The carcinogenicity of environmental tobacco smoke

Male strain A/J mice were exposed for 6 h a day, 5 days a week to environmental tobacco smoke (ETS) generated from Kentucky 1R4F reference cigarettes. Chamber concentrations were 87 mg/m3 of total suspended particulate matter (TSP), 246 p.p.m. of CO and 16 mg/m3 of nicotine. After 5 months, 33% of the ETS exposed and 11% of the control animals had one or several lung tumors; the difference was statistically not significant. A second group of animals exposed for 5 months to ETS was allowed to recover for another 4 months in filtered air. When they were killed, 85% of the ETS animals had lung tumors (average number per lung: 1.4 +/- 0.2), whereas in the control group 38% had lung tumors (average number of lung tumors in all animals 0.5 +/- 0.2). The differences in tumor incidence and multiplicity were statistically significant. More than 80% of all tumors were adenomas, the rest adenocarcinomas. When animals were pretreated with a carcinogen, lung tumor multiplicity was lower in the ETS exposed animals after 5 months compared with controls injected with a carcinogen and kept in air. However, after an additional 4 month recovery period in air, lung tumor multiplicities were the same in ETS plus carcinogen exposed mice as in carcinogen-treated air-exposed controls. Histopathologic and morphometric analysis of the lung tissue failed to reveal any differences between ETS exposed and control animals. However, immediately after ETS exposure, immunohistochemistry revealed increased staining for CYP1A1 in airway epithelia and lung parenchyma; following recovery in air, the staining disappeared again. Analysis of cell kinetics showed an initial burst of increased DNA synthesis in the epithelial cells of the airways and a smaller early positive response in the parenchyma. Feeding of butylated hydroxytoluene during ETS exposure did not modulate lung tumor development. It was concluded that ETS is a pulmonary carcinogen in strain A/J mice.     

Does histology influence outcome in childhood Hodgkin's disease? Results from the United Kingdom Children's Cancer Study Group

PURPOSE: Histology has been identified as an important prognostic factor in Hodgkin's disease (HD) in adults. Information regarding the impact of histology on outcome in childhood HD is scarce. This study determines the effect of histology on the overall survival (OS) or progression-free survival (PFS) in a national series of children treated in a standardized manner. PATIENTS AND METHODS: The results of treatment of 331 assessable patients, treated between January 1, 1982 and June 30, 1992, in the United Kingdom Children's Cancer Study Group (UKCCSG) Hodgkin's study I were reviewed to evaluate OS, PFS, and deaths according to stage and histology. Treatment was either involved-field radiation alone (stage IA) or chlorambucil, vinblastine, procarbazine, and prednisolone (ChlVPP) chemotherapy with or without mediastinal radiation. All were clinically staged at diagnosis. RESULTS: Nodular sclerosing (NS) HD was the most common histologic subtype (155 of 331 patients [47%]) and was uniformly distributed through all stages. Lymphocyte-depletion (LD) HD was extremely uncommon (< 1%). Mixed-cellularity (MC) HD had the highest relapse rate, but this was only significant (P < .05) in stage I patients who received local irradiation alone. There was no other statistically significant difference in OS and PFS between the various histologic subtypes. Multivariate analysis for PFS and OS confirmed that stage was the most important prognostic factor and that histology did not have an effect after stratification by stage. CONCLUSION: This study demonstrates that with effective multiagent chemotherapy, histologic subtype does not influence outcome. The high relapse rates in stage I MC subtype indicates that MC HD is biologically aggressive and systemic treatment with or without local irradiation may be indicated. The high relapse rate in stage IV patients appeared to be independent of histology.     

Abrupt (< 1 day), acute (< 1 week), and early (< 1 month) vessel closure at the angioplasty site. Morphologic observations and causes of closure in 130 necropsy patients undergoing coronary angioplasty

While abundant clinical and angiographic data are available regarding features of acute or abrupt closure at the site of balloon angioplasty, little morphologic information is available. This study discusses morphologic-histologic causes for acute closure after angioplasty in 130 necropsy patients. Intimal-medial flaps, elastic recoil, and primary thrombosis were the three leading morphologic causes for closure. Data were subdivided into time categories: abrupt (< 1 day), acute (< 1 week), and early (< 1 month). Intimal-medial flaps remained the most common cause for angioplasty closure despite time from angioplasty to documented occlusion. Morphologic recognition of types and frequencies of angioplasty closure are discussed, and specific mechanical, pharmacologic, or combined treatments are reviewed.     

The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)

Direct laser deposition (DLD) is an additive manufacturing process that builds up a part layer-by-layer by fusing metal powder to a solid substrate. A coaxial laser and powder delivery head is commonly used, and here a critical process variable is the standoff distance between the nozzle and the material deposition point. This contribution investigates the role of this variable and the effect that it has on the final part geometry. The experimental results show that good layer consistency can, in fact, be obtained with no movement of the substrate between layers for more than 20 layers, or 10 mm under tested conditions, and that poorer results are obtained by regular movement of the substrate by a badly chosen constant amount. A theoretical analysis of the situation establishes a method to estimate melt pool size using an analytically calculated temperature near the heat source. Based on this, simple heat and mass flow models are established to allow some of the results to be explained.     

