Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Optimization of flow in additively manufactured porous columns with graded permeability

Chemical engineering systems often involve a functional porous medium, such as in catalyzed reactive flows, fluid purifiers, and chromatographic separations. Ideally, the flow rates throughout the porous medium are uniform, and all portions of the medium contribute efficiently to its function. The permeability is a property of a porous medium that depends on pore geometry and relates flow rate to pressure drop. Additive manufacturing techniques raise the possibilities that permeability can be arbitrarily specified in three dimensions, and that a broader range of permeabilities can be achieved than by traditional manufacturing methods. Using numerical optimization methods, we show that designs with spatially varying permeability can achieve greater flow uniformity than designs with uniform permeability. We consider geometries involving hemispherical regions that distribute flow, as in many glass chromatography columns. By several measures, significant improvements in flow uniformity can be obtained by modifying permeability only near the inlet and outlet.     

Occupational injuries among working adolescents in New York State

OBJECTIVE: To determine the number, distribution, determinants, and health consequences of occupational injuries among working adolescents in New York State. DESIGN: A retrospective, population-based analysis of New York State workers' compensation award data and the Annual Demographic File, a supplement to the US Bureau of the Census Current Population Survey. PARTICIPANTS: Adolescents, aged 14 through 17 years, who received workers' compensation awards for occupational injury from 1980 through 1987. MAIN OUTCOME MEASURES: (1) Numbers, types, and rates of occupational injuries in working adolescents by age, sex, industry, and occupation; (2) health consequences of injury, especially disability and death; and (3) secular trends in injury award rates. RESULTS: A total of 9656 adolescents were compensated for occupational injuries; 4201 compensated adolescents (43.5%) suffered permanent disability; 31 working adolescents died. The annual mean rate of compensated occupational injury was 28.2 per 10,000 adolescent workers. Rates were higher in males than in females and ranged from 8.2 per 10,000 in 14-year-old male workers to 46.8 per 10,000 in 17-year-old male workers. Highest rates by industry were seen in manufacturing (49.0/10,000 adolescent workers) and agriculture (46.2/10,000). Unskilled labor was the most dangerous occupation (52.3/10,000). CONCLUSION: Occupational injuries are a substantial and underrecognized contributor to the continuing epidemic of injury among adolescents.     

Modeling ion implantation of HgCdTe

Ion implantation of boron is used to create n on p photodiodes in vacancy-doped mercury cadmium telluride (MC.T). The junction is formed by Hg interstitials from the implant damage region diffusing into the MC.T and annihilating Hg vacancies. The resultant doping profile is n⁺/n^-/p, where the n⁺ region is near the surface and roughly coincides with the implant damage, the n^- region is where Hg vacancies have been annihilated revealing a residual grown-in donor, and the p region remains doped by Hg vacancy double acceptors. We have recently developed a new process modeling tool for simulating junction formation in MC.T by ion implantation. The interstitial source in the damage region is represented by stored interstitials whose distribution depends on the implant dose. These interstitials are released into the bulk at a constant, user defined rate. Once released, they diffuse away from the damage region and annihilate any Hg vacancies they encounter. In this paper, we present results of simulations using this tool and show how it can be used to quantitatively analyze the effects of variations in processing conditions, including implant dose, annealing temperature, and doping background.     

Sacrospinous colpopexy in the management of uterovaginal prolapse

The tet(M) genes were characterized from 84 isolates of 10 different bacterial species isolated from the periodontal pockets of 16 patients with periodontal disease. A 740 bp polymerase chain reaction product from the hypervariable region of the tet(M) structural gene was cleaved with the restriction enzymes AluI and HinfI. Three different restriction patterns were identified for each of the two enzymes. By DNA sequencing, using a direct solid-phase automated sequencing method, the isolates could be grouped into 3 different clusters of tet(M) subtypes. The internal DNA homology within each subtype was 98-100%; the homology between clusters was 89-94%. Two different subtypes were identified in 9 of 10 bacterial species, and the remaining species had 3 different subtypes. One of the subtypes (M3) was seen mainly in the anaerobic isolates. This subtype was different from all earlier sequenced structural tet(M) genes present in the Genbank. Most patients had two different subtypes of tet(M), and a third subtype was seen in the 3 patients who exhibited the greatest variety of tetracycline-resistant bacterial species. It appears that the presence of one subtype of the tet(M) gene within a patient or bacterial species does not prevent the acquisition of another subtype of the same gene. This study identified a new subtype of the tet(M) gene and grouped it into 3 distinct yet highly homologous genetic subtypes.     

