Influence of device engineering on the analog and RF performances of SOI MOSFETs

This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).     

Computing Minimal Multi-Homogeneous Bezout Numbers Is Hard

The multi-homogeneous Bezout number is a bound for the number of solutions of a system of multi-homogeneous polynomial equations, in a suitable product of projective spaces. Given an arbitrary, not necessarily multi-homogeneous, system, one can ask for the optimal multi-homogenization that would minimize the Bezout number. In this paper it is proved that the problem of computing, or even estimating, the optimal multi-homogeneous Bezout number is actually NP-hard. In terms of approximation theory for combinatorial optimization, the problem of computing the best multi-homogeneous structure does not belong to APX, unless P = NP. Moreover, polynomial-time algorithms for estimating the minimal multi-homogeneous Bezout number up to a fixed factor cannot exist even in a randomized setting, unless BPP ⫆ NP.     

Generation of frequency-chirped optical pulses in a large-slippagefree-electron laser

We have investigated the optical output of the free-electron laser for infrared experiments (FELIX) when it is driven by an electron beam with a ramped energy. We show that the applied slow ramp on the electron beam energy leads to a frequency chirp on each picosecond optical pulse. Typical values for the chirp are 0.2% frequency sweep across a 1.5-ps-long optical pulse. The optical pulses were analyzed with a double-grating pair and with a second-order autocorrelator. The pulse duration was reduced in the double-grating pair by 20%. A linear dependence of the chirp on the cavity desynchronization was measured     

Utility of scintigraphic methods in patients with fever of unknown origin

BACKGROUND: We assessed the utility of scintigraphy with indium 111-labeled polyclonal human IgG scintigraphy in patients with fever of unknown origin that fulfilled the criteria of temperature of 38.3 degrees C or more for at least 3 weeks and no diagnosis during 1 week of hospital admission. We compared the utility of this technique with results of scintigraphic techniques reported in the literature. METHODS: Data for all patients seen at our university hospital in whom 111In-IgG scanning was performed were analyzed and checked for the criteria for fever of unknown origin. The literature on the utility of scintigraphic techniques in patients with fever of unknown origin was reviewed. RESULTS: We studied 24 patients with fever of unknown origin. In 13 patients, focal 111In-IgG accumulation was observed. In nine (38%) of those, the positive 111In-IgG scintigram led to the final diagnosis; in the other four patients (17%), the scintigraphic findings were not helpful. In the 11 patients with negative 111In-IgG scans, extensive diagnostic workup produced no infection as the final diagnosis in nine patients (38%), one had an abscess in a renal cyst that was detected several months later, and in the other the cause of fever was an infected intravenous line. The overall sensitivity and specificity of 111In-IgG scintigraphy were 81% and 69%, respectively. The positive predictive value was 69% and the negative predictive value was 82%. CONCLUSIONS: Our results show that 111In-IgG scintigraphy significantly contributed to the diagnostic process in patients with fever of unknown origin. A positive scan increased the likelihood of finding the cause of the fever, and a negative scan ruled out an inflammatory component with a high degree of certainty. These data compare favorably with data in the literature concerning other radiopharmaceuticals; a larger prospective evaluation of this technique is indicated.     

Oriented crystallization and mechanical properties of polypropylene nucleated on fibrillated polytetrafluoroethylene scaffolds

It is known that friction deposited polytetrafluoroethylene (PTFE) layers are able to nucleate crystallization of thin films of isotactic polypropylene (iPP). In order to investigate the influence of PTFE on the crystallization behavior and morphology of iPP in bulk, PTFE‐particles of two different sizes in various concentrations were melt‐blended with iPP and subsequently processed by injection molding. For one size of particles, high resolution scanning electron microscopy (HR‐SEM) showed the presence of a PTFE scaffold consisting of highly fibrillated PTFE particles. With X‐ray diffraction (WAXD) pole‐figures, it was evidenced that, after melting and recrystallization of the iPP matrix, a strongly oriented crystallization of iPP on this PTFE scaffold takes place (quiescent crystallization conditions). With WAXD it was also shown that under processing conditions, PTFE acts as a nucleating agent for iPP and that PTFE strongly enhances the formation of processing induced morphologies. Impact and tensile performance of the mixtures were measured. Both the strain energy release rate (G_I) and the E‐modulus were found to increase upon introducing PTFE in iPP. POLYM. ENG. SCI., 45:458–468, 2005. © 2005 Society of Plastics Engineers.     

Small-angle neutron scattering from branched epoxide resins

Small-angle neutron scattering experiments in the range of q² from 0.01 to 25 nm⁻² have been carried out on branched epoxide resins based on bisphenol-A at the Institute Laue—Langevin (I.L.L) in Grenoble (q=(4π/λ) sin(θ/2)). Measurements were made with six samples in the range of M_W from 1500 to 19 000 and four concentrations between 1.3 and 10% (w/w) in deuterated diglyme. The results are as follows: (i) The mean square radius of gyration follows a relationship S²_z=4.69×10⁻⁴M^1.20_W (nm²). (ii) In all cases fairly large second virial coefficients A₂ are obtained which, however, decrease strongly with molecular weight. Above M_W=2500, the virial coefficient follows the relationship A₂=1.6M^−0.85_W (mol cm³g⁻²). (ii) The reciprocal particle scattering factor as a function of q² exhibits only a slight upturn and otherwise shows the behaviour of a randomly branched polycondensate. The slight upturn is discussed as being caused by the finite volume of the monomeric unit. Possible reasons for the high exponent in the S²_z versus M_W dependence are briefly discussed.     

Isolation of the trail recruitment pheromone ofSolenopsis invicta

TheSolenopsis invicta trail pheromone is synthesized by the Dufour's gland and is released through the sting apparatus. The recruitment subcategory of theS. invicta trail pheromone was shown to be composed of a mixture of the orientation pheromone, (Z,E)--farnesene and an unidentified homosesquiterpene consisting of three rings and one double bond (C-1). C-1 is present in worker Dufour's glands at only 75 pg per worker equivalent. This is the first report that demonstrates that different exocrine products from the same gland control different subcategories of behavior related to mass recruitment.     

The Use of Context-Aware Policies and Ontologies to Facilitate Business-Aware Network Management

The purpose of autonomic networking is to manage the business and technical complexity of networked components and systems. However, existing network management data has no link to business concepts. This makes it very difficult to ensure that services offered by the network are meeting business objectives. This paper describes a novel context-aware policy model that uses a combination of modeled and ontological data to determine the current context, which policies are applicable to that context, and what services and resources should be offered to which users and applications.

Finite-source M/M/S retrial queue with search for balking and impatient customers from the orbit

The present paper deals with a generalization of the homogeneous multi-server finite-source retrial queue with search for customers in the orbit. The novelty of the investigation is the introduction of balking and impatience for requests who arrive at the service facility with a limited capacity and FIFO queue. Arriving customers may balk, i.e., they either join the queue or go to the orbit. Moreover, the requests are impatient and abandon the buffer after a random time and enter the orbit, too. In case of an empty buffer, each server searches for a customer in the orbit after finishing service. All random variables involved in the model construction are supposed to be exponentially distributed and independent of each other. The primary aim of this analysis is to show the effect of balking, impatience, and buffer size on the steady-state performance measures. Concentrating on the mean response time, several numerical examples are investigated by the help of the MOSEL-2 tool used for creating the model and calculating the stationary characteristics.