Ultrafast Electron–Phonon Coupling at Metal-Dielectric Interface

Energy transfer from photo-excited electrons in a metal thin film to the dielectric substrate is important for understanding the ultrafast heat transfer process across the two materials. Substantial research has been conducted to investigate heat transfer in a metal-dielectric structure. In this work, a two-temperature model in metal was used to analyze the interface electron and dielectric substrate coupling. An improved temperature and wavelength-dependent Drude–Lorentz model was implemented to interpret the signals obtained in optical measurements. Ultrafast pump-and-probe measurements on Au-Si samples were carried out, where the probe photon energy was chosen to be close to the interband transition threshold of gold to minimize the influence of non-equilibrium electrons on the optical response and maximize the thermal modulation to the optical reflectance. Electron-substrate interface thermal conductance at different pump laser fluences was obtained, and was found to increase with the interface temperature.     

Low temperature crystallographic data on Kevlar 49 fibres

Using X-ray diffraction data, the behaviour of Kevlar 49 fibres at low temperatures, up to –100°C, has been analysed. During cooling, the basal plane of the monoclinic unit cell shrinks whereas the c- (unique, chain axis) length is not significantly affected. In contrast, in the return heating cycle to ambient temperature, the basal plane expands and contraction occurs along the chain direction. The unit cell registers a reduction in volume in both the cooling and heating cycles. Conspicuously, after a cycle of cooling and heating, the unit cell does not return to its initial volume.     

Reducing cycle times in manufacturing and supply chains by input and service rate smoothing

A key performance parameter of a manufacturing network or supply chain is its cycle time; the time that a typical item spends in the network. A previous simulation study on a semiconductor assembly and test facility showed that cycle times could be reduced by having smooth input and service rates. This suggested that there is a “cycle time principle” that, for a system with a specified throughput or input rate, the shortest cycle times are obtained when the input and service rates do not vary over time. We prove that this principle is true for the M/G/1 and M/M/s queueing systems and Jackson networks. The analysis involves establishing several results on the concavity of waiting time probabilities and the convexity of expected waiting times and queue lengths, as functions of input and service rates. These results also have natural uses in other optimization problems.     

The spatial distribution and spectral characteristics of field-induced electron emission sites on broad-area high voltage electrodes

Instrumental techniques are described for displaying (a) the spatial distribution of field emission sites on planar high voltage electrodes and (b) the emission current pattern within an individual site. Typically, emission ‘sites‘ are generally composed of three or more ‘sub-sites’ that become temporally unstable at current > 10^?7 A. The electron energy spectra of sub-sites are characteristically single peaked, whose half-widths (FWHM) initially vary linearly with applied field: from changes in spectral area with field, substantially linear sub-site F-N plots have been obtained having β values in the range 300–500.     

Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

Metastatic parathyroid carcinoma in the MEN2A syndrome

We report a patient with a metastatic parathyroid carcinoma and medullary carcinoma of the thyroid. This patient represents a variation of the multiple endocrine neoplasia syndrome (MEN) type 2A. There was no evidence of a phaeochromocytoma. The case illustrates the difficulties that may be encountered in localising the source of PTH secretion; the patient underwent four unsuccessful exploratory operations of the neck and mediastinum before further investigations revealed a single metastatic deposit of parathyroid carcinoma involving the first thoracic vertebra. PCR amplification and sequencing of the RET oncogene from the metastatic parathyroid carcinoma and genomic DNA revealed a heterozygous mutation (Cys634Tyr) in exon 11, as has previously been described to occur in MEN 2A. In addition, loss of tumour heterozygosity was demonstrated at loci from chromosomes 1, 2, 3p, 13q and 16p. This represents the first report of a parathyroid carcinoma in a MEN2A patient, in which the multiple allelic deletions are consistent with the generalised losses observed in aggressive tumours.     

Premature introduction of progestin-only contraceptive methods during lactation

INTRODUCTIONS: Cochlear implants are used for the rehabilitation of bilaterally deaf patients. Due to the improvements in speech processing they might be also useful for patients with residual hearing and some speech understanding. METHODS: Pre- and postoperative speech understanding scores in 26 patients receiving implants were evaluated in a retrospective study. RESULTS: The preoperative pure-tone threshold in the implanted ear was between 80 and 115 dB in the frequency range of 500 to 2000 Hz. On the contralateral side the mean threshold was 10 dB better. The mean score for the number test was 11.3%, for the monosyllables below 5%. Postoperatively speech understanding improved significantly up to 97% for numbers and 48% for monosyllables (tested with the Freiburger Speech Test). Cochlear implantation also benefits patients with residual hearing and some speech understanding with hearing aids under optimum conditions. The speech understanding scores must be below certain limits. General selection criteria cannot yet be specified. The individual decision must be based upon several criteria, especially the speech understanding scores in quiet and noise under optimum conditions. A prospective study is needed to develop generally applicable criteria.     

Incisional hernia after laparoscopic nephrectomy with intact specimen removal: caveat emptor

The choline-containing phosphoglycolipid, MfGL-II, is the major polar lipid of Mycoplasma fermentans PG18. Anti-MfGL-II antisera raised in rabbits using the purified MfGL-II as an immunogen were employed in immunogold electron microscopic and immunofluorescence studies showing that MfGL-II is uniformly distributed and exposed on the cell surface of M. fermentans cells. The specificity of the antibodies was determined by immunostaining of lipid extracts separated by thin layer chromatography. The antibodies recognize lipids specific to M. fermentans but did not cross-react with lipid extracts of M. penetrans, M. capricolum, M. gallisepticum or Acholeplasma laidlawii. As phosphocholine almost completely abolished antibody interaction with MfGL-II in an ELISA assay it is suggested that the anti-MfGL-II repertoire is composed primarily of anti-phosphocholine antibodies. The anti-MfGL-II antisera inhibit the attachment of M. fermentans to Molt-3 lymphocytes suggesting that MfGL-II plays a major role in M. fermentans-host cell interaction.     

Disaster recovery planning in an automated manufacturingenvironment

Disasters may strike at any moment in any location. When they do, no distinction is made about the type of firm that is being affected, whether it is a bank or a manufacturing plant. Most firms do not plan for possible disasters, and those that do have typically focused on computer and data contingency planning. In this paper, the focus is shifted to incorporate disaster recovery planning for manufacturing enterprises, especially those that are automated. Automated manufacturing enterprises have characteristics that put them at an increased risk to disasters. The methodological framework proposed in this paper will aid manufacturing organizations and their managers in reducing the risks associated with unanticipated disasters. The framework is termed the “Manufacturing Operations Recovery and Resumption” model. Recommended activities and tools for effective management of this methodology are identified     

The dusty atmosphere of the brown dwarf Gliese 229B

The brown dwarf Gliese 229B has an observable atmosphere too warm to contain ice clouds like those on Jupiter and too cool to contain silicate clouds like those on low-mass stars. These unique conditions permit visibility to higher pressures than possible in cool stars or planets. Gliese 229B's 0.85- to 1.0-micrometer spectrum indicates particulates deep in the atmosphere (10 to 50 bars) having optical properties of neither ice nor silicates. Their reddish color suggests an organic composition characteristic of aerosols in planetary stratospheres. The particles' mass fraction (10(-7)) agrees with a photochemical origin caused by incident radiation from the primary star and suggests the occurrence of processes native to planetary stratospheres.