Diluted chemical bath deposition of CdZnS as prospective buffer layer in CIGS solar cell

In this study, dilute chemical bath deposition technique has been used to deposit CdZnS thin films on soda-lime glass substrates. The structural, morphological, optoelectronic properties of as-grown films have been investigated as a function of different Zn²⁺ precursor concentrations. The X-ray diffractogram of CdS thin-film reveals a peak corresponding to (002) plane with wurtzite structure, and the peak shift has been observed with the increase of the Zn²⁺ concentration upon formation of CdZnS thin film. From morphological studies, it has been revealed that the diluted chemical bath deposition technique provides homogeneous distribution of film on the substrate even at a lower concentration of Zn²⁺. Optical characterization has shown that the transparency of the film is influenced by Zn²⁺ concentration and when the Zn²⁺ concentration is varied from 0 M to 0.0256 M, bandgap values of resulting films range from 2.42 eV to 3.90 eV while. Furthermore, electrical properties have shown that with increasing zinc concentration the resistivity of the film increases. Finally, numerical simulation validates and suggests that CdZnS buffer layer with composition of 0.0032 M Zn²⁺ concentration would be a promising candidate in CIGS solar cell.     

Highly efficient photocatalytic degradation of methylene blue using carbonaceous WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> composites

Recent improvements in the performance of photocatalysts made it possible to tackle pollution through environment friendly methods. This study investigates the modification of the photocatalytic activity of TiO₂ by employing WO₃ and conductive polymers, namely, polyaniline (Pani) and polypyrrole (Ppy). Basing on our previous improvement of TiO₂ using a conductive polymer and activated carbon (AC), this study determines the activated carbon forms of TiO₂. The prepared composites are characterized using X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared, thermogravimetric analysis, Brunauer–Emmet–Teller, and UV–Vis spectroscopy. The specific surface area of the mesoporous composites is as follows: WO₃/TiO₂·AC (Pani) > WO₃/TiO₂·AC (Ppy) > WO₃/TiO₂·Pani > WO₃/TiO₂·Ppy (127 > 98 > 68 > 44 m² g^?1), which exhibited a similar trend to the photocatalytic performances (100 > 95 > 91 > 72 % conversion rate). This result could be attributed to higher porosity, surge of charge separation, and photo-responding range extension induced by the synergistic effect of WO₃, conducting polymers, and TiO₂ in the samples.     

Vanadium pentoxide: Synthesis and characterization of nanorod and nanoparticle V2O5 using CTAB micelle solution

Using a surfactant-mediated method (surfactant based on cetyltrimethyl ammonium bromide, CTAB) V₂O₅ nanorod and nanoparticles have been successfully prepared. Morphologies of V₂O₅ nanostructures can be controlled by applying different precursors and by varying reaction conditions within the CTAB soft template. With ammonium metavanadate and sulfuric acid as precursors, nanoparticles are synthesized in the size range of 45–160 nm. Precursors of vanadyl sulfate hydrate and sodium hydroxide yield vanadium pentoxide nanorods with diameters of 30–90 nm and lengths of 260–600 nm. The resulting products are characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), variable pressure scanning electron microscopy (VPSEM) and X-ray photoelectron spectroscopy (XPS). Temperature programmed reduction (TPR) is included to test catalytic performance. The results show that V₂O₅ nanoparticles and nanorods achieve better catalytic performance compared to bulk V₂O₅, i.e. lower onset temperature, workability at lower temperatures, and higher H₂ consumption (μmol/g).     

A review on the role of materials science in solar cells

The demand for energy of modern society is constantly increasing. The desire for environmental-friendly alternative energy resources with the least dependency on fossil fuels is growing. Solar energy is an important technology for many reasons and is worthy of urgent attention. Indeed, it has experienced rapid growth over the last few years. It is expected to become truly main stream when the breakeven of high performance is achieved and its cost becomes comparable with other energy sources. Various approaches have been proposed to enhance the efficiency of solar cells. This paper reviews some current initiatives and critical issues on the efficiency improvement of solar cells from the material sciences and chemistry perspectives.     

