Mixed-Metal MOF-74 Templated Catalysts for Efficient Carbon Dioxide Capture and Methanation

The vast chemical and structural tunability of metal–organic frameworks (MOFs) are beginning to be harnessed as functional supports for catalytic nanoparticles spanning a range of applications. However, a lack of straightforward methods for producing nanoparticle-encapsulated MOFs as efficient heterogeneous catalysts limits their usage. Herein, a mixed-metal MOF, NiMg-MOF-74, is utilized as a template to disperse small Ni nanoclusters throughout the parent MOF. By exploiting the difference in Ni O and Mg O coordination bond strength, Ni²⁺ is selectively reduced to form highly dispersed Ni nanoclusters constrained by the parent MOF pore diameter, while Mg²⁺ remains coordinated in the framework. By varying the ratio of Ni to Mg in the parent MOF, accessible surface area and crystallinity can be tuned upon thermal treatment, influencing CO₂ adsorption capacity and hydrogenation selectivity. The resulting Ni nanoclusters prove to be an active catalyst for CO₂ methanation and are examined using extended X-ray absorption fine structure and X-ray photoelectron spectroscopy. By preserving a segment of the Mg²⁺-containing MOF framework, the composite system retains a portion of its CO₂ adsorption capacity while continuing to deliver catalytic activity. The approach is thus critical for designing materials that can bridge the gap between carbon capture and CO₂ utilization.     

Recurrent Epstein-Barr virus-associated lesions in organ transplant recipients

This paper discusses the problem of violence and its expression upon mortality due to external causes. A few indicators are offered, which have been worked upon it to emphasise the importance of the theme. In a general way, the study demonstrates violent death has had its magnitude increased along the years, not only throughout Latin America but also in Brazil and in Santa Catarina.     

The Clausius inequality corrected for heat transfer involving radiation

The objective of this paper is to prove that the Clausius inequality must be re-stated to have general applicability for heat transfer involving radiative fluxes. The integrand (đQ/T) of the Clausius expression applies to heat conduction and convection, but does not hold for most radiative transfer scenarios, with the exception of reversible infinitesimal net blackbody radiation transfer. In other cases involving radiative transfer, the equality holds for a cycle even though irreversible heat addition by radiative transfer occurs. This is without the erroneous presumption of entropy destruction anywhere in the cycle. Thus, the Clausius inequality indicates reversibility for a cycle that includes an irreversible process. Further, in some radiative cases the quantity đQ/T, where T is the boundary temperature, is not the entropy transfer at the system boundary, and in fact, primarily represents entropy production within the system. It is also clear that in another case considered, the quantity đQ/T had no physical meaning whatsoever. Consequently, the Clausius expression has been re-stated so that it is applicable to cycles with processes involving any form of heat transfer. A new integrand (đQ_cc/T + đS_Net,Rad) is presented, allowing the Clausius inequality to generally apply to all heat transfer scenarios. The work in this paper emphasizes the need to re-state other fundamental equations allowing applicability to all heat transfer processes, and draws attention to the unique character of radiative entropy calculations.     

Effect of process distillation on mutagenicity and cell-transformation activity of solvent-refined,coal-derived liquids

Blended SRC-II process streams, representing a full boiling range distillate material, were fractionally distilled into non-overlapping 50 °F cuts with boiling points between 300 and 850 °F. Another set of 18 distillate cuts were obtained with boiling points ranging between 138 and 1055 °F. Distillate cuts were assayed for mutagenic activity using the histidine reversion assay with Salmonella typhimurium strains TA98, TA100, TA1535 and TA1537, as well as for mammalian-cell transformation activity in the Syrian hamster embryo test, and DNA damage in the prophage induction assay. Samples were also separated into chemical class fractions by alumina column chromatography and analysed by high resolution gas chromatography so that the chemical composition of the cuts could be related to their relative activity in the different assays. In the mammalian cell transformation and microbial mutagenicity assays, significant activity was found almost exclusively in distillate cuts with components boiling > 700 °F, with the highest activity in the transformation assay observed for cuts > 800 °F. All of the distillate cuts showed increased levels of DNA damage as expressed by lambda prophage induction in Escherichia coli 8177. However, the greatest activity was associated with distillate cuts with boiling points in the 800 °F + range. Chemical analysis of the 50 °F distillate cuts showed a variety of polycyclic aromatic hydrocarbons (PAH) and amino-PAH compounds to be present in the distillate cuts boiling > 700 °F and essentially absent from cuts boiling < 700 °F. The sample set of non-overlapping (50 °F) cuts were reblended according to the proportions of each cut found in the original blend material. These reblended composites were then assayed to compare their activity with that predicted from the activities of the component distillate cuts. The reblending experiments indicated the microbial mutagenicity response was essentially additive. Mammalian cell transformation activities were non-additive, indicating a compositional effect on the expression of transforming agents in the complex mixture.     

Entities,identities, identifiers and credentials — what does it all mean?

This paper looks at the concepts of entities, identities, identifiers and credentials, their definitions, and how they combine to authenticate an identity to an account, or function, within a service. Credentials can be divided into several different types on the basis of their use, origin and characteristics. In particular, types such as composite, dynamic and derived credentials will be considered, and their applicability within an identity management system. Each credential must be managed through its entire life cycle from initial registration, general use and suspension, to deletion. The notion of public (i.e. freely distributable) and private (i.e. known only to you) aspects of a credential is explored. The bindings, by trusted third parties, of identifiers and public credentials into permits and instruments of proof is explained along with the convenience, but greater exposure, of local information. Several scenarios are analysed in terms of how different types of credentials are employed during the authentication process.     

