Borderline personality organization and prognosis in eating disorders.

Used interview-based assessment of level of personality organization and confirmed the finding of C. Johnson et al (see record 1991-13161-001) that borderline bulimics had a markedly worse prognosis over 1 yr than bulimics without borderline features. Ss in the present study were 31 eating disorder female patients at 1-yr follow-up. However, after 2 and 3 yrs, no such indications were evident. Instead, the borderline patients (9 Ss) unexpectedly caught up, eliminating the initial advantage held by the neurotics (7 Ss), and after 3 yrs, there were no differences in outcome between the groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Milk yield affects time budget of dairy cows in tie-stalls

Effective selection in breeding programs and improved management has increased the milk production per cow. However, the effects of the increased yield on behavior have not yet been clarified. We investigated the effect of milk yield on the time budget of 29 Finnish Ayrshire cows in the same stage of lactation kept in tie-stalls. The time spent lying, eating, ruminating, lying inactive without ruminating, and lying with the neck muscles relaxed, as well as the milk yield of primiparous and multiparous cows were recorded for 2d. The effects of milk yield and parity on behavior were analyzed with mixed models. The mean milk yield was 38.3 kg (SD 7.8) per day. Higher-yielding cows spent more time ruminating while standing and less time lying than lower-yielding cows. The latency to lie inactive without ruminating after lying down decreased as milk yield increased and it was shorter in primiparous compared with multiparous cows. Multiparous cows ruminated more while lying than primiparous cows. High milk yield cows spent a shorter time lying and they fell asleep (lay with neck relaxed) sooner. The degree of daily milk yield was associated with modifications in behavior and cows with high milk production had less lying time even with free access to lie down in the tie-stall.     

Short communication: Lameness impairs feeding behavior of dairy cows

The automated, reliable, and early detection of lameness is an important aim for the future development of modern dairy operations. One promising indicator of lameness is a change in the feeding behavior of a cow. In this study, the associations between feeding behavior and lameness were evaluated. A herd of 50 cows was investigated during the winter season in a freestall barn. Feeding behavior, feed intake, milk yield, and body weight were monitored using electronic feeding troughs and an automated milking system. Gait scoring every second week was used as a measure of lameness. To analyze the effect of lameness on feeding behavior and milk yield, linear mixed models were used. Cows with more severe lameness spent less time feeding per day (104 ± 4, 101 ± 4, and 91 ± 4 min/d for lameness scores 2, 3, and 4, respectively). An interaction between parity and lameness score was detected, with severely lame primiparous cows spending the least time feeding. Severely lame cows fed faster; however, their body weights were lower than for less-lame cows. Increase in lactation stage was associated with longer daily feeding time, longer duration of feeding bouts, and lower feeding rate. Worsening of gait was associated with lower silage intake and less time spent feeding even before severe lameness was scored. The results indicate that lameness is associated with changes in feeding behavior and that such changes could be considered in the future development of remote monitoring systems. It should also be noted that impaired feeding behavior along with lameness can put the welfare of especially early lactating primiparous cows at risk.     

On-farm deaths of dairy cows are associated with features of freestall barns

On-farm death (OFD) of a dairy cow is always a financial loss for a farmer, and potentially a welfare issue that has to be addressed within the dairy industry. The aim of this study was to explore the associations between OFD of dairy cows, housing, and herd management in freestall barns. To achieve the goal, we followed 10,837 cows calving in 2011 in 82 herds. Data were gathered with observations and a structured interview during farm visits and from a national dairy herd improvement database. The hazard of OFD was modeled with a shared frailty survival model, with SAS 9.3 PHREG procedure (SAS Institute Inc., Cary, NC). The study population was 58% Ayrshire and 42% Holstein cows. The median herd size and mean milk yield in the study herds were 116 cows and 9,151 kg of milk per cow per year. The overall probability of OFD was 6.0%; 1.8% of the cows died unassisted and 4.2% were euthanized. Variation in OFD percentage between individual herds was large, from 0 to 16%, accounting for 0 to 58% of all removals in the herds. Keeping close-up dry cows in their own group was associated with higher hazard of OFD [hazard ratio (HR) = 1.37] compared with keeping them in the same pen with far-off dry cows. Higher hazard on OFD was observed when barns had only one kind of calving pen; single (HR = 2.09) or group pens (HR = 1.72), compared with having both of those types. The hazard of OFD was lower if the whole herd was housed in barns or pens that had only 1 type of feed barrier at the feed bunk, namely post-and-rail (HR = 0.51) or a type with barriers between the cow's heads (HR = 0.49), compared with having 2 types. Lower OFD hazard was observed with wider than 340 cm of walking alley next to the feeding table (HR = 0.75), and with housing a whole herd in pens with only 1 type of walking alley surface, specifically slatted (HR = 0.53) or solid (HR = 0.48), compared with having both types. The hazard of OFD was higher with stalls wider than 120 cm (HR = 1.38) compared with narrower stalls. The hazard of OFD was also associated with breed, parity, and calving season. This study identified many factors that contribute to the incidence of OFD of dairy cows. The solutions for reducing on-farm mortality include housing, management, and breeding choices that are most probably herd specific.     

