Dynamical modelling of an activated sludge system of a petrochemical plant operating at high temperatures.

The Mexican petrochemical industry, Morelos S.A. de C.V., is one of the biggest and more important petroleum industries in Mexico and Latin America. It has an activated sludge system to treat its wastewater flow, which is approximately 7,000 m3/d. The wastewater contains volatile organic carbon substances classified as toxics. The old surface aeration system was changed for fine bubble diffusers; however, one major drawback of the new aeration system is that the temperature in the bioreactor has increased due to the compression of the air, which at the compressor exit reaches 85 degrees C. This effect results in the temperature in the bioreactor attaining 32 degrees C during the fall, whereas in the spring and summer, the bioreactor temperature reaches higher values than 40 degrees C. The high temperatures reduce the microorganism activity and cause a higher volatilisation rate of volatile compounds, among other effects, which affect the performance of the biological treatment. This work was performed to obtain a better modelling of the wastewater treatment from the petrochemical industry. The model describes the effect of the temperature on the performance of the biological treatment. The model was obtained from tests that were carried out in laboratory reactors with 14 L capacity, which were operated at different temperatures (from 30 to 45 degrees C), with the same wastewater and conditions as the actual system.     

An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Amplified primer extension assay for psoralen photoproducts provides a sensitive assay for a (CG)6TA(CG)2(TG)8 Z-DNA torsionally tuned probe: preferential psoralen photobinding to one strand of a B-Z junction

An amplified primer extension assay has been developed for quantitatively mapping the sites of psoralen photoaddition to DNA. This assay was applied to a torsionally tuned Z-DNA-probe that was specifically designed for the primer extension assay. The torsionally tuned Z-DNA forming sequence, (CG)6TA(CG)2(TG)8, forms Z-DNA in vitro at negative superhelical density: sigma = -0.05. The internal 5'-TA dinucleotide was reactive to psoralen when it existed as B-DNA. Upon the formation of Z-DNA, the internal 5'-TA no longer photobound psoralen. The torsionally tuned sequence was synthesized as an EcoRI fragment such that, when Z-DNA formed, the central 5'-AATT of the EcoRI sites was part of the B-Z junctions. The 5'-AATT sequence was not reactive with psoralen when it existed as B-DNA. When the 5'-AATT sequence existed as a B-Z junction, one strand of each junction became hyperreactive to psoralen. The TT directly 5' to the B-DNA-Z-DNA junction photobound psoralen in a strand-specific fashion. Quantitation of the relative rate of psoralen photobinding to the internal 5'-TA and the 5'-AATT at the B-Z junctions provides relationships that are characteristic of the level of supercoiling in DNA.     

Fetus-in-fetu with malignant recurrence

Fetus-in-fetu is an unusual condition in which a vertebrate fetus is enclosed within the abdomen of another fetus. These occurrences are usually benign. This report describes an instance of malignant recurrence after resection of a fetus-in-fetu.     

The carcinogenicity of environmental tobacco smoke

Male strain A/J mice were exposed for 6 h a day, 5 days a week to environmental tobacco smoke (ETS) generated from Kentucky 1R4F reference cigarettes. Chamber concentrations were 87 mg/m3 of total suspended particulate matter (TSP), 246 p.p.m. of CO and 16 mg/m3 of nicotine. After 5 months, 33% of the ETS exposed and 11% of the control animals had one or several lung tumors; the difference was statistically not significant. A second group of animals exposed for 5 months to ETS was allowed to recover for another 4 months in filtered air. When they were killed, 85% of the ETS animals had lung tumors (average number per lung: 1.4 +/- 0.2), whereas in the control group 38% had lung tumors (average number of lung tumors in all animals 0.5 +/- 0.2). The differences in tumor incidence and multiplicity were statistically significant. More than 80% of all tumors were adenomas, the rest adenocarcinomas. When animals were pretreated with a carcinogen, lung tumor multiplicity was lower in the ETS exposed animals after 5 months compared with controls injected with a carcinogen and kept in air. However, after an additional 4 month recovery period in air, lung tumor multiplicities were the same in ETS plus carcinogen exposed mice as in carcinogen-treated air-exposed controls. Histopathologic and morphometric analysis of the lung tissue failed to reveal any differences between ETS exposed and control animals. However, immediately after ETS exposure, immunohistochemistry revealed increased staining for CYP1A1 in airway epithelia and lung parenchyma; following recovery in air, the staining disappeared again. Analysis of cell kinetics showed an initial burst of increased DNA synthesis in the epithelial cells of the airways and a smaller early positive response in the parenchyma. Feeding of butylated hydroxytoluene during ETS exposure did not modulate lung tumor development. It was concluded that ETS is a pulmonary carcinogen in strain A/J mice.     

