Revised Estimates of Dimension and Exercise Variance Components in Assessment Center Postexercise Dimension Ratings.

The authors reanalyzed assessment center (AC) multitrait-multimethod (MTMM) matrices containing correlations among postexercise dimension ratings (PEDRs) reported by F. Lievens and J. M. Conway (2001). Unlike F. Lievens and J. M. Conway, who used a correlated dimension-correlated uniqueness model, we used a different set of confirmatory-factor-analysis-based models (1-dimension-correlated Exercise and 1-dimension-correlated uniqueness models) to estimate dimension and exercise variance components in AC PEDRs. Results of reanalyses suggest that, consistent with previous narrative reviews, exercise variance components dominate over dimension variance components after all. Implications for AC construct validity and possible redirections of research on the validity of ACs are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

STRESS INTENSITY FACTORS AND WEIGHT FUNCTIONS FOR SEMI-ELLIPTICAL SURFACE CRACKS IN FINITE-THICKNESS PLATES UNDER TWO-DIMENSIONAL STRESS DISTRIBUTION

Abstract— A Fourier series approach is proposed to calculate stress intensity factors using weight functions for semi-elliptical surface cracks in flat plates subjected to two-dimensional stress distributions. The weight functions were derived from reference stress intensity factors obtained by three-dimensional finite element analyses. The close form weight functions derived are suitable for the calculation of stress intensity factors for semi-elliptical surface cracks in flat plates under two-dimensional stress distributions with the crack aspect ratio in the range of 0.1 ≤ a/c ≤ 1 and relative depth in the range of 0 ≤ a/t ≤ 0.8. Solutions were verified using several two-dimensional non-linear stress distributions; the maximum difference being 6%.     

Risk factors for a medically inappropriate admission to a Department of Internal Medicine

OBJECTIVE: To identify patient- and admission-related risk factors for a medically inappropriate admission to a department of internal medicine. METHODS: Cross-sectional study of a systematic sample of 500 admissions to the department of internal medicine of an urban teaching hospital. The appropriateness of each admission and reasons for inappropriate admissions were assessed using the Appropriateness Evaluation Protocol. Risk factors included the time (day of week and holidays) and manner (through emergency department or direct admission) of admission, patient age and sex, health status of patient and spouse, living arrangements, formal home care services, and informal support from family or friends. RESULTS: Overall, 76 (15.2%) hospital admissions were rated as medically inappropriate by the Appropriateness Evaluation Protocol. In multivariate analysis, the likelihood of an inappropriate admission was increased by better physical functioning of the patient (odds ratio [OR], 1.5; 95% confidence interval [CI], 1.1-2.1 [for 1 SD in Physical Functioning scores]), lower mental health status of the patient's spouse (OR, 2.6; 95% CI, 1.3-5.6), receipt of informal help from family or friends (OR, 3.3; 95% CI, 1.5-7.2), and hospitalization by one's physician (OR, 3.6; 95% CI, 1.7-7.5). Receiving formal adult home care was not associated with inappropriateness of hospitalization. CONCLUSIONS: Inappropriate admissions to internal medicine wards are determined by a mix of factors, including the patient's health and social environment. In addition, the private practitioners' discretionary ability to hospitalize their patients directly may also favor medically inappropriate admissions.     

The ability of the rat to metabolize myristoyl-methionine: an acylamino acid with potentially useful antibacterial properties

Two experiments with Sprague Dawley rats tested their ability to hydrolyse myristoyl-methionine (M-M) into myristic acid and L-methionine (M). In the first experiment, lasting for 3 days. male rats were orally administered [9,10-3H]myristoyl-L-[35S]methionine. The recovery of radioactivity was approximately 90% for both isotopes; 19% of the administered 3H was recovered in the urine and 16% in the faeces, while the recovered 35S activity was 13 and 12%, respectively. The balance of the radioactivity was found among the tissues, organs and blood. In the second experiment, male and female rats received soybean-based diets which were supplemented with either 0.305% M-M or 0.2% M (both diets contained equal amounts of M) for periods up to 4 weeks. The growth rate of the rats receiving the 0.305% M-M diets was slightly slower than that for the rats on the 0.2% M diet, but the difference was not statistically significant (P > 0.05). The M-M rats had a transitory decrease in feed consumption, suggesting that palatability may have contributed to the growth difference and that a somewhat greater amount of M-M was necessary for the rat to attain the same growth rate as that produced by 0.2% M. When the amount of dietary M-M was increased to 3.05% M-M, a greater reduction in feed consumption and body weight gain was observed. This latter diet was an initial attempt to study the potential toxicity of M-M. None of the haematological, clinical chemistry or organ weight data suggested that M-M was overtly toxic per se, but longer-term feeding studies are needed to evaluate the potential toxicity of M-M more fully.     

