Modeling of the Magnetization and Magnetocaloric Effect in Ni2MnGa Heusler Alloy with the Effective Field Theory

Journal of Low Temperature Physics - This study modeled and investigated the magnetocaloric effect in Ni2MnGa Heusler alloy characterized by its magnetic entropy change (ΔSm) and its...     

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Second harmonic generation from a ferroelectric film

We derive an expression for transmittivity (T_SHG) of second harmonic generation (SHG) signals from a ferroelectric (FE) film. Intensities of up and down fields in the medium are investigated in relation to T_SHG. The derivations are made based on undepletion of input fields and nonlinear wave equation derived from the Maxwell equations. We present two cases: film without mirrors and with partial mirrors. Expressions for the newly derived nonlinear susceptibility coefficients of SHG for real crystal symmetry [J. Opt. Soc. Am. B 19 (2002) 2007] are used to get more realistic results. Variations in T_SHG with respect to film thickness are illustrated.     

Synthesis of heterocyclic metal complexes and their evaluation as marine antifoulants

4-Amino-3-thio-1,24-triazolidine (L₁) and 4-amino-5-thio-1,3,4-thiadiazole (L_II) as well as their metal complexes of the general formulae ML_I·2H₂O and ML_IICl (M; Pb(II), Cd(II) and Zn(II)) were prepared. With Sn(II), we obtained Sn(L_I)₂·2H₂O and SnL_IICl, respectively. The structures of the compounds were identified through elemental analysis, and IR and UV spectra measurements, in addition to thermal analysis in case of the metal complexes. The antifouling properties of the compounds were tested by their incorporation into paint formulations which were applied to PVC substrates and tested in water from Alexandria western harbour. When the compounds were added at 17·5% by volume, the coated panels were fouled after 3 months of immersion. The addition of 6·7% by volume of tributyltin oxide to 15·8% of the prepared compounds in one formulation elevated the paint efficiency and prevented fouling for 11 months. Paint containing solely tributyltin oxide at the same concentration was inactive against algae.     

Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).     

Capacitated Clustering Problems by Hybrid Simulated Annealing and Tabu Search

The capacitated clustering problem (CCP) is the problem in which a given set of weighted objects is to be partitioned into clusters so that the total weight of objects in each cluster is less than a given value (cluster ‘capacity’). The objective is to minimize the total scatter of objects from the ‘centre’ of the cluster to which they have been allocated. A simple constructive heuristic, a R-interchange generation mechanism, a hybrid simulated annealing (SA) and tabu search (TS) algorithm which has computationally desirable features using a new non-monotonic cooling schedule, are developed. A classification of the existing SA cooling schedules is presented. The effects on the final solution quality of the initial solutions, the cooling schedule parameters and the neighbourhood search strategies are investigated. Computational results on randomly generated problems with size ranging from 50 to 100 customers indicate that the hybrid SA/TS algorithm out-performs previous simulated annealing algorithms, a simple tabu search and local descent algorithms.     

Short-term preoperative radiotherapy results in down-staging of rectal cancer: a study of 1316 patients

OBJECTIVE: The incidence of back pain in children in our country is unknown. Several causes can produce this symptom, but it is necessary to rule out pathologies that require specific treatments. The goal of this work was to study the incidence and the etiology of back pain in children in our country. PATIENTS AND METHODS: We present a prospective study done in our Orthopedic Department during a period of 7 months. Twenty-two patients were referred with back pain of at least two months duration. The incidence was 2.9% compared to the total number of patients. The average age ranged from 7 to 17 years. RESULTS: A careful history and a radiological examination diagnosed 50% (11 cases) of the causes of backache in the present study. An idiopathic etiology was the most frequent cause and represented 9 patients (41%). In the remaining 12 cases (59%) pathological causes that required special treatment were identified including 2 cases of Scheuermann disease, 4 cases of painful scoliosis, 3 spondylolysis with spondylolisthesis, 2 cases of discitis, 1 benign neoplasm and 1 psychogenic cause. CONCLUSIONS: We recommend conservative management with the use of medication for relief of pain and physical therapy in the idiopathic cases. In the remaining cases, the specific treatment of the disease can improve the back pain.     

A STOCHASTIC CHARACTERIZATION OF THE MACHINE TOOL WORKPIECE SYSTEM IN BTA OEEP HOLE MACHINING Part I: Mathematical Modelling and Analysis

A three dimensional model of the BTA deep-hole machining system is presented by modelling each of the components separately and later combining to represent the total system. A model for the interaction between the workpiece and the cutting tool is also included. Such a model can determine the response of any component of the machine tool as well as the individual influence on the system performance. Based on this, physical models representing the three working methods in the BTA process can be studied, from which stochastic differential equations are derived to represent the resultant force system on the machine tool

A physical model for the stationary workpiece and rotating cutting tool working method is developed. The assumed modes method along with the Lagrange' equation is used to obtain the stochastic differential equation to represent the influence of axial force and torque, in order to obtain the response of the system under the action of the axial force and torque to predict the stability behaviour.     

Cellular neural network with trapezoidal activation function

This paper presents a cellular neural network (CNN) scheme employing a new non‐linear activation function, called trapezoidal activation function (TAF). The new CNN structure can classify linearly non‐separable data points and realize Boolean operations (including eXclusive OR) by using only a single‐layer CNN. In order to simplify the stability analysis, a feedback matrix W is defined as a function of the feedback template A and 2D equations are converted to 1D equations. The stability conditions of CNN with TAF are investigated and a sufficient condition for the existence of a unique equilibrium and global asymptotic stability is derived. By processing several examples of synthetic images, the analytically derived stability condition is also confirmed. Copyright © 2005 John Wiley & Sons, Ltd.     

Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.