Effect of catalysts on the reaction between a cycloaliphatic diisocyanate (H-MDI) and n-butanol

Kinetics of the reaction between bis(4-isocyanatocyclohexyl)methane, H-MDI, and n-butanol was studied in toluene at 100°C. Effects of various catalysts, such as Hg(CH₃COO)₂, Zn(CH₃COO)₂ · 2H₂O, SnCl₄ · 5H₂O, and dibutyltindilaurate on the reaction rate and kinetics were also investigated. Reactions were followed by determining the unreacted isocyanate as a function of reaction time, using the standard dibutylamine back titration method. All catalysts seem to be very effective in increasing of the rate of the reaction compared to the uncatalyzed system. Depending on the initial stoichiometric ratio of (NCO) and (OH) and the concentration of the catalyst used, it seems possible to have preferential catalysis of the primary reaction between (NCO) and (OH) over the side reactions.     

Microbeam RBS on flat panel displays

We have demonstrated the utility of microbeam-Rutherford BackScattering (μ-RBS) in spatially resolved studies of operational plasma effects on the interior surfaces of plasma flat panel displays manufactured by Photonics Imaging. The experiments were performed at the Sandia Nuclear microprobe using a 2.8 MeV He beam with an average beam spot size of less than 8 μm. The interior surface of the top panes of the flat panels is composed of approximately 800 nm of MgO on top of a 2000 nm thick PbO layer. μ-RBS of sample panels operated under varying conditions measured changes in the surface MgO film thickness due to plasma erosion and redeposition as accurately as ± 1.5 nm. The high accuracy in the MgO thickness measurement was achieved by inferring the MgO thickness from the shift of the Pb front edge in the RBS spectrum. An estimate for the thickness accuracy as a function of the acquired statistics is presented. The surface of the flat panels' bottom panes is also comprised of MgO on top of PbO. However, troughs 100 μm wide by 10 μm deep were partially filled with phosphor and cover the entire width of the surface. This leaves only 100 μm long sections of MgO within the trough exposed. Using μ-RBS, we were able to analyze the surface composition of these regions.     

Scaled model measurements of embedding impedances for SIS waveguide mixers

Several scaled models have been used to determine the contributions of various waveguide mount parameters to the embedding impedance of a mm-wave SIS mixer. Measured effects of waveguide height, substrate orientation and width, junction location, lead inductance and RF-filter impedance are presented and discussed.     

A novel system for mammary epithelial cell culture

A method is described for the isolation and density gradient enrichment of mammary epithelial fragments from pregnant, nonlactating bovine tissue. Immunocytochemical analysis prior to and following culture revealed specific staining with antibodies to keratin, indicating that these cells are epithelial in nature. Fragments enriched for epithelium could be stored in liquid nitrogen for extended periods prior to culture. When cast within a three-dimensional matrix of collagen gel, the mammary fragments grew as branching, duct-like structures and displayed a 4-fold increase in cell number during 10 to 12 d of culture.     

Does the medium matter? The interaction of task type and technology on group performance and member reactions.

Investigated the hypothesis that as group tasks pose greater requirements for member interdependence, communication media that transmit more social context cues will foster group performance and satisfaction. 72 3-person groups of undergraduates worked in either computer-mediated or face-to-face meetings on 3 tasks with increasing levels of interdependence: an idea-generation task, an intellective task, and a judgment task. Results showed few differences between computer-mediated and face-to-face groups in the quality of the work completed but large differences in productivity favoring face-to-face groups. Analysis of productivity and of members' reactions supported the predicted interaction of tasks and media, with greater discrepancies between media conditions for tasks requiring higher levels of coordination. Results are discussed in terms of the implications of using computer-mediated communication systems for group work. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

Port Moresby

Port Moresby is the capital of Papua New Guinea. With a population of nearly 200 000 it is by far the largest city in the country. Officially called the National Capital District (NCD), it straddles a low range of coastal hills in the south-east corner of the New Guinea mainland. It is a city facing serious problems today. A narrow economic base, a lack of land suitable for development and a deteriorating law and order situation are compounded by very rapid growth. The proposed construction of a transisland highway this decade, connecting Port Moresby to the populous interior, would have a profound impact on the future of the city.     

High-temperature polyimide nanofoams for microelectronic applications

Foamed polyimides have been developed in order to obtain thin film dielectric layers with very low dielectric constants for use in microelectronic devices. In these systems the pore sizes are in the nanometer range, thus, the term ‘nanofoam’. The polyimide foams are prepared from block copolymers consisting of thermally stable and thermally labile blocks, the latter being the dispersed phase. Foam formation is effected by thermolysis of the thermally labile block, leaving pores of the size and shape corresponding to the initial copolymer morphology. Nanofoams prepared from a number of polyimides as matrix materials were investigated as well as from a number of thermally labile polymers. The foams were characterized by a variety of experiments including TEM, SAXS, WAXD, DMTA, density measurements, refractive index measurements and dielectric constant measurements. Thin film foams, with high thermal stability and low dielectric constants approaching 2.0, can be prepared using the copolymer/nanofoam approach.     

Filtration of diaspirin crosslinked hemoglobin into lung and soft tissue lymph

Diaspirin crosslinked hemoglobin (DCHb) is a new blood substitute manufactured from human blood. To evaluate its microvascular filtration properties, we infused DCLHb into unanesthetized sheep (10%, 20 ml/kg) and measured the flow and composition of lung and soft tissue lymph. For comparison, we also infused human serum albumin (HSA; 10%, 20 ml/kg). DCLHb raised systemic and pulmonary arterial pressures from baseline values of 83 +/- 7 and 13 +/- 2 mm Hg, respectively, to peak values of 113 +/- 9 and 26 +/- 3 mm Hg (p < 0.05 versus baseline). These increases were significantly greater than those associated with HSA, which raised systemic and pulmonary arterial pressures from baseline values of 86 +/- 4 and 13 +/- 2 mm Hg, respectively, to peak values of 97 +/- 3 and 21 +/- 7 mm Hg (p <= 0.05 versus baseline and versus DCLHb). These differences reflect the known pressor properties of DCLHb. Accordingly, DCLHb raised lung and soft tissue lymph flows to peak values of 12.2 +/- 3.8 and 1.6 +/- 0.7 ml/30 min, respectively, while HSA raised lung and soft tissue lymph flows to peak values of 7.5 +/- 4.8 and 4.6 +/- 1.9 ml/30 min, respectively (p <= 0.05 versus DCLHb). The half-times of DCLHb equilibration from plasma into lung and soft tissue lymph of 1. 0 +/- 0.3 and 2.1 +/- 1.1 h, respectively, were significantly faster than HSA equilibration half-times of 3.1 +/- 0.2 and 3.8 +/- 0.9 h. Filtration differences between DCLHb and HSA appear to be due to the pressor properties DCLHb.