Preferences of dairy cows for three stall surface materials with small amounts of bedding

Farmers’ concerns about the economy, cost of labor, and hygiene have resulted in reduced use of organic bedding in stalls for dairy cows; however, the reduced use of organic bedding possibly impairs cow comfort. The effects of different stall surface materials were evaluated in an unheated building in which only a small amount of bedding was used. The lying time and preferences of 18 cows using 3 stall surface materials (concrete, soft rubber mat, and sand) were compared. All materials were lightly bedded with a small amount of straw, and the amount of straw added to each stall was measured. The cows only had access to stalls of one surface type while their lying time was observed. Lying times were longest on the rubber mats compared with other surfaces (rubber mat 768; concrete 727; sand 707 ± 16 min/d). In a preference test, cows had access to 2 of the 3 types of stalls for 10 d and their stall preference was measured. Cows preferred stalls with rubber mats to stalls with a concrete floor (median 73 vs. 18 from a total of 160 observations per day; interquartile range was 27 and 12, respectively), but showed no preference for sand stalls compared with stalls with a concrete floor or with rubber mats. More straw was needed on sand stalls compared with concrete or mat (638 ± 13 g/d on sand, 468 ± 10 g/d on concrete, and 464 ± 8 g/d on rubber mats). Lying times on bedded mats indicated that mats were comfortable for the cows. If availability or cost of bedding material requires limiting the amount of bedding used, rubber mats may help maintain cow comfort.     

Effects of sand and straw bedding on the lying behavior, cleanliness, and hoof and hock injuries of dairy cows

This experiment compared the effects of sand and straw bedding in free stalls on resting time, cleanliness, hock injuries, and hoof health of dairy cows and tested whether cow preferences for a bedding material depended on the familiarity with the material. A total of 52 dairy cows were kept either on straw bedded concrete stalls or sand stalls for at least 21 wk. The lying behavior was observed, and hock lesions, hoof health, and cleanliness of the cows and stalls were measured. A 5-d preference test between sand and straw stalls was conducted at the end of the experiment. The total daily duration of lying was longer for cows on straw bedding than on sand bedding (straw 749 ± 16 vs. sand 678 ± 19 min). During the preference test, cows that had been kept on straw bedding preferred lying in straw stalls [straw 218.7 (133.4 to 239.7) vs. sand 9.0 min (2.8 to 44.8)]; however, cows that had been kept on sand showed no preference [straw 101.3 (51.7 to 205.9) vs. sand 94.3 min (54.1 to 156.1, median and interquartile range)]. Although there were no differences in the dirtiness of stalls, the cows using straw stalls were dirtier than cows using sand stalls [straw 6.04 (5.39 to 6.28) vs. sand 4.19 (3.62 to 5.16)]. At the end of experiment the severity of hock lesions was lower for cows on sand than for cows on straw [sand 0.5 (0.0 to 1.0) vs. straw 1.0 (1.0 to 2.0)]. The improvement in overall hoof health over the observation period was greater for cows kept on sand compared with cows kept on straw [sand −2.00 (−3.75 to −0.25) vs. straw 0.00 (−2.00 to 2.00)]. Straw bedding increased the time that cows spend lying, and cows preferred straw stalls to sand stalls. However, previous experience with sand reduces avoidance of sand stalls. Sand stalls were advantageous for cow cleanliness and health; hock lesions and claw diseases healed more quickly for cows using sand stalls compared with straw.     

Optimum utilization of nuclear fuel with gas and vapor core reactors

Gas and Vapor Core Reactors (G/VCR) are externally reflected and moderated nuclear energy systems fueled by stable uranium compound in gaseous or vapor phase. In G/VCR systems the functions of fuel and coolant are combined and the reactor outlet temperature is not constrained by solid fuel-cladding temperature limitations. G/VCRs can potentially provide the highest reactor and cycle temperature among all existing or proposed fission reactor designs. Furthermore, G/VCR systems feature a low inventory and fully integrated fuel cycle with exceptional sustainability and safety characteristics. With respect to fuel utilization, there is practically no fuel burn-up limit for gas core reactors due to continuous recycling of the fuel. Owing to flexibility in nuclear design characteristics of cavity reactors, a wide range of conversion ratio from almost solely a burner to a breeder is achievable. The continuous recycling of fuel in G/VCR systems allows for continuous burning and transmutation of actinides without removing and reprocessing of the fuel. The only waste product at the backend of the gas core reactors' fuel cycle is fission fragments that are continuously separated from the fuel. As a result the G/VCR systems do not require spent fuel storage or reprocessing.

G/VCR systems also feature outstanding proliferation resistance characteristics and minimum vulnerability to external threats. Even for comparable spectral characteristic, gas core reactors produce fissile plutonium two orders of magnitude less than Light Water Reactors (LWRs). In addition, the continuous transmutation and burning of actinides further reduces the quality of the fissile plutonium inventory. The low fuel inventory (about two orders of magnitude lower than LWRs for the same power generation level) combined with continuous burning of actinides, significantly reduces the need for emergency planning and the vulnerability to external threats. Low fuel inventory, low fuel heat content, and online separation of fission fragments are among the key constituent safety features of G/VCR systems.     

Structure,chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690

The microstructure in six commercial batches of alloys 600 and 690 has been investigated using scanning electron microscopy (SEM), analytical transmission electron microscopy (ATEM), atom probe field ion microscopy (APFIM), and secondary ion mass spectroscopy (SIMS). The materials were also tested with respect to their resistance to intergranular stress corrosion cracking (IGSCC) in high-purity water at 365 °. Applied microanalytical techniques allowed direct measurement of carbon concentration in the matrix together with determination of grain boundary micro structure and microchemistry in all material conditions. The distribution of oxygen near a crack in material tested with respect to IGSCC was also investigated. The role of carbon and chromium and intergranular precipitates on IGSCC is discussed.