Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

Effect of swirl and number of swirler vanes on combustion characteristics of methane inverse diffusion flame

Journal of Mechanical Science and Technology - An experimental study is performed to explore the effect of swirl and number of swirler vanes on combustion characteristics of methane inverse...     

Synthesis of amino-cosubstituted polyorganophosphazenes and fabrication of their nanoparticles for anticancer drug delivery

The development of safe drug carriers is cardinal in cancer therapy, which can target the cancer cells and release the loaded drug on-demand without damaging the healthy cells of the body. In our work, we synthesized three different biodegradable polymers, poly[(ethyl aminobezoate) (ethyl glycinato) phosphazenes] (PABGPs), in different mole ratio of side groups. The successful synthesis of these PABGPs was confirmed by ¹H NMR, ³¹P NMR, FT-IR, and gel permeation chromatography. These PABGPs were fabricated into drug (camptothecin, CPT, a hydrophobic anticancer drug) loaded nanoparticles. These drug-loaded nanoparticles showed good drug release behaviors under normal physiological conditions (pH 7.4 and temperature 37°C). These PABGPs-based nanoparticles may find their application as effective drug carriers for cancer therapy.     

Randomized scheduling algorithms for high-aggregate bandwidth switches

The aggregate bandwidth of a switch is its port count multiplied by its operating line rate. We consider switches with high-aggregate bandwidths; for example, a 30-port switch operating at 40 Gb/s or a 1000-port switch operating at 1 Gb/s. Designing high-performance schedulers for such switches with input queues is a challenging problem for the following reasons: (1) high performance requires finding good matchings; (2) good matchings take time to find; and (3) in high-aggregate bandwidth switches there is either too little time (due to high line rates) or there is too much work to do (due to a high port count). We exploit the following features of the switching problem to devise simple-to-implement, high-performance schedulers for high-aggregate bandwidth switches: (1) the state of the switch (carried in the lengths of its queues) changes slowly with time, implying that heavy matchings will likely stay heavy over a period of time and (2) observing arriving packets will convey useful information about the state of the switch. The above features are exploited using hardware parallelism and randomization to yield three scheduling algorithms - APSARA, LAURA, and SERENA. These algorithms are shown to achieve 100% throughput and simulations show that their delay performance is quite close to that of the maximum weight matching, even when the traffic is correlated. We also consider the stability property of these algorithms under generic admissible traffic using the fluid-model technique. The main contribution of this paper is a suite of simple to implement, high-performance scheduling algorithms for input-queued switches. We exploit a novel operation, called MERGE, which combines the edges of two matchings to produce a heavier match, and study of the properties of this operation via simulations and theory. The stability proof of the randomized algorithms we present involves a derandomization procedure and uses methods which may have wider applicability.     

Duodenal erosions and ulcers in patients with pancreatobiliary obstruction

The authors compared in a controlled clinical study two groups of patients after a first renal transplantation treated by triple drug immunosuppressive therapy. In a group of 31 patients the triple combination comprised Sandimmune Neoral. In the control group there were 30 patients who received Sandimmune. No differences were found between the two groups as regards the effectiveness of this treatment and the authors did not confirm a lower incidence of rejections described in patients treated with Sandimmune Neoral. They confirmed, however, a lower interindividual variability of Cy-A levels assessed specifically in patients treated with Sandimmune Neoral.     

Occupational injuries among working adolescents in New York State

OBJECTIVE: To determine the number, distribution, determinants, and health consequences of occupational injuries among working adolescents in New York State. DESIGN: A retrospective, population-based analysis of New York State workers' compensation award data and the Annual Demographic File, a supplement to the US Bureau of the Census Current Population Survey. PARTICIPANTS: Adolescents, aged 14 through 17 years, who received workers' compensation awards for occupational injury from 1980 through 1987. MAIN OUTCOME MEASURES: (1) Numbers, types, and rates of occupational injuries in working adolescents by age, sex, industry, and occupation; (2) health consequences of injury, especially disability and death; and (3) secular trends in injury award rates. RESULTS: A total of 9656 adolescents were compensated for occupational injuries; 4201 compensated adolescents (43.5%) suffered permanent disability; 31 working adolescents died. The annual mean rate of compensated occupational injury was 28.2 per 10,000 adolescent workers. Rates were higher in males than in females and ranged from 8.2 per 10,000 in 14-year-old male workers to 46.8 per 10,000 in 17-year-old male workers. Highest rates by industry were seen in manufacturing (49.0/10,000 adolescent workers) and agriculture (46.2/10,000). Unskilled labor was the most dangerous occupation (52.3/10,000). CONCLUSION: Occupational injuries are a substantial and underrecognized contributor to the continuing epidemic of injury among adolescents.     

Sacrospinous colpopexy in the management of uterovaginal prolapse

The tet(M) genes were characterized from 84 isolates of 10 different bacterial species isolated from the periodontal pockets of 16 patients with periodontal disease. A 740 bp polymerase chain reaction product from the hypervariable region of the tet(M) structural gene was cleaved with the restriction enzymes AluI and HinfI. Three different restriction patterns were identified for each of the two enzymes. By DNA sequencing, using a direct solid-phase automated sequencing method, the isolates could be grouped into 3 different clusters of tet(M) subtypes. The internal DNA homology within each subtype was 98-100%; the homology between clusters was 89-94%. Two different subtypes were identified in 9 of 10 bacterial species, and the remaining species had 3 different subtypes. One of the subtypes (M3) was seen mainly in the anaerobic isolates. This subtype was different from all earlier sequenced structural tet(M) genes present in the Genbank. Most patients had two different subtypes of tet(M), and a third subtype was seen in the 3 patients who exhibited the greatest variety of tetracycline-resistant bacterial species. It appears that the presence of one subtype of the tet(M) gene within a patient or bacterial species does not prevent the acquisition of another subtype of the same gene. This study identified a new subtype of the tet(M) gene and grouped it into 3 distinct yet highly homologous genetic subtypes.     

Efficient random subcloning of DNA sheared in a recirculating point-sink flow system

Based on a high-performance liquid chromatographic pump, we have built a device that allows recirculation of DNA through a 63-microm orifice with ensuing fractionation to a minimum fragment size of approximately 300 base pairs. Residence time of the DNA fragments in the converging flow created by a sudden contraction was found to be sufficiently long to allow extension of the DNA molecules into a highly extended conformation and, hence, breakage to occur at midpoint. In most instances, 30 passages sufficed to obtain a narrow size distribution, with >90% of the fragments lying within a 2-fold size distribution. The shear rate required to achieve breakage was found to be inversely proportional to the 1.0 power of the molecular weight. Compared with a restriction digest, up to 40% of all fragments could be cloned directly, with only marginal improvements in cloning efficiency having been observed upon prior end repair with Klenow, T4 polymerase or T4 polynucleotide kinase. Sequencing revealed a fairly random distribution of the fragments.