Colloidal Synthesis of Hollow Cobalt Sulfide Nanocrystals

Formation of cobalt sulfide hollow nanocrystals through a mechanism similar to the Kirkendall Effect has been investigated in detail. It is found that performing the reaction at > 120 °C leads to fast formation of a single void inside each shell, whereas at room temperature multiple voids are formed within each shell, which can be attributed to strongly temperature‐dependent diffusivities for vacancies. The void formation process is dominated by outward diffusion of cobalt cations; still, the occurrence of significant inward transport of sulfur anions can be inferred as the final voids are smaller in diameter than the original cobalt nanocrystals. Comparison of volume distributions for initial and final nanostructures indicates excess apparent volume in shells, implying significant porosity and/or a defective structure. Indirect evidence for fracture of shells during growth at lower temperatures was observed in shell‐size statistics and transmission electron microscopy images of as‐grown shells. An idealized model of the diffusional process imposes two minimal requirements on material parameters for shell growth to be obtainable within a specific synthetic system.     

Optimal space-time constellations from groups

We consider the design of space-time constellations based on group codes for fading channels with multiple transmit and receive antennas. These codes can be viewed as multiantenna extensions of phase-shift keying (PSK), in the sense that all codewords have equal energy, all are rotations of a fixed codeword, and there is a simple differential transmission rule that allows data to be sent without channel estimates at the transmitter or receiver. For coherent detection, we show that all optimal full-rank space-time group codes are unitary (each code matrix has equal-energy, orthogonal rows). This leads to a simpler code design criterion and suggests that unitary codes may play an important role in coherent as well as noncoherent communication. For any number of transmit antennas t, we then use the design criterion to characterize all full-rank unitary space-time group codes of minimum block length (also t) which have 2/sup p/ codewords. These results allow us to characterize all optimal 2/sup p/-ary unitary group codes with square code matrices. This restricted class of block codes matches the class proposed for differential modulation by Hughes (see IEEE Trans. Inform. Theory, vol.46, p.2567-78, Nov. 2000), and by Hochwald and Sweldens (see IEEE Trans. Commun., vol.48, p.2041-2052, Dec. 2000).     

Detection of four species of Borrelia burgdorferi sensu lato in Ixodes ricinus ticks collected from roe deer (Capreolus capreolus) in The Netherlands

Epiglottic disruption is an uncommon injury usually associated with significant supraglottic trauma. This injury may be overlooked because of the difficulty in examining the larynx or other associated severe injuries. We present two cases of clinically unsuspected epiglottic disruption that were first seen on MR images of the neck.     

National survey of mammographic facilities in 1985, 1988, and 1992

PURPOSE: To determine trends in mammography in the United States. MATERIALS AND METHODS: A sample of mammographic facilities was selected for each year of the Nationwide Evaluation of X-ray Trends. The same protocol was followed for the 1985, 1988, and 1992 surveys. Data were collected with use of the same imaging phantom for all three surveys and also with a different phantom in the 1988 and 1992 surveys. RESULTS: Of the 356 facilities surveyed in 1992, 59% claimed to be in compliance with the Health Care Financing Administration (HCFA) mammography requirements, 42% were accredited by the American College of Radiology (ACR), and 23% did not hold credentials from either the HCFA or the ACR. Since 1985, there has been a 34% improvement in acceptable phantom image quality score and a 20% decrease in the mean glandular dose. CONCLUSION: Mammography as practiced today is essentially a screen-film technique. Mammographic phantom image quality has improved considerably. The overall mean glandular dose has decreased primarily because of the elimination of xeroradiography.     

Secobarbital in humans discriminating triazolam under two-response and novel-response procedures

The percentage of long-term survivors after intensive chemotherapy and the outcome of MDS patients who achieve partial remission (PR) with intensive chemotherapy (IC) are not known. Between 1981 and 1996 we treated 99 patients with de novo MDS who had high-risk MDS or progression to AML, with IC. 41 (41%) achieved CR, 16 (16%) achieved partial remission (PR), 26 (26%) had failure, and 16 (16%) died in aplasia. Eight of the patients who achieved CR were autografted, three were allografted and the remaining cases received moderate consolidation chemotherapy. After IC, the 16 PR patients fulfilled the criteria for RA in 15 cases and CMML in one case. Median PR duration was 17 months, and three PR were > 3 years (39, 50+, 82+ months). Median actuarial survival of patients who achieved PR and CR was 18 months and 20 months from the onset of IC, respectively (difference not significant). Of the 71 patients treated before 1993, with sufficient follow-up, 10 (14%) had survived > 4 years (long-term survivors). Four of them were alive in first CR after 49+ to 110+ months and probably cured, two were alive in PR after 50+ and 82+ months and four had died after 49-78 months. Long-term survivors were characterized by a significantly higher incidence of RAEB-T at diagnosis, and with normal or favourable cytogenetic findings. In patients with RAEB-T at diagnosis included before 1993, 8/23 (35%) cases who had no unfavourable karyotype had survived > 4 years. Our findings suggest that MDS patients who achieve PR with IC, and not only those who achieve CR, can benefit from this type of treatment. The percentage of long-term survivors remains low, however, and is almost restricted to patients with RAEB-T at diagnosis and no unfavourable karyotype.     

Continuous measurement of cardiac output by the Fick principle in infants and children: comparison with the thermodilution method

OBJECTIVE: To compare a system that continuously monitors cardiac output by the Fick principle with measurements by the thermodilution technique in pediatric patients. DESIGN: Prospective direct comparison of the above two techniques. SETTING: Pediatric intensive care unit of a university hospital. PATIENTS: 25 infants and children, aged 1 week to 17 years (median 10 months), who had undergone open heart surgery were studied. Only patients without an endotracheal tube leak and without a residual shunt were included. METHODS: The system based on the Fick principle uses measurements of oxygen consumption taken by a metabolic monitor and of arterial and mixed venous oxygen saturation taken by pulse- and fiberoptic oximetry to calculate cardiac output every 20s. INTERVENTIONS: In every patient one pair of measurements was taken. Continuous Fick and thermodilution cardiac output measurements were performed simultaneously, with the examiners remaining ignorant of the results of the other method. RESULTS: Cardiac output measurements ranged from 0.21 to 4.55 l/min. A good correlation coefficient was found: r2 = 0.98; P < 0.001; SEE = 0.41 l/min. The bias is absolute values and in percent of average cardiac output was - 0.05 l/min or - 4.4% with a precision of 0.32 l/min or 21.3% at 2 SD, respectively. The difference was most marked in a neonate with low cardiac output. CONCLUSION: Continuous measurement of cardiac output by the Fick principle offers a convenient method for the hemodynamic monitoring of unstable infants and children.     

Outgassing from stainless steel and the effects of the gauges

The true outgassing from surfaces is often masked by the production of gases and pumping within the measuring gauge. Quadrupole mass analysers have been used to measure the outgassing from carefully prepared samples of stainless steel. By using an isolation pressure rise technique coupled to non-evaporable getter pumping, the problem of production of methane by the gauge is overcome and it has been possible to measure the outgassing of methane to very low levels. The specific outgassing rate of methane from 316 L stainless steel is found to be ?5×10⁻²² mbar l s⁻¹ cm⁻². The outgassing of the other gases has been measured using several gauges. The specific outgassing of hydrogen is found to be 4.5×10⁻¹⁵ mbar l s⁻¹ cm⁻² and the total of all other gasses amounted to no more than 10% of this figure. Although the measurements of the other gases are more ambiguous than those for methane, it is concluded that, in all probability, only hydrogen is outgassed from stainless steel.