Ni catalyst promotion of a Cis-selective Pd catalyst for canola oil hydrogenation

A Ni catalyst was added to a cis-selective Pd catalyst in an attempt to further improve the Pd catalyst's cis-selectivity and activity for canola oil hydrogenation. The system was tested under reaction conditions known to be suitable for cis-selective hydrogenation with the Pd catalyst (50 ppm Pd, 70 °C, and 5.2 MPa). Although inactive on its own under these conditions, the addition of 100 ppm Ni increased the hydrogenation activity (from 2.12 to 2.49 10⁻² min⁻¹). Further addition of Ni up to 1000 ppm resulted in no further improvements in activity. The trans isomer contents of the oils hydrogenated with Pd and the Pd/Ni systems were similar. The level of conjugated dienes decreased rapidly during hydrogenation with both Pd alone and with the Pd/Ni combination and no changes in conjugation were detected in the presence of the Ni catalyst alone. The increased activity of the Pd/Ni system over Pd alone was attributed to adsorption of catalyst poisons from the oil by Ni.     

Variables affecting results of sodium chloride tolerance test for identification of rapidly growing mycobacteria

The sodium chloride tolerance test is often used in the identification of rapidly growing mycobacteria, particularly for distinguishing between Mycobacterium abscessus and Mycobacterium chelonae. This test, however, is frequently unreliable for the identification of some species. In this study we examined the following variables: medium manufacturer, inoculum concentration, and atmosphere and temperature of incubation. Results show that reliability is improved if the test and control slants are inoculated with an organism suspension spectrophotometrically equal to a 1 McFarland standard. Slants should be incubated at 35 degrees C in ambient air and checked weekly for 4 weeks. Growth on control slants should be critically evaluated to determine the adequacy of the inoculum; colonies should number greater than 50. Salt-containing media should be examined carefully to detect pinpoint or tiny colonies, and colonies should number greater than 50 for a positive reaction. Concurrent use of a citrate slant may be helpful for distinguishing between M. abscessus and M. chelonae. Molecular methodologies are probably the most reliable means for the identification of rapidly growing mycobacteria and should be used, if possible, when unequivocal species identification is of particular importance.     

Mutational analysis of the pea phytochrome A chromophore pocket: chromophore assembly with apophytochrome A and photoreversibility

Ten site-specific mutants of pea apophytochrome A were expressed in Saccharomyces cerevisiae and analyzed for chromophore assembly with apoprotein and photoreversible absorbance changes. The mutants constitute two specific changes for each of five conserved amino acid residues located in the microenvironment of the chromophore attachment residue, which is Cys-323 in pea phytochrome A. All mutant apophytochromes were autocatalytically able to covalently attach phycocyanobilin, indicating that there were no major structural perturbations in the apoproteins. However, the rate of chromophore ligation varied significantly among the mutants. Spectrally, the mutant holophytochromes are of three types: mutant phytochromes that are indistinguishable from the wild-type adduct, mutants with blue-shifted Pr and Pfr absorption maxima compared to the wild-type adduct, and mutants that are not photoreversible. From an analysis of the results, we concluded that the residues Asp-309, Arg-318, His-321, and Gln-326 are probably not catalytically involved in the chromophore ligation reaction, but some residues may play significant structural and stereochemical roles. Arg-318 might anchor the chromophore, as has been suggested [Partis, M. D., & Grimm, R. (1990) Z. Naturforsch, 45c, 987-998; Parker, W., et al. (1993) Bioconjugate Chem. (in press)]. The conserved Gln-326, three residues downstream from the chromophore attachment site, is not electrostatically critical for the spectral integrity and photoreversibility of phytochrome, but this residue is sterically important to the lyase activity. It appears that the role of the five amino acid residues in the N- and C-terminal vicinities of the chromophore binding Cys-323 is structural rather than catalytic for the ligation reaction.     

B7 blockade prevents activation-induced cell death of thymocytes

Although both B7 and its counter-receptor CD28 are expressed in the thymus, the role of B7 in thymic selection is not clear. We investigated the role of B7 in intrathymic deletion of antigen-specific T cells using a TCR transgenic model specific for antigen ovalbumin (OVA) and H-2Ad. Intraperitoneal injection of OVA induced apoptosis of thymocytes and drastic reduction of thymocyte numbers. This was significantly inhibited by co-injection of CTLA-4-Ig which blocks B7 co-stimulation. Deletion of T cells in the thymus following i.p. injection of OVA was associated with T cell pre-activation as demonstrated by T cell proliferation and cytokine production. Injection of CTLA-4-Ig blocked all these activation events and rescued thymocytes from activation-induced cell death. These results demonstrate that B7 is required for the activation-induced cell death of MHC class II-restricted thymocytes in vivo.     

The two steps of group II intron self-splicing are mechanistically distinguishable

The two transesterification reactions catalyzed by self-splicing group II introns take place in either two active sites or two conformations of a single active site involving rearrangements of the positions of the reacting groups. We have investigated the effects on the rates of the chemical steps of the two reactions due to sulfur substitution of nonbridging oxygens at both the 5' and 3' splice sites as well as the deoxyribose substitution of the ribose 2' hydroxyl group at the 5' splice site. The data suggest that the two active sites differ in their interactions with several of these groups. Specifically, sulfur substitution of the pro-Sp nonbridging oxygen at the 5' splice site reduces the chemical rate of the step one branching reaction by at least 250-fold, whereas substitution of the pro-Sp oxygen at the 3' splice site has only a 4.5-fold effect on the chemical rate of step two. Previous work demonstrated that the Rp phosphorothioate substitutions at both the 5' and 3' splice sites reduced the rate of both steps of splicing to an undetectable level. These results suggest that either two distinct active sites catalyze the two steps or that more significant alterations must be made in a single bifunctional active site to accommodate the two different reactions.