Influence of Laves Phase Precipitation and Coarsening on High‐Temperature Strength of Ferritic Stainless Steels

Downsizing trends in the design of internal combustion engines require ferritic steels with greater strength at elevated temperatures. One method of improving the high‐temperature strength is precipitation hardening with intermetallic phases such as the Laves phase. Thermodynamic calculations show, that the elements Nb and Si contribute to the Laves phase formation strongly. In this work, the influence of intermetallic precipitates on the mechanical properties of three different ferritic Fe? Cr stainless steels was investigated and compared to a reference material. The three main hardening mechanisms – precipitation–hardening, grain refinement, and solid‐solution strengthening – were studied with appropriate alloy compositions and thermo mechanical treatment. Investigations were performed with uniaxial compression tests of samples aged isothermally at 900°C for up to 1440 h. It is shown that, the solid solution effect of Mo and W increases the high‐temperature strength about 40%, also after long‐term annealing. The contribution of the Laves phase precipitates on the high‐temperature strength is rather small due to their rapid coarsening.     

Trombe walls: A review of opportunities and challenges in research and development

Green building and sustainable architecture are new techniques for addressing the environmental and energy crises. Trombe walls are regarded as a sustainable architectural technology for heating and ventilation. This article reviews the application of Trombe walls in buildings. The reviews discuss the characteristics of Trombe walls, including Trombe-wall configurations, and Trombe-wall technology. The advantages and disadvantages of this sustainable architectural technology have been highlighted, and future research questions have been identified.     

Development and application of vanadium oxide/polyaniline composite as a novel cathode catalyst in microbial fuel cell

Polyaniline (Pani), vanadium oxide (V₂O₅), and Pani/V₂O₅ nanocomposite were fabricated and applied as a cathode catalyst in Microbial Fuel Cell (MFC) as an alternative to Pt (Platinum), which is a commonly used expensive cathode catalyst. The cathode catalysts were characterized using Cyclic Voltammetry and Linear Sweep Voltammetry to determine their oxygen reduction activity; furthermore, their structures were observed by X‐ray Diffraction, X‐ray Photoelectron Spectroscopy, Brunauer–Emmett–Teller, and Field‐Emission Scanning Electron Microscopy. The results showed that Pani/V₂O₅ produced a power density of 79.26 mW/m², which is higher than V₂O₅ by 65.31 mW/m² and Pani by 42.4 mW/m². Furthermore, the Coulombic Efficiency of the system using Pani/V₂O₅ (16%) was higher than V₂O₅ and Pani by 9.2 and 5.5%, respectively. Pani–V₂O₅ also produced approximately 10% more power than Pt, the best and most common cathode catalyst. It declares that Pani–V₂O₅ can be a suitable alternative for application in a MFC system. Copyright © 2013 John Wiley & Sons, Ltd.     

High‐Interstitial Stainless Austenitic Steel Castings

Interstitial atoms are most effective in strengthening austenitic steels. In stainless grades, chromium strongly reduces the solubility limit of carbon. High‐nitrogen contents require costly pressure or powder metallurgy to dissolve N in the melt. The combination of both elements comes with a high‐interstitial solubility at normal pressure of air. Sand casting with 18 mass% Cr and Mn each and 0.85 mass% (C + N) were industrially produced. The investigation revealed: proof strength R_p0.2 = 457 [MPa], true fracture strength R = 1714 [MPa], fracture elongation A = 44%, notch impact toughness KV = 290 J combined with a DBTT of ?94°C, an impact wear resistance comparable to Hadfield steel X120Mn12 but combined with a good corrosion resistance. Deep freezing and cold working does not effect the low relative magnetic permeability. This unique combination of properties offers advantages in application.     

Prospective follow-up of girls with attention-deficit/hyperactivity disorder into adolescence: Evidence for continuing cross-domain impairment.

The authors performed 5-year prospective follow-up (retention rate = 92%) with an ethnically diverse sample of girls, aged 11-18 years, who had been diagnosed in childhood with attention-deficit/ hyperactivity disorder (ADHD; N = 140) and a matched comparison group (N = 88). Hyperactive-impulsive symptoms were more likely to abate than inattentive symptoms. Across multiple domains of symptoms and functional impairment, girls with ADHD continued to display deficits of moderate to large effect size in relation to the comparison girls, but few differences emerged between the inattentive versus combined types. Follow-up effects withstood statistical control of crucial covariates for most outcomes, meaning that there were specific effects of childhood ADHD on follow-up status; in other instances, baseline disruptive disorders accounted for adolescent effects. For outcomes identical at baseline and follow-up, girls with ADHD showed more improvement across time than comparison girls (except for math achievement). Overall, ADHD in girls portends continuing impairment 5 years after childhood ascertainment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)