Efficient random subcloning of DNA sheared in a recirculating point-sink flow system

Based on a high-performance liquid chromatographic pump, we have built a device that allows recirculation of DNA through a 63-microm orifice with ensuing fractionation to a minimum fragment size of approximately 300 base pairs. Residence time of the DNA fragments in the converging flow created by a sudden contraction was found to be sufficiently long to allow extension of the DNA molecules into a highly extended conformation and, hence, breakage to occur at midpoint. In most instances, 30 passages sufficed to obtain a narrow size distribution, with >90% of the fragments lying within a 2-fold size distribution. The shear rate required to achieve breakage was found to be inversely proportional to the 1.0 power of the molecular weight. Compared with a restriction digest, up to 40% of all fragments could be cloned directly, with only marginal improvements in cloning efficiency having been observed upon prior end repair with Klenow, T4 polymerase or T4 polynucleotide kinase. Sequencing revealed a fairly random distribution of the fragments.     

Effect of preoperative supplementation with alpha-tocopherol and ascorbic acid on myocardial injury in patients undergoing cardiac operations

Augmentation of antioxidant defenses may help protect tissues against ischemia-reperfusion injury associated with operations involving cardiopulmonary bypass. In this study we examined the effect of pretreating patients with alpha-tocopherol (vitamin E) and ascorbic acid (vitamin C) or placebo on injury to the myocardium. Seventy-six subjects undergoing elective coronary artery bypass grafting participated in a prospective, double-blind, placebo-controlled randomized trial, receiving either placebo or both 750 IU dl-alpha-tocopherol per day for 7 to 10 days and 1 gm ascorbic acid 12 hours before the operation. Plasma alpha-tocopherol concentrations, raised fourfold by supplementation, fell by 70% after the operation in the supplemented group and to negligible levels in the placebo group. There were no significant differences between the groups with respect to release of creatine kinase MB isoenzyme over 72 hours, nor in the reduction of the myocardial perfusion defect determined by thallium 201 uptake. Electrocardiography provided no evidence of a benefit from antioxidant supplementation. Thus the supplementation regimen prevented the depletion of the primary lipid soluble antioxidant in plasma, but provided no measurable reduction in myocardial injury after the operation.     

Identification and characterization of cathepsin B as the cellular MARCKS cleaving enzyme

The importance of regulating the cellular concentrations of the myristoylated alanine-rich C kinase substrate (MARCKS), a major cellular substrate of protein kinase C, is indicated by the fact that mice lacking MARCKS exhibit gross abnormalities of central nervous system development and die shortly after birth. We previously identified a novel means of regulating cellular MARCKS concentrations that involved a specific proteolytic cleavage of the protein and implicated a cysteine protease in this process (Spizz, G., and Blackshear, P. J. (1996) J. Biol. Chem. 271, 553-562). Here we show that p40, the carboxyl-terminal fragment resulting from this cleavage of MARCKS, was associated with the mitochondrial/lysosomal pellet fraction of human diploid fibroblasts and that its generation in cells was sensitive to treatment with NH4Cl. These data suggest the involvement of lysosomes in the generation and/or stability of p40. The MARCKS-cleaving enzyme (MCE) activity was peripherally associated with a 10,000 x g pellet fraction from bovine liver, and it co-purified with the activity and immunoreactivity of a lysosomal protease, cathepsin B. Cathepsin B catalyzed the generation of p40 from MARCKS in a cell-free system and behaved similarly to the MCE with respect to mutants of MARCKS previously shown to be poor substrates for the MCE. Treatment of fibroblasts with a cell-permeable, specific inhibitor of cathepsin B, CA074-Me, resulted in parallel time- and concentration-dependent inhibition of cathepsin B and MCE activity. Incubation of a synthetic MARCKS phosphorylation site domain peptide with purified cathepsin B resulted in cleavage of the peptide at sites consistent with preferred cathepsin B substrate sites. These data provide evidence for the identity of the MCE as cathepsin B and suggest that this cleavage most likely takes place within lysosomes, perhaps as a result of specific lysosomal targeting sequences within the MARCKS primary sequence. The data also suggest a direct interaction between MARCKS and cathepsin B in cells and leave open the possibility that MARCKS may in some way regulate the protease for which it is a substrate.