Fully renewable limonene‐derived polycarbonate as a high‐performance alkyd resin

Limonene‐derived polycarbonate‐based alkyd resins (ARs) have been prepared by copolymerization of limonene dioxide with CO₂, catalysed by a β‐diiminate zinc–bis(trimethylsilyl)amido complex, and subsequent chemical modification with soybean oil fatty acids using triphenylethylphosphonium bromide as the catalyst. This quantitative partial modification was realized via epoxy–carboxylic acid chemistry, affording ARs with higher oil lengths, lower polydispersities and higher glass transition temperatures (T_g) in comparison to a conventional polyester AR based on phthalic acid, multifunctional polyol pentaerythritol and soybean fatty acid. The novel limonene polycarbonate AR and the conventional polyester AR were evaluated as coatings and both the physical drying (without the presence of the oxidative drying accelerator Borchi® Oxy Coat) and chemical curing (with Borchi® Oxy Coat) processes of these coatings were monitored by measuring the König hardness and complex modulus development with time. A better performance was obtained for the alkyd paint containing polycarbonates modified with fatty acids (FA‐PCs), which showed a faster chemical drying, a higher König hardness and a higher T_g in coating evaluation, demonstrating that the fully renewable FA‐PCs are promising resins for alkyd paint applications. © 2019 Society of Chemical Industry     

National survey of mammographic facilities in 1985, 1988, and 1992

PURPOSE: To determine trends in mammography in the United States. MATERIALS AND METHODS: A sample of mammographic facilities was selected for each year of the Nationwide Evaluation of X-ray Trends. The same protocol was followed for the 1985, 1988, and 1992 surveys. Data were collected with use of the same imaging phantom for all three surveys and also with a different phantom in the 1988 and 1992 surveys. RESULTS: Of the 356 facilities surveyed in 1992, 59% claimed to be in compliance with the Health Care Financing Administration (HCFA) mammography requirements, 42% were accredited by the American College of Radiology (ACR), and 23% did not hold credentials from either the HCFA or the ACR. Since 1985, there has been a 34% improvement in acceptable phantom image quality score and a 20% decrease in the mean glandular dose. CONCLUSION: Mammography as practiced today is essentially a screen-film technique. Mammographic phantom image quality has improved considerably. The overall mean glandular dose has decreased primarily because of the elimination of xeroradiography.     

The function of the reproductive system in x-ray-irradiated male rats after the transplantation of a culture of testicular cells from newborn piglets

The effect exerted by transplantation of the 5 day culture of testicles from newly born piglets on the hypogonadal state of mature X-ray irradiated (3 Gy) rats was studied. It has been found that a month after transplantation (two months after irradiation) the hypogonadal state disappeared for a while, which is confirmed by normalization of the weight of seminal vesicles, content of testosterone and biologically active lutropine, restoration of the reproductive function of rats. No significant changes in steroidogenesis activity have been found, which proves a substituent character of transplantation. The effect disappears three months later but certain restoration of the content of nucleic acids in the testicles is observed.     

Titanium and bioactive glass-ceramic coated titanium as materials for keratoprosthesis

The current problem with keratoprosthesis is the ingrowth of corneal or conjunctival epithelium into the anterior chamber. This may lead to infections and extrusion of the prosthesis as well as to the development of retroprosthetic membrane and secondary glaucoma. Glass-ceramic coated and uncoated titanium has been tested as material for the keratoprosthesis to prevent epithelial ingrowth. Twenty-two Supra-Descemet's membrane keratoprostheses were inserted in the eyes of 22 rabbits for 1, 2, 4, 8, or 12 months. The prosthesis had an optic part made of polymethylmetacrylate (PMMA). The support for the optic part and the flange of the prosthesis were made of titanium. Eleven of the prostheses were coated with glass-ceramic. The histological sections of the enucleated eyes were prepared through the central part of the cornea and the prosthesis using a cutting-grinding method. The histological analysis was made on both halves of the implants separately giving two analysis areas in each eye. All 11 titanium prostheses were retained for the time period planned. Two glass-ceramic coated prostheses were lost at 2 and 4 weeks, respectively. This was caused by difficulties at surgery due to a thick coating. These eyes were excluded from the histological analysis. No significant ingrowth of epithelium was seen in 15/18 (83%) and in 16/22 (73%) of the analysed areas of the glass-ceramic coated and titanium prostheses, respectively. Titanium appears to be a suitable material for the keratoprosthesis. The ingrowth of the epithelium may be hindered further by coating the titanium with bioactive glass-ceramic.     

