Adaptive viewpoints for co-browsing on heterogeneous devices

Co-browsing is an activity in which a group of users navigate their way through of a set of Web pages together for a shared purpose. Effective co-browsing among users with different device capabilities requires a shared understanding of those Web pages. This paper demonstrates the concept of shared viewpoints (SVPs), and personal viewpoints (PVPs), for co-browsing, before detailing a framework for implementing these concepts. Finally, the effectiveness of the framework is presented through a perceptual experiment.     

InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

Effects of the glucocorticoid agonist, RU28362, and the antagonist RU486 on lung phosphatidylcholine and antioxidant enzyme development in the genetically obese Zucker rat

The biochemical maturation of the lung in late gestation and in the young animal is regulated by glucocorticoids. The present study was aimed at dissociating the different glucocorticoid receptor sites involved in these regulatory functions. The obese Zucker rat was selected as a model for this study as it exhibits hypersensitivity to glucocorticoid hormone action by virtue of its elevated receptor numbers and activity. Two synthetic steroid analogues were administered to obese animals; RU28362, a specific type II receptor agonist, and the type II antagonist RU486. RU28362 promoted a strong catabolic effect, which was associated with reduced food intake and the abolition of growth in the rats. The agonist, RU28362, attenuated developmental increases in antioxidant enzyme activities, and altered the growth of the tissue. At the age studied, development of the lung phosphatidylcholine (PC) system was almost complete, but RU28362 increased disaturated PC 16:0/16:0 concentrations by almost 2-fold, and altered the molecular composition of total pulmonary PC. RU486 attenuated the growth of the rats and reduced their food intake. Treatment with the type II antagonist attenuated lung growth and increased the activities of pulmonary copper zinc (Cu/Zn) and manganese (Mn) superoxide dismutases. RU486 had no effect on lung PC concentrations and molecular composition. The data suggest a role for type I glucocorticoid receptors in the regulation of the antioxidant enzyme system in the lung, as type II antagonism will channel endogenous glucocorticoid binding to the type I site. Type II receptor binding would appear to play a role in regulating the lung PC content.     

Cell cycle-dependent tumor necrosis factor apoptosis

To determine if tumor necrosis factor (TNF)-mediated apoptosis affects cells at defined stages of the cell cycle, WEHI-164/2F (WEHI) cells were synchronized at G0-G1 after 3-day cultures in medium containing RPMI 1640 and 0.5% FCS (RPMI-0.5% FCS). The arrested WEHI cells (60-75% in G0-G1) showed increased sensitivity to TNF killing, measured as 48-h 3-(5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide assays, and 15-h apoptosis by propidium iodide staining and flow cytometry analysis. The TNF killing kinetics of G0-G1-arrested cells was similar to controls, and TNF did not accelerate or retard cell cycle progression of the arrested cells after feeding with fresh RPMI-0.5% FCS. However, TNF inhibited WEHI DNA synthesis as early as 1 h after treatment, and inhibition was proportionate to sensitivity to TNF-induced apoptosis. WEHI cells treated with TNF showed a higher percentage of cells in S phase with concomitant decrease in G0-G1 and G2-M. When cultured for 3-18 h in fresh RPMI-0.5% FCS to allow progression of the G0-G1-arrested cells toward the G1-S boundary, WEHI cells became more sensitive to TNF killing, especially at the 3-9 h time points. Moreover, TNF did not degrade [125I]5-iodo-2'-deoxyuridine-labeled WEHI DNA if the labeled cells were precultured for 9 h in fresh RPMI-0.5% FCS to allow them to pass S phase before the addition of TNF. These results show that TNF-induced apoptosis of WEHI cells is connected to cell cycle events; WEHI targets receive the TNF cytotoxic signal mainly at the G1-S boundary and begin to die by apoptosis as they exit from S phase.     

Dynamic simulations of the molecular conformations of wild type and mutant xanthan polymers suggest that conformational differences may contribute to observed differences in viscosity

