Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

Multichromic polymers based on pyrene clicked thienylpyrrole

In this study, the effect of pendant pyrene on the optical and electronic properties of poly(2,5‐dithienylpyrrole)s was studied. For this purpose a new pyrene coupled 2,5‐dithienylpyrrole derivative (SNS‐pyrene) was synthesized through click reaction. SNS‐pyrene was electrochemically polymerized and its electrochemical and optical properties were investigated by electrochemical and optical techniques. The polymer had a band gap of 3.36 eV and displayed light green to blue color variation upon oxidation in less than 2.48 s. Additionally, electrochemical copolymerization of SNS‐pyrene with 3,4‐ethylenedioxythiophene was achieved whilst a detailed investigation was performed on the effect of electrochemical polymerization conditions on the optoelectronic properties of the copolymers. Studies revealed that the copolymers exhibit multichromic reversible redox behavior with lower band gaps and shorter switching times than their parent polymer, P(SNS‐pyrene) © 2014 Society of Chemical Industry.     

An experimental study on air window collector having a vertical blind for active solar heating

In this study, an air window collector having vertical black blinds was investigated experimentally under actual outdoor conditions. The vertical blind was installed between two 120 × 80 cm glass panes. It can rotate about the vertical axis. The fully open position makes a 90° angle with the vertical plane. A commercially available blind made of cloth and coated with black paint was tested. The air circulation in the system is provided by a fan parallel to blinds. Various parameters were measured and recorded using a data acquisition system. The effect of these parameters on the thermal performance of the system were determined experimentally.     

An experimental and three-dimensional numerical study of natural convection heat transfer between two horizontal parallel plates

In this study, experimental and three-dimensional numerical studies were performed to investigate the effects of plate spacing and temperature difference on natural convection between isothermally heated upward-facing lower horizontal plate and externally insulated horizontal upper plate. Air is used as the heat transfer medium. Rayleigh number varied in the 1108–2.339 × 10⁵ range. Several numerical simulations for three-dimensional steady laminar and turbulent flows heat transfer were carried out using a commercial CFD code Fluent 6.2. Results have shown that there is a good agreement between the numerical and present experimental results as well as with available data in literature.     

Laser-induced fluorescence visualization of ion transport in a pseudo-porous capacitive deionization microstructure

In this paper, a microfluidic experimental set-up is introduced to study the ionic transport in an artificial capacitive deionization (CDI) cell. CDI is a promising desalination technique, which relies on the application of an external electric field and high surface area porous electrodes for ion separation and storage. Photolithography and deep reactive ion etching were used to fabricate a micro-CDI channel with pseudo-porous electrodes on a silicon-on-insulator substrate. Laser-induced fluorescence was performed using cationic Sulforhodamine B (SRB) fluorescent dye to measure ion concentration within the bulk solution and more importantly, within the porous electrodes during the desalination process, with an average normalized root mean square deviation of 8.2 %. Using this set-up, electromigration of ions within the electrode was visualized and the effect of applied electric potential on bulk solution concentration distribution is quantified. In addition, SRB and Fluorescein were used together to visualize anion and cation concentrations simultaneously. The method presented in this study can be used for solution concentrations up to approximately 0.7 mM. The ionic concentration profiles obtained by this approach can be used to test and validate the existing electrosorption models, and pseudo-porous electrodes can be modified to observe the effects of pore size, shape and distribution on electrosorption performance. Furthermore, with proper modifications, the microfabricated structure and experimental set-up can be used for CDI-on-a-chip applications and bio-separation devices.     

Image blur and energy broadening effects in XPEEM

We report image blurring and energy broadening effects in energy-filtered XPEEM when illuminating the specimen with soft X-rays at high flux densities. With a flux of 2×10¹³ photons/s, the lateral resolution in XPEEM imaging with either core level or secondary electrons is degraded to more than 50 nm. Fermi level broadening up to several hundred meV and spectral shift to higher kinetic energies are also systematically observed. Simple considerations suggest that these artifacts result from Boersch and Loeffler effects, and that the electron-electron interactions are strongest in the initial part of the microscope optical path. Implications for aberration corrected instruments are discussed.