Design of an antibacterial gelatin based on a covalent protein–protein coupling

An antibacterial peptide (AMP), i.e., nisin, was covalently bound to gelatin through a protein–protein coupling. Various reaction conditions were tested to study and optimize parameters of grafting e.g., orientation and density of AMP, which could impact the final antibacterial activity of the modified biopolymer. Modification was investigated by Fourier transform infrared (FT‐IR) spectroscopy and zeta potential. The antibacterial activity of the nisin‐enriched gelatin was evaluated against two staphylococci bacterial strains, i.e., Staphylococus epidermidis and Staphylococcus aureus. A higher activity was found for gelatin modified at pH = 7.4 revealing an influence of the nisin orientation on the protein antibacterial property. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41825.     

Studies of Work ‘in the Wild’

Computer Supported Cooperative Work (CSCW) -     

Determination du coefficient d'extinction molaire de OH− dans les verres fluores a base de metaux lourds

The extinction coefficient ? at 2.9 μm for OH in fluoride glasses is measured by determining the amount of HF evolved during heating of the glass under steam and the corresponding intensity of the OH absorption band. This coefficient is respectively equal to 31 litre mole^?1 cm^?1 for BTYbZ glass (15 BaF₂ - 29 ThF₄ - 28 YbF₃ - 28 ZnF₂) and 19.5 litre mole^?1 cm^?1 for BALLA glass (34 BaF₂ - 57 ZrF₄ - 4 AlF₃ - 5 LaF₃).     

Preparation and Characterization of Inorganic Fluorides—Fullerenes Compounds

Reaction of metallic fluorides: WF₆ TaF₅, NbF₅ and TiF₄ with C₆₀/C₇₀ extract was performed at appropriate temperatures. M0F₅ and BF₃ fluorides do not react. Chemical formulas based on mass uptake show MF_n/C₆₀ ratios up to 2.00. Compounds were analysed by means of X-ray diffraction, FT-IR and NMR spectroscopies. The presence of neutral fluorides and associated anionic species is put forward and it is shown that MF_n compounds do not act as fluorination agents. Electrical conductivity measurements are also presented.     

Polarization control in a vertical cavity surface emitting laser submitted to optical feedback

We study experimentally and theoretically two polarization effects in a vertical cavity surface emitting laser submitted to optical feedback. In a first experiment, we obtain flips between two linearly polarized laser modes up to a frequency of 50 MHz using an external cavity with a polarizer. In a second experiment, polarization self modulation is demonstrated up to a frequency of 2.6 GHz, using a quarter wave plate instead. Numerical calculations, based on a four levels model for the active medium, show a good agreement with the experiments.     

Perturbation of an elementary logic system submitted to the effects induced by a perturbing sine wave

Data transmission networks and systems are often subject to perturbations due to the fact that (low level) data signals are surrounded by perturbing electromagnetic fields. This paper presents and analyses information perturbing mechanisms. The authors examine data streams transmitted by an elementary system which represents the basis of any electronic device. We show the influence of technological families of cmos circuits and present a test method and bench to investigate the sensitivity of devices under test by means of statistical parameters.     

Reactivity of steam in exhaust gas catalysis III. Steam and oxygen/steam conversions of propane on a Pd/Al2O3 catalyst

A 1% Pd catalyst (38% dispersion) was prepared by impregnating a γ-alumina with palladium acetylacetonate dissolved in acetone. The behaviour of this catalyst in oxidation and steam reforming (SR) of propane was investigated. Temperature-programmed reactions of C₃H₈ with O₂ or with O₂ + H₂O were carried out with different stoichiometric ratios S(S =[O₂]/5[C₃H₈]). The conversion profiles of C₃H₈ for the reaction carried out in substoichiometry of O₂ (S < 1) showed two discrete domains of conversion: oxidation at temperatures below 350°C and SR at temperatures above 350°C. The presence of steam in the inlet gases is not necessary for SR to occur: there is sufficient water produced in the oxidation to form H₂ and carbon oxides by this reaction. Contrary to what was observed with Pt, an apparent deactivation between 310 and 385°C could be observed with Pd in oxidation. This is due to a reduction of PdO_x into Pd⁰, which is much less active than the oxide in propane oxidation. Steam added to the reactants inhibits oxidation while it prevents the reduction of PdO_x into Pd⁰. Compared to Pt and to Rh, Pd has a higher thermal resistance: no deactivation occurred after treatment up to 700°C and limited deactivation after treatment up to 900°C, provided that the catalyst is maintained in an oxygen-rich atmosphere during the cooling.