish bacteria. In the present study, we applied consecutive extractions of the same biomass of BSFL fat using the acidic water–methanol solution. The major constituents of the sequential extracts (SEs) were free fatty acids (FFAs), and fatty acids derivatives as identified by gas chromatography spectrometry (GC-MS). Our improved procedure enabled gradual enrichment in the unsaturated fatty acids (USFAs) content in our SEs. The present study aimed to compare the composition and antimicrobial properties of SEs. Among actual fish pathogens, A. hydrophila and A. salmonicida demonstrated multiple drug resistance (MDR) against different recommended standard antibiotics: A. salmonicida was resistant to six, while A. hydrophila was resistant to four antibiotics from ten used in the present study. For the first time, we demonstrated the high dose-dependent antibacterial activity of each SE against Aeromonas spp., especially MDR A. salmonicida. The bacteriostatic and bactericidal (MIC/MBC) activity of SEs was significantly enhanced through the sequential extractions. The third sequential extract (AWME3) possessed the highest activity against Aeromonas spp.: inhibition zone diameters were in the range (21.47 ± 0.14–20.83 ± 0.22 mm) at a concentration of 40 mg/mL, MIC values ranged between 0.09 and 0.38 mg/mL for A. hydrophila and A. salmonicida, respectively. AWME3 MBC values recorded 0.19 and 0.38 mg/mL, while MIC₅₀ values were 0.065 ± 0.004 and 0.22 ± 0.005 mg/mL against A. hydrophila and A. salmonicida, respectively. Thus, the larvae fat from Hermitia illucens may serve as an excellent reservoir of bioactive molecules with good capacity to eradicate the multidrug-resistant bacteria, having promising potential for practical application in the aquaculture field.     

A multivariate assessment of individual differences in sensation seeking and impulsivity as predictors of amphetamine self-administration and prefrontal dopamine function in rats.

Drug abuse vulnerability has been linked to sensation seeking (behaviors likely to produce rewards) and impulsivity (behaviors occurring without foresight). Since previous preclinical work has been limited primarily to using single tasks as predictor variables, the present study determined if measuring multiple tasks of sensation seeking and impulsivity would be useful in predicting amphetamine self-administration in rats. Multiple tasks were also used as predictor variables of dopamine transporter function in the medial prefrontal and orbitofrontal cortexes, as these neural systems have been implicated in sensation seeking and impulsivity. Rats were tested on six behavioral tasks as predictor variables to evaluate sensation seeking (locomotor activity, novelty place preference, and sucrose reinforcement on a progressive ratio schedule) and impulsivity (delay discounting, cued go/no-go, and passive avoidance), followed by d-amphetamine self-administration (0.0056–0.1 mg/kg infusion) and kinetic analysis of dopamine transporter function as outcome variables. The combination of these predictor variables into a multivariate approach failed to yield any clear relationship among predictor and outcome measures. Using multivariate approaches to understand the relation between individual predictor and outcome variables in preclinical models may be hindered by alterations in behavior due to training and thus, the relation between various individual differences in behavior and drug self-administration may be better assessed using a univariate approach in which a only a single task is used as the predictor variable. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Contraction of time in attention-deficit hyperactivity disorder.

Attention-deficit hyperactivity disorder (ADHD) has been associated with anomalies in dopamine systems. Recent advances in the understanding of the core cognitive deficits in ADHD suggest that dopamine dysfunction might be expressed through shortened time scales in reward-based learning. Here this perspective is extended by the conjecture that temporal span in working memory systems might generally be shortened. As a test of this conjecture the authors focus on the implicit memory system involved in rhythmic movement, assessing the minimum tempo at which rhythmic feeling can be sustained in adults with diagnosed ADHD and in a control group of normal adults. The authors found that people with ADHD do in fact have a rhythm cut-off that is faster in tempo than those without ADHD. This finding is consistent with the idea that impaired dopamine dynamics have systemic consequences for cognitive function, essentially recalibrating the clock that sets the time scale for the subjective experience of temporal events. (PsycINFO Database Record (c) 2010 APA, all rights reserved)