As the number falls,alternatives to the Hagberg–Perten falling number method: A review

This review examines the application, limitations, and potential alternatives to the Hagberg–Perten falling number (FN) method used in the global wheat industry for detecting the risk of poor end-product quality mainly due to starch degradation by the enzyme α-amylase. By viscometry, the FN test indirectly detects the presence of α-amylase, the primary enzyme that digests starch. Elevated α-amylase results in low FN and damages wheat product quality resulting in cakes that fall, and sticky bread and noodles. Low FN can occur from preharvest sprouting (PHS) and late maturity α-amylase (LMA). Moist or rainy conditions before harvest cause PHS on the mother plant. Continuously cool or fluctuating temperatures during the grain filling stage cause LMA. Due to the expression of additional hydrolytic enzymes, PHS has a stronger negative impact than LMA. Wheat grain with low FN/high α-amylase results in serious losses for farmers, traders, millers, and bakers worldwide. Although blending of low FN grain with sound wheat may be used as a means of moving affected grain through the marketplace, care must be taken to avoid grain lots from falling below contract-specified FN. A large amount of sound wheat can be ruined if mixed with a small amount of sprouted wheat. The FN method is widely employed to detect α-amylase after harvest. However, it has several limitations, including sampling variability, high cost, labor intensiveness, the destructive nature of the test, and an inability to differentiate between LMA and PHS. Faster, cheaper, and more accurate alternatives could improve breeding for resistance to PHS and LMA and could preserve the value of wheat grain by avoiding inadvertent mixing of high- and low-FN grain by enabling testing at more stages of the value stream including at harvest, delivery, transport, storage, and milling. Alternatives to the FN method explored here include the Rapid Visco Analyzer, enzyme assays, immunoassays, near-infrared spectroscopy, and hyperspectral imaging.     

Automatic image hanging protocol for chest radiographs in PACS.

Chest radiography is one of the most widely used techniques in diagnostic imaging. It comprises at least one-third of all diagnostic radiographic procedures in hospitals. However, in the picture archive and communication system, images are often stored with the projection and orientation unknown or mislabeled, which causes inefficiency for radiologists' interpretation. To address this problem, an automatic hanging protocol for chest radiographs is presented. The method targets the most effective region in a chest radiograph, and extracts a set of size-, rotation-, and translation-invariant features from it. Then, a well-trained classifier is used to recognize the projection. The orientation of the radiograph is later identified by locating the neck, heart, and abdomen positions in the radiographs. Initial experiments are performed on the radiographs collected from daily routine chest exams in hospitals and show promising results. Using the presented protocol, 98.2% of all cases could be hung correctly on projection view (without protocol, 62%), and 96.1% had correct orientation (without protocol, 75%). A workflow study on the protocol also demonstrates a significant improvement in efficiency for image display.     

Reciprocal Relationships Between Collective Efficacy and Team Performance in Women's Ice Hockey.

This study examined reciprocal relationships between collective efficacy and team performance over a season of competition in women's intercollegiate ice hockey within weekends where the opponent was constant for 2 games. Collective efficacy beliefs within 12 teams were assessed prior to both games for at least 7 weekends. Team performance indexes produced an overall measure of performance for each game. The average influence of Saturday collective efficacy on Saturday performance was moderate and positive after controlling for Friday performance. The average influence of Friday performance on Saturday collective efficacy was small and positive after removing the influence of Friday collective efficacy from Friday performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

高速网络协议：问题与答案

作者在本文中指出了吉比特网络的目标及其所带来的问题，采用了提出问题并回答问题（或说明可能答案）的方法来阐明。     

Prevalence of multiple cardiovascular disease risk factors among women in the United States, 1992 and 1995: the Behavioral Risk Factor Surveillance System

We sought to examine the prevalence of self-reported multiple cardiovascular disease (CVD) risk factors (hypertension, high blood cholesterol, diabetes, overweight, and current smoking) among women in 1992 and 1995 in the United States using data from the Behavioral Risk Factor Surveillance System. In 1992, 37.5%, 34.4%, and 28.1% of women had zero, one, and two or more of the five risk factors, respectively. In 1995, the respective estimates were 35.5%, 34.3%, and 30%. In both years, the prevalence of two or more risk factors increased with age, decreased with educational level, was higher among black women (lowest among Hispanic women and women of other ethnic groups), and higher among women reporting cost as a barrier to healthcare. The percentage of women with two or more risk factors was higher in 1995 than in 1992 for 35 of 48 states, being statistically significant for 7 states. The percentage of women with at least two risk factors was not significantly lower in 1995 than in 1992 for any state. A higher percentage of women reported having multiple CVD risk factors in 1995 compared with 1992. A multifactorial approach to primary prevention and risk factor reduction should be encouraged to help reduce the prevalence and burden of CVD among women.     

