Ammoxidation of methylaromatics over vanadium phosphate catalysts II. Catalyst formation, active sites and reaction mechanism

The interactions of VOHPO₄· 0.5H₂O and (VO)₂P₂O₇ with the ammoxidation feed and the single components such as ammonia, oxygen, water and component mixtures were studied in detail using XRD and temperature-programmed reaction spectroscopy. The aim of this work was to improve the knowledge of the formation of the active phases or active sites of the catalysts from their precursors under the condition of the ammoxidation reaction. Similar catalytic properties of various applied VPO materials were discussed in terms of the presence of similar structure elements (domains of adjacent edge-sharing VO₆ octahedra-units and P-O-NH₄ groups).     

Experiences from Exporting Major Proof Assistant Libraries

The interoperability of proof assistants and the integration of their libraries is a highly valued but elusive goal in the field of theorem proving. As a preparatory step, in previous work, we translated the libraries of multiple proof assistants, specifically the ones of Coq, HOL Light, IMPS, Isabelle, Mizar, and PVS into a universal format: OMDoc/MMT. Each translation presented great theoretical, technical, and social challenges, some universal and some system-specific, some solvable and some still open. In this paper, we survey these challenges and compare and evaluate the solutions we chose. We believe similar library translations will be an essential part of any future system interoperability solution, and our experiences will prove valuable to others undertaking such efforts.

     

Microstructure and Microchemistry of Polymer-Derived Crystalline SiC Fibers

Stoichiometric and near-stoichiometric silicon carbide fibers, derived from the polymer polycarbosilane, have been characterized by scanning Auger and transmission electron microscope techniques. Excess carbon usually appeared in the fibers, but it could be eliminated by controlling processing conditions. The fibers consisted mainly of submicrometer-sized SiC microcrystals, with a considerably twinned and stacking-faulted β-SiC structure. Free carbon, which appeared in the form of graphite, was the only detectable intergranular phase in the nonstoichioinetric SiC fibers, while the stoichiometric SiC fibers contained no detectable second phase whatsoever.     

Nutritional Calcium Supply Dependent Calcium Balance,Bone Calcification and Calcium Isotope Ratios in Rats

Serum calcium isotopes (δ^44/42Ca) have been suggested as a non-invasive and sensitive Ca balance marker. Quantitative δ^44/42Ca changes associated with Ca flux across body compartment barriers relative to the dietary Ca and the correlation of δ^44/42Ca_Serum with bone histology are unknown. We analyzed Ca and δ^44/42Ca by mass-spectrometry in rats after two weeks of standard-Ca-diet (0.5%) and after four subsequent weeks of standard- and of low-Ca-diet (0.25%). In animals on a low-Ca-diet net Ca gain was 61 ± 3% and femur Ca content 68 ± 41% of standard-Ca-diet, bone mineralized area per section area was 68 ± 15% compared to standard-Ca-diet. δ^44/42Ca was similar in the diets, and decreased in feces and urine and increased in serum in animals on low-Ca-diet. δ^44/42Ca_Bone was higher in animals on low-Ca-diet, lower in the diaphysis than the metaphysis and epiphysis, and unaffected by gender. Independent of diet, δ^44/42Ca_Bone was similar in the femora and ribs. At the time of sacrifice, δ^44/42Ca_Serum inversely correlated with intestinal Ca uptake and histological bone mineralization markers, but not with Ca content and bone mineral density by µCT. In conclusion, δ^44/42Ca_Bone was bone site specific, but mechanical stress and gender independent. Low-Ca-diet induced marked changes in feces, serum and urine δ^44/42Ca in growing rats. δ^44/42Ca_Serum inversely correlated with markers of bone mineralization.     

Chemikalienfreie Bekämpfung von Holzschädlingen durch dielektrische Erwärmung mit Radiowellen und Mikrowellen

Thermal pest control requires long treatment times due to the low thermal conductivity of wood and may lead to the formation of cracks. Here, the thermal treatment with radio waves as well as microwaves has been studied. The direct dielectric heating has the advantage of a good homogeneity. The obtained temperature profiles for radio waves were more homogeneous compared to microwaves. Detailed studies showed that elimination of pests was not related to the application of the electromagnetic field itself, but due to the temperature increase.     

Low temperature sintering of barium titanate ceramics assisted by addition of lithium fluoride-containing sintering additives

By addition of LiF-containing sintering additives to commercial BaTiO₃ powder, more than 98% of the theoretical density was reached at a sintering temperature of 900 °C both on powder compacts and laminates. Dielectric measurements were performed on ceramic samples in the temperature and frequency ranges from −20 °C to 125 °C and from 10³ to 10⁶ Hz, respectively. High relative permittivity (_r  3160) and low dielectric loss (tan δ  0.014) were measured for tapes of the favoured material. The breakdown strength for tapes with a thickness of about 80 μm is 30 kV/mm. The microprobe analysis showed, that no interfacial reaction between the dielectric layer and the Ag-electrode had occurred.The newly developed barium titanate ceramics completely densifying at 900 °C turned out to be promising for integration of buried capacitors in LTCC multilayers.     

Thermal etching of GaAs (1 1 3) surfaces

We discuss scanning electron micrographs and atomic force microscope images of thermally etched GaAs(1 1 3) surfaces. The GaAs(1 1 3)A and GaAs(1 1 3)B surfaces are compared. The polarity of the surface leads to a different morphology for the two surfaces after thermal etching. It is found that the Ga-enriched droplets, which form under As-deficient conditions at higher temperatures, are sitting on characteristic pedestals, which are different for the two faces. The facets occurring after this thermal etching process are identified. They represent thermally favourable surfaces under the arsenic-deficient conditions of the thermal etching process. © 1998 Chapman & Hall     

Passive sensitization of human airways induces myogenic contractile responses in vitro

We assessed effects of passive sensitization on human bronchial smooth muscle (BSM) response to mechanical stretching in vitro. Bronchial rings were sham (control) or passively sensitized overnight by using sera from donors demonstrating sensitivity to Dermatophagoides farinae and having immunoglobulin E (IgE) concentrations of 2,600 +/- 200 U/ml. Tissues were fixed isometrically to force transducers to measure responses to electrical field stimulation (EFS) and quick stretch (QS). The myogenic response to QS was normalized to the maximal response to EFS (%EFS). The myogenic response of sensitized BSM was 47.9 +/- 10.9 %EFS to a QS of approximately 6.5% optimal length (Lo); sham-sensitized tissues had a myogenic response of 13.5 +/- 6.4 %EFS (P = 0.012 vs. passively sensitized). A QS of approximately 13% Lo in sensitized BSM caused a response of 82.8 +/- 20.9 %EFS; sham-sensitized tissues developed a response of 38.2 +/- 17.3 %EFS (P = 0.004). BSM incubated with serum from nonallergic donors did not demonstrate increased QS response (4.6 +/- 1.4 %EFS, P = not significant vs. tissue exposed to atopic sera). However, tissues incubated in sera from nonatopic donors supplemented with hapten-specific chimeric IgE (JW8) demonstrated augmented myogenic response to QS of approximately 6.5% Lo (21.9 +/- 6.2 %EFS, P = 0. 027 vs. nonatopic sera alone). We demonstrate that passive sensitization of human BSM preparations causes induction and augmentation of myogenic contractions to QS; this hyperresponsiveness corresponds to the IgE concentration in sensitizing sera.