Dopamine and the regulation of cell proliferation in gerbil (Meriones unguiculatus) pyloric mucosa

The epithelium of the digestive system mucosa consists of a highly dynamic cell population. The conditions under which mitotic activity in the gastrointestinal epithelium is regulated is as yet poorly understood. Nevertheless, it is assumed that some biogenic amines might be involved. Having demonstrated that dopaminergic cells occur in the stomach of gerbils (Meriones unguiculatus), in the present study we examined the influence of dopamine antagonist haloperidol on the proliferation of epithelial cells in the mucosa of the stomach. Proliferating cells were detected immunocytochemically and quantified after in-vivo labeling with 5-bromo-2'-desoxyuridine in both haloperidol- and saline-treated animals. The results show that acute doses of haloperidol significantly increases the proliferation rate in the pyloric mucosa, suggesting that dopamine plays a probable modulatory role in the regulation of mitotic activity. These findings are discussed with regard to the role of paraneurons in regulating epithelial mitosis.     

V antigen-polyhistidine fusion peptide: binding to LcrH and active immunity against plague

The structural gene for V antigen (lcrV) is known to be encoded within the lcrGVH-yopBD operon of the approximately 70-kb low-calcium-response or Lcr plasmid of Yersinia pestis. This 37-kDa monomeric peptide was reported to provide active immunity in mice, suppress inflammatory cytokines, and regulate expression of the low calcium response (Lcr+). Here we describe pVHB62, encoding a polyhistidine-V antigen fusion peptide (Vh) and linked LcrH. Vh underwent degradation from both the C terminus and N terminus during classical chromatographic fractionation but remained intact within two compartments during Ni2+ affinity chromatography. The first was homogeneous, capable of active immunization (mouse intravenous 50% lethal dose, > 10(7) bacteria), and stable at 4 degrees C. The second remained bound to the affinity column but could be eluted as a mixture of Vh, LcrH, and low-molecular-weight material by application of 6 M guanidine HCl. This mixture was dialyzed, denatured in 8 M urea, and again applied to the affinity column, which then hound Vh but not LcrH. The latter was recovered and renatured, and low-molecular-weight material was removed by biochemical fractionation. The resulting homogeneous LcrH bound protein AN antigen fusion peptide but not protein A in a sandwich enzyme-linked immunosorbent assay, and this reaction was inhibited by Vh. These observations indicate that LcrH normally binds V antigen in bacterial cytoplasm and suggest that only free LcrH down-regulates expression of the low calcium response.     

The problem of the selection of an a posteriori error indicator based on smoothening techniques

This paper addresses the problem of assessing the quality of an a posteriori error estimate of a finite element solution. An error estimate based on local L2-projections is analysed in the case of translation-invariant meshes. It is shown that for general meshes this technique does not lead to an asymptotically exact estimator. The problem is analysed in detail in the one-dimensional setting. It is shown that an asymptotically exact estimator is not the optimal one when the solution is not sufficiently smooth. An optimal estimator for adaptively constructed meshes is given. Finally, a general mathematical framework for the quality assessment of estimators is introduced.