Kinetic analysis of the coding properties of O6-methylguanine in DNA: the crucial role of the conformation of the phosphodiester bond

Production by N-nitroso compounds of O6-alkylguanine (O6-alkylG) in DNA directs the misincorporation of thymine during DNA replication, leading to G:C to A:T transition mutations, despite the fact that DNA containing O6-alkylG:T base pairs is less stable than that containing O6-alkylG:C pairs. We have examined the kinetics of incorporation by Klenow fragment (KF) of Escherichia coli DNA polymerase I of thymine (T) and of cytosine (C) opposite O6-MeG in the template DNA strand. Both T and C were incorporated opposite O6-MeG much slower than nucleotides forming regular A:T or G:C base pairs. Using various concentrations of dTTP, dCTP, or their phosphorothioate (Sp)-dNTP alpha S analogues, or a mixture of dTTP and dCTP, the progress of incorporation of a single nucleotide in a single catalytic cycle of a preformed KF-DNA complex was measured (pre-steady-state kinetics). The results were consistent with the kinetic scheme (Kuchta, R. D., Benkovic, P., & Benkovic, S. J. (1988) Biochemistry 27, 6716-6725): (1) binding of dNTP to polymerase-DNA; (2) conformational change in polymerase; (3) formation of phosphodiester between the dNTP and the 3'-OH of the primer; (4) conformational change of polymerase; (5) release of pyrophosphate. The results were analyzed mathematically to identify the steps at which the rate constants differ significantly between the incorporation of T and C. The only significant difference was the 5-fold difference in the rates of formation of the phosphodiester bond (for dTTP, kforward = 3.9 s-1 and kback = 1.9 s-1; for dCTP, kforward = 0.7 s-1 and kback = 0.9 s-1). These pre-steady-state progress curves were biphasic with a rapid initial burst followed by an apparently steady-state rise. Deconvolution of these curves gave direct evidence for the importance of the conformational change after polymerization by showing that the curves represented the sum of the rapid accumulation of the product of step 3 followed by the slow conversion of that to the product of step 5 (because of the rapidity of the release of pyrophosphate there was no significant accumulation of the product of step 4). The equilibrium constants for each step suggest that the greatest change in the Gibbs free energy occurs at the conformational change after polymerization and that while the formation of the phosphodiester bond to T is slightly exothermic, that to C is slightly endothermic.(ABSTRACT TRUNCATED AT 400 WORDS)     

An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Crystal structure of tyrosine hydroxylase at 2.3 A and its implications for inherited neurodegenerative diseases

Tyrosine hydroxylase (TyrOH) catalyzes the conversion of tyrosine to L-DOPA, the rate-limiting step in the biosynthesis of the catecholamines dopamine, adrenaline, and noradrenaline. TyrOH is highly homologous in terms of both protein sequence and catalytic mechanism to phenylalanine hydroxylase (PheOH) and tryptophan hydroxylase (TrpOH). The crystal structure of the catalytic and tetramerization domains of TyrOH reveals a novel alpha-helical basket holding the catalytic iron and a 40 A long anti-parallel coiled coil which forms the core of the tetramer. The catalytic iron is located 10 A below the enzyme surface in a 17 A deep active site pocket and is coordinated by the conserved residues His 331, His 336 and Glu 376. The structure provides a rationale for the effect of point mutations in TyrOH that cause L-DOPA responsive parkinsonism and Segawa's syndrome. The location of 112 different point mutations in PheOH that lead to phenylketonuria (PKU) are predicted based on the TyrOH structure.     

Excited-state-absorption cross sections and amplifier modeling inthe 1300-nm region for Nd-doped glasses

The performance of Nd³⁺-doped fibre amplifiers is limited by strong excited-state absorption (ESA) of the signal, and, even for fluorozirconate glasses, ESA prevents the important region below 1320 nm from being used. To quantify this limitation and explore alternative host materials, ESA and stimulated-emission cross sections have been measured for a representative group of glass compositions. These parameters have been used in an accurate fiber-amplifier model to provide the first quantitative comparisons of performance for Nd³⁺ -doped glasses in the 1300-nm band as a function of host     

Non-contact handling in microassembly: Acoustical levitation

Microassembly is currently of the utmost importance in industry. Nevertheless, the classical assembly processes are no longer usable for very small components, typically ranging from 10  m to 10 mm, since usually neglected surface forces disturb the handling task by inducing adhesion between the component and the gripper. A promising alternative to tackle surface forces consists in levitating the handled component. The various advantages of this contactless handling method are reviewed here and justify the choice of this approach. Consequently, the numerous physical principles suitable for contactless handling are briefly described together with their limitations. The evaluation shows that acoustic levitation is best fitted in the case of microassembly. A classification of literature applications is presented hereafter with special focus on acoustic levitation. Finally, the most common models of acoustical levitation are inspected in a general way. The described models come within the scope of non-linear acoustics.