Centriacinar remodeling and sustained procollagen gene expression after exposure to ozone and nitrogen dioxide

Sprague-Dawley rats were exposed to 0.8 ppm ozone (O3), to 14.4 ppm nitrogen dioxide (NO2), or to both gases simultaneously for 6 h per day for up to 90 d. The extent of histopathologic changes within the central acinus of the lungs was compared after 7 or 78 to 90 d of exposure using morphometric analysis by placement of concentric arcs radiating outward from a single reference point at the level of the bronchiole- alveolar duct junction. Lesions in the lungs of rats exposed to the mixture of gases extended approximately twice as far into the acinus as in those exposed to each individual gas. The extent of tissue involvement was the same at 78 to 90 d as noted at 7 d in all exposure groups. At the end of exposure, in situ hybridization for procollagen types I and III demonstrated high levels of messenger RNA within central acini in the lungs of animals exposed to the combination of O3 and NO2. In contrast, animals exposed to each individual gas had a similar pattern of message expression compared with that seen in control animals, although centriacinar histologic changes were still significantly different from control animals. We conclude that the progressive pulmonary fibrosis that occurs in rats exposed to the combination of O3 and NO2 is due to sustained, elevated expression of the genes for procollagen types I and III. This effect at the gene level is correlated with the more severe histologic lesions seen in animals exposed to both O3 and NO2 compared with those exposed to each individual gas. In contrast, the sustained expression of the procollagen genes is not associated with a shift in the distribution of the lesions because the area of change in each group after 7 d of exposure was the same as after 78 to 90 d of exposure.     

Mental health consultation and psychology internship training.

Psychology interns trained in American Psychological Association-approved internship programs are expected to demonstrate an intermediate to advanced level of skill in mental health consultation. Where do students learn the skills to consult with colleagues, other professionals, or the public? This article describes a 1-year, 2-phase training experience in consultation at a university mental health service. The program is theory based, sequential, and builds over the course of the internship. Discussion underscores the positive impact of the training and reviews potential problems that may emerge. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The carcinogenic potential of the gas phase of environmental tobacco smoke

Female strain A/J mice were exposed to unfiltered or HEPA-filtered environmental tobacco smoke (ETS). Total suspended particulates (TSP) in the full smoke exposure chamber was 78.5 mg/m3 and in the filtered smoke chamber 0.1 mg/m3; nicotine concentrations in the full and filtered smoke chamber were 13.4 and 3.1 mg/m3, respectively. Animals exposed to filtered ETS (6 h a day, 5 days a week) and killed after 5 months had a higher lung tumor incidence and multiplicity than controls maintained in filtered air, although the differences were not statistically significant. Animals exposed to filtered and full ETS and allowed to recover in air for 4 months had an average of 1.2 +/- 0.3 tumors per lung and 1.3 +/- 0.3 tumors per lung, respectively. Air exposed control animals had an average tumor multiplicity 0.5 +/- 0.1 tumors per lung. Increased immunostaining for CYP 1A1 was not evident in the lung of animals exposed to filtered smoke. Based on the chamber concentrations of selected nitrosamines and polycyclic aromatic hydrocarbons, the possible maximum uptakes by the mice of NNK, NNN and benzo[a]pyrene during the 5 months exposure period were three to six orders of magnitude below doses reported in the literature to produce 1 lung tumor in strain A/J mice. It was concluded that the gas phase of ETS is as carcinogenic as is full ETS. The carcinogenicity of the gas phase may be due to some as yet unidentified, yet highly potent carcinogens or by placing a substantial, possibly free radical-mediated oxidative stress on the lung.     

Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

Challenges in dissimilar materials welding are the differences of physical and chemical properties between welding materials and the formation of intermetallic brittle phases resulting in the degradation of mechanical properties of welds. However, dissimilar materials welding is increasingly demanded from the industry as it can effectively reduce material costs and improve the design. In aerospace applications, Ti-6Al-4V titanium alloy and Inconel 718 nickel alloy have been widely used because of their superior corrosion resistance and mechanical properties. In this study, a single-mode continuous-wave fibre laser was used in butt welding of Ti-6Al-4V to Inconel 718. Investigations including metallurgical and mechanical examinations were carried out by means of varying processing parameters, such as laser power, welding speed and the laser beam offset position from the interface of the metals. Simple analytical modelling analysis was undertaken to explain the phenomena that occurred in this process. Results showed that the formation of intermetallic brittle phases and welding defects could be effectively restricted at welding conditions produced by the combination of higher laser power, higher welding speed and shifting the laser beam from the interface to the Inconel 718 alloy side. The amount of heat input and position of laser beam to improve the Ti-6Al-4V/Inconel 718 weld quality are suggested.