Isoproterenol evokes extracellular Ca2+ spikes due to secretory events in salivary gland cells

Secretory cells should in principle export substantial amounts of calcium via exocytosis since Ca2+ is sequestered in secretory granules. Based on a new technique for measurements of the extracellular calcium concentration in the vicinity of the cell membrane and on the droplet technique, we have monitored the rate of calcium extrusion from salivary gland acinar cells. Isoproterenol (ISP), a beta-adrenergic agonist and powerful secretogogue, evoked no change in the cytosolic free Ca2+ concentration ([Ca2+]i) but induced vigorous extracellular Ca2+ concentration ([Ca2+]i) spiking. The absence of [Ca2+]i elevation and the pulsatile nature of the changes in [Ca2+]i indicate that these spikes are most likely due to calcium release from secretory granules. The cholinergic agonist acetylcholine (ACh), which induces moderate secretion, evoked a marked rise in [Ca2+]i and a smooth rise in [Ca2+]i, most likely induced by plasma membrane calcium pumps, on which shortlasting [Ca2+]i spikes were superimposed. The rate of ISP-induced calcium efflux was very substantial. The calculated calcium loss during the first 100 s of supramaximal stimulation corresponded to a reduction of the total cellular calcium concentration of approximately 0.4 mM. We conclude that in salivary glands, calcium release via exocytosis is one of the main mechanisms extruding calcium from cells to the extracellular milieu.     

Thyroid surgery for tumours: the Semon Lecture, presented at the RSM November 1996

1,1,1-Trichloroethane (TRI) is a commonly used industrial solvent with a considerable potential for inhalation abuse. Previous studies in our laboratory and elsewhere have shown that this agent exerts a suppressant effect on operant responding, as well as a number of additional neurobehavioral effects that are similar to those of central nervous system (CNS) depressant drugs. In an effort to provide information relevant to potential mechanisms involved in the behavioral effects and abuse potential of TRI, the present study evaluated the acute effects of this agent on the activity of the hypothalamo-pituitary-adrenal (HPA) axis . Male Sprague-Dawley rats were exposed to 3500 or 5000 ppm TRI by inhalation for 10 or 30 min. Following exposure, plasma levels of adrenocorticotropic hormone (ACTH) and corticosterone and levels of ACTH and corticotropin-releasing factor (CRF) in three brain regions--hypothalamus, hippocampus, and frontal cortex--were determined by selective radioimmunoassays. Levels of TRI in the three brain regions as well as blood were measured by headspace gas chromatography to determine the target tissue concentrations responsible for neuroendocrine changes. Uptake of TRI in blood and all brain regions was very rapid, with stable concentrations apparently achieved within 10 min and maintained for 30 min. During this time course, a significant decrease in plasma corticosterone was produced at 30 min but no significant change in plasma ACTH was observed with 3500 ppm TRI. However, after exposure to 5000 ppm, both plasma ACTH and plasma corticosterone were significantly reduced at 10 and 30 min. ACTH levels in the three brain regions were not significantly changed by TRI, while hypothalamic CRF was significantly increased during exposure to 3500 ppm. However, hypothalamic concentrations of CRF declined following 30 min at 3500 ppm and were not significantly changed by 5000 ppm. This complexity of effects on the regulation of HPA axis activity likely precluded the establishment of consistent relationships between changes in hormonal levels and blood or regional brain concentrations of the inhalant. However, these actions of TRI were strikingly similar to those previously reported for the benzodiazepines.     

Development of a simple model for batch and boundary information updation for a similar ship’s block model

In early 2000,large domestic shipyards introduced shipbuilding 3D computer-aided design (CAD) to the hull production design process to define manufacturing and assembly information.The production design process accounts for most of the man-hours (M/H) of the entire design process and is closely connected to yard production because designs must take into account the production schedule of the shipyard,the current state of the dock needed to mount the ship’s block,and supply information.Therefore,many shipyards are investigating the complete automation of the production design process to reduce the M/H for designers.However,these problems are still currently unresolved,and a clear direction is needed for research on the automatic design base of manufacturing rules,batches reflecting changed building specifications,batch updates of boundary information for hull members,and management of the hull model change history to automate the production design process.In this study,a process was developed to aid production design engineers in designing a new ship’s hull block model from that of a similar ship previously built,based on AVEVA Marine.An automation system that uses the similar ship’s hull block model is proposed to reduce M/H and human errors by the production design engineer.First,scheme files holding important information were constructed in a database to automatically update hull block model modifications.Second,for batch updates,the database’s table,including building specifications and the referential integrity of a relational database were compared.In particular,this study focused on reflecting the frequent modification of building specifications and regeneration of boundary information of the adjacent panel due to changes in a specific panel.Third,the rollback function is proposed in which the database (DB) is used to return to the previously designed panels.