Reduced modified quadratures for quadratic membrane finite elements

Reduced integration is frequently used in evaluating the element stiffness matrix of quadratically interpolated finite elements. Typical examples are the serendipity (Q8) and Lagrangian (Q9) membrane finite elements, for which a reduced 2 × 2 Gauss–Legendre integration rule is frequently used, as opposed to full 3 × 3 Gauss–Legendre integration. This ‘softens’ these element, thereby increasing accuracy, albeit at the introduction of spurious zero energy modes on the element level. This is in general not considered problematic for the ‘hourglass’ mode common to Q8 and Q9 elements, since this spurious mode is non‐communicable. The remaining two zero energy modes occurring in the Q9 element are indeed communicable. However, in topology optimization for instance, conditions may arise where the non‐communicable spurious mode associated with the elements becomes activated. To effectively suppress these modes altogether in elements employing quadratic interpolation fields, two modified quadratures are employed herein. For the Q8 and Q9 membrane elements, the respective rules are a five and an eight point rule. As compared to fully integrated elements, the new rules enhance element accuracy due to the introduction of soft, higher‐order deformation modes. A number of standard test problems reveal that element accuracy remains comparable to that of the under‐integrated counterparts. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of exercise and dietary restraint on energy intake of reduced-obese women

Self-selected food intake of 15 reduced-obese women living in a metabolic ward was studied for 14 consecutive days to determine the effect of exercise and other metabolic and behavioral variables on energy intake. A choice of prepared food items were offered at breakfast, lunch and dinner, and a variety of additional food items were available continuously 24 h/day. Subjects performed either moderate intensity aerobic exercise (A-EX) (n = 8) expending 354 +/- 76 kcal/session or low intensity resistance weight training (R-EX)(n =7) expending 96 +/- kcal/session, 5 days/week. Mean energy intakes (kcal/day, +/- SEM) of the exercise groups were similar: 1867 +/- 275 for A-EX, 1889 +/- 294 for R-EX. Mean energy intakes of individuals ranged from 49 to 157% of the predetermined level required for weight maintenance. Resting metabolic rate per kg 0.75 and the Eating Inventory hunger score contributed significantly to the between subject variance in energy intake, whereas exercise energy expenditure did not. Regardless of exercise, eight women consistently restricted their energy intake (undereaters), and seven other consumed excess energy (overeaters). Overeaters were distinguished by higher Eating Inventory disinhibition (P = 0.023) and hunger (p = 0.004) scores. The overeaters' diet had a higher fat content 34 +/- 1% (p = 0.007). Also, overeaters took a larger percentage of their daily energy, than that of undereaters, 27 +/- 1 energy intake in the evening, 13 +/- 2%, compared to undereaters, 7 +/- 1% (p = 0.005). We conclude that the Eating Inventory is useful for identifying reduced-obese women at risk of overeating, and these individuals may benefit from dietary counseling aimed at reducing fat intake and evening snacking.     

Motion patterns of Nabesna Glacier (Alaska) revealed by interferometric SAR techniques

Nabesna Glacier is one of the longest land-terminus mountain glaciers in North America. However, its flow has never been studied. We derived detailed motion patterns of Nabesna Glacier in winter and spring 1994–1996 from the synthetic aperture radar (SAR) images acquired by the European Remote Sensing satellites (ERS-1 and ERS-2) using interferometric SAR (InSAR) techniques. Special effort was made to assess the accuracy of the motion estimates, and remove data points with high uncertainty from the motion profiles, enabling us to obtain reliable glacier flow patterns along the highly curved main course of Nabesna Glacier. The results, covering 80 km of the 87 km main course of the glacier, were used to delineate four distinctive sections in terms of spatial and temporal variability of the glacier speed: (1) the upper section where glacier flow was apparently random both temporally and spatially presumably due to development of crevasses; (2) the upper-middle section with relatively steady flow around 0.27 to 0.4 m/day; (3) the middle section with a stable pattern of acceleration from 0.27–0.3 m/day to the maximum about 0.67–0.73 m/day, followed by a general deceleration to 0.17–0.33 m/day before reaching (4) the lower section where the glacier motion was generally slow yet highly variable although uncertainty in the estimation is high. Occurrence of the flow maximum, as well as many local maxima and minima at consistent locations over different periods suggests that the valley geometry affect the overall flow pattern. On top of this general trend, many small-scale temporal/spatial variations in the glacier flow patterns were observed along the glacier, especially in the lower sections. On average, the flow speeds were in the range of 0.3 to 0.7 m/day; however this lacks any measurements of summer flow speeds which are expected to be significantly higher.