Xanthan gum is an exopolysaccharide secreted by the bacterium Xanthamonas campestris whose ability to make solutions viscous at low concentrations and over a pH and temperature range have generated much interest in both academic and industrial environments. Mutant Xanthamonas strains have been derived that produce xanthan gums with an altered or variant subunit chemical structure and different measured viscosities when compared with the wild type (wt) form of the polymer. Two variant gums were targeted as potentially interesting in this study, these being the nonacetylated tetramer (natet) and the acetylated tetramer (atet), which both lack a side-chain terminal mannose residue and in one case (natet) lacks an acetate group on an internal mannose residue. Solutions of these tetrameric gums possess viscosities higher (natet) and lower (atet) than the wt gum, and therefore we have attempted to determine whether these molecules possess unique conformational preferences when compared with the wt and with each other. In this manner we can initiate an understanding of how a polysaccharide's conformation contributes to its solution properties. The GEGOP software permits a sampling of the static and dynamic equilibrium states of carbohydrate molecules, and this software was employed to calculate equilibrium states of representative oligosaccharides with chemical structures representative of xanthan-like molecules. Energy minimization techniques revealed similar local minima for all three molecules. Some of these minima are comprised of elongate backbone conformations (A type) in which side chains fold onto backbone surfaces. Other minima with A backbones possessed side chains in less intimate backbone contact especially when calculations were performed with a low dielectric constant. This phenomenon was particularly pronounced in the wt molecule where an increased number of negatively charged side-chain residues experience charge repulsion resulting in reduced side-chain-backbone contact. Metropolis Monte Carlo (MMC) dynamic simulations performed with an elevated temperature factor (1000 K) allowed a better qualitative representation of conformational space than 300 K simulations. Employing a nonhierarchical cluster analysis method (population density profile: PDP) coupled with a classification scheme, it was possible to partition resulting MMC data sets into conformational families. This analysis revealed that in simulations performed with different dielectric constant values (10, 25, and infinity) all molecules possessed primarily A-type backbones. Less elongate, more open helical backbone forms (B, C, D, J, and Flat-a) did occur during the simulations but were populated to a lesser extent. In the natet molecule significantly open helical backbones existed (E, F, G, H, and I) that did not occur in the lower viscosity wt and atet molecules. PDP clustering methods and subsequent conformational classification applied to the first residue (mannose) of the side chain permitted a determination of side-chain orientation. Comparison of all three molecules indicated a larger population of side-chain conformational families in less direct backbone contact for the wt molecule than either of the variant molecules (natet/atet) suggesting that the side chains in the wt are more flexible. Thus, a major conformational difference between the high viscosity natet and the lower viscosities of the wt/atet is the increased amount of open helical backbone in the natet. In addition, the significant difference between the higher viscosity wt and the lower viscosity atet is the increase side-chain flexibility in the wt. We hypothesize that conformational differences of this kind could form a partial explanation of the observed differences in viscosity between these xanthan-like polymers.     

New encapsulation development for fine pitch IC devices

The continuous reduction of chip size driven by the market demand has a significant impact on circuit design and assembly process of IC packages. Shrinking chip size and increasing I/O counts require finer bond pad pitch and bond pad size for circuitry layout. As a result, serious wire deflection during transfer molding process could make adjacent wires short, and this issue becomes more critical as a smaller wire diameter has to be applied for the finer pitch wire bonded IC devices.This paper presents a new encapsulation process development for 50 μm fine pitch plastic ball grid array package. Since reduced wire diameter decreases the bending strength of bonded wires significantly, wire deflection during molding process becomes quite serious and critical. Experiments on conventional transfer molding were conducted to evaluate wire span threshold with 23.0 μm diameter gold wire. The results show that the wire span threshold is about 4.1 mm, which is much shorter than the wire span threshold of over 5.0 mm for wire with 25.4 μm diameter. Finite element analysis shows there is a significant difference in the wire deflection between 23.0 μm gold wire and 25.4 μm gold wire diameter under the same action of mold flow. A novel encapsulation method is introduced using non-sweep solution. The wire span could be extended to over 5.0 mm with wire sweep less than 1%. Reliability tests conducted showed that all the units passed 1000 temperature cycles (−55 to 125 °C) with JEDEC moisture sensitivity level 2a (60 °C/60% relative humidity for 120 h) and 3 times reflow (peak temperature at 220–225 °C). It is believed that this solution could efficiently overcome the risk of wire short issues and improve the yield of ultra fine pitch wire bonds in high-volume production.     

The sleeping dragon: Wind energy in the Asia-Pacific region

The Asia-Pacific region is one of the fastest growing regional economies in the world today. The region is home to over half of the global population and is one of the most important markets for multinational corporations to penetrate. The wind power sector is no exception. Wind resources remain untapped and the demand for electricity continues to grow as a result of expanding and modernizing economies. Godfrey Chua, Emerging Energy Research USA reports on the current status and development of the wind industry in the region.     

The glass fibre-polymer interface: II—Work of fracture and shear stresses

Pull-out experiments have been carried out on single production fibres under carefully controlled conditions. Four parameters were determined. The interfacial yield stresses, of about 9–14 MPa, were very much smaller than the shear strengths of the bulk polymers in the case of an epoxy, whether post-cured or not, and a non-post-cured polyester. Values for the work of fracture of the interface varied from 140 to 300 Jm^?2, and again were less than those of the polymer. Interface failure sometimes took place in the epoxy rather than at the fibre surface, whereas with the polyester it always took place at the fibre surface. After interface failure, pull-out was governed by friction, with maximum shear stresses of 7–10 MPa for polyester, and 21–34 MPa for epoxy, the higher values being obtained for the post-cured resins. Average frictional shear stresses were sometimes less than a half of the maximum shear stress, indicating that the fibre Poisson's shrinkage was playing an important role in the pull-out process. A silicone release agent reduced the frictional shear stresses to 2·5 MPa, with both resins.