Polyaniline films containing electrolessly precipitated palladium

Polyaniline (PAni) films with similar electroactivity were potentiodynamically grown at selected different scan rates and number of cycles. Palladium particles were incorporated in the electroactive polymer by electroless precipitation. The polymeric matrix morphology and its effect on the distribution and size of Pd particles was analysed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was observed that the dispersion of metal clusters was imparted by the nature of the polymer matrix. The results allowed to state a correlation between the polymer topography and the size and spatial distribution of the catalytic particles.     

Abrasive water jet machining and mechanical behavior of banyan tree saw dust powder loaded polypropylene green composites

Banyan tree saw dust powder (BSD) filled Polypropylene (PP) green composites have been fabricated with varying amounts viz., 0%, 20%, and 40% of BSD particulate filler by using a co‐rotating twin screw extruder followed by injection molding. The mechanical properties such as surface hardness, tensile behavior, and impact strength of the fabricated PP/BSD green composites have been studied in order to standardize the composites. Abrasive water jet (AWJ) machining has been reported mainly for ceramics, concrete, and glass but not much literature is available on AWJ machining of polymer composites. This research is aimed at examining the AWJ machining of green polymer composites. The effect of BSD loading on the AWJ machining behavior of the PP/BSD green composites has been investigated. Furthermore, the effect of addition of 4% maleic anhydride grafted PP (coupling agent) and 4% talc (mineral filler) on the machining behavior of PP/BSD composites has also been evaluated. Surface roughness and optical micrographs of the AWJ cut composite specimens were examined to assess the effect of BSD content, AWJ traverse speed and pressure on the machining behavior of the composites. In order to probe the mechanism of AWJ machining behavior of PP/BSD composites, the kerf width and taper have been measured and results are correlated. POLYM. COMPOS., 37:1754–1764, 2016. © 2014 Society of Plastics Engineers     

Effect of N-Vinyl-2-Pyrrolidone (NVP), a Bromodomain-Binding Small Chemical,on Osteoblast and Osteoclast Differentiation and Its Potential Application for Bone Regeneration

The human skeleton is a dynamic and remarkably organized organ system that provides mechanical support and performs a variety of additional functions. Bone tissue undergoes constant remodeling; an essential process to adapt architecture/resistance to growth and mechanical needs, but also to repair fractures and micro-damages. Despite bone’s ability to heal spontaneously, certain situations require an additional stimulation of bone regeneration, such as non-union fractures or after tumor resection. Among the growth factors used to increase bone regeneration, bone morphogenetic protein-2 (BMP2) is certainly the best described and studied. If clinically used in high quantities, BMP2 is associated with various adverse events, including fibrosis, overshooting bone formation, induction of inflammation and swelling. In previous studies, we have shown that it was possible to reduce BMP2 doses significantly, by increasing the response and sensitivity to it with small molecules called “BMP2 enhancers”. In the present study, we investigated the effect of N-Vinyl-2-pyrrolidone (NVP) on osteoblast and osteoclast differentiation in vitro and guided bone regeneration in vivo. We showed that NVP increases BMP2-induced osteoblast differentiation and decreases RANKL-induced osteoclast differentiation in a dose-dependent manner. Moreover, in a rabbit calvarial defect model, the histomorphometric analysis revealed that bony bridging and bony regenerated area achieved with NVP-loaded poly (lactic-co-glycolic acid (PLGA) membranes were significantly higher compared to unloaded membranes. Taken together, our results suggest that NVP sensitizes BMP2-dependent pathways, enhances BMP2 effect, and inhibits osteoclast differentiation. Thus, NVP could prove useful as “osteopromotive substance” in situations where a high rate of bone regeneration is required, and in the management of bone diseases associated with excessive bone resorption, like osteoporosis.     

Do glycerolipids display lateral heterogeneity in the thylakoid membrane?

The lateral heterogeneity of lipids in the thylakoid membrane has been questioned for over 20 yrs. It is generally believed that glycerolipids are asymmetrically distributed within the plane of the membrane. In the present investigation, we isolated several thylakoid membrane domains by using sonication followed by separation in an aqueous dextran-polyethylene glycol two-phase system. This technique, which avoids detergent treatments, allowed us to obtain stroma and grana lamellae vesicles as well as grana central core and grana margin vesicles from thylakoids. The relative distribution of the four lipid classes, i.e., monogalactosyldiacylglycerol, digalactosyldiacylglycerol, sulfoquinovosyldiacylglycerol, and phosphatidylglycerol, was found to be statistically identical in all four thylakoid fractions and in whole thylakoids. Similarly, the relative amount of fatty acids in each individual lipid and the eight main phosphatidylglycerol molecular species was identical in all thylakoid membrane fractions tested as well as in the intact thylakoid membrane. Based on presently available procedures for obtaining thylakoid subfractions that are unable to discriminate microdomains within the membrane, it is concluded that glycerolipids are evenly distributed within the plane of the thylakoid membrane. These data are discussed in terms of “bulk” and “specific” lipids.     

The effect of saralasin (1sar-8-ala-angiotensin II) on blood pressure in patients with Cushing's syndrome

To investigate the role of the renin angiotensin system in the pathogenesis of hypertension in Cushing's syndrome two patients with hypercorticism were infused with 20 mg saralasin (1-sar-8-ala-angiotensin II) over a period of 30 minutes under constant blood pressue control. In addition, one patient with primary aldosteronism, an established form of mineralocorticoid hypertension, served as control. Neither in the two patients with Cushing's syndrome nor in the patient with primary aldosteronism could a blood pressure lowering effect of saralasin be observed. In the two patients with hypercoritcism both renin activity and plasma aldosterone increased during saralasin infusion. The patient with primary aldosteronism only showed a weak increase in plasma aldosterone concentration.     

Novel inorganic precursors [Co4.32Zn1.68(HCO2)18(C2H8N)6]/SiO2 and Co4.32Zn1.68(HCO2)18(C2H8N)6]/Al2O3 for Fischer–Tropsch synthesis

The silica- and alumina-supported Co–Zn catalysts were synthesized by thermal decomposition of new inorganic precursors [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆]/SiO₂ or Al₂O₃. A novel coordination polymer formulated as [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆] (1) was prepared using the solvothermal technique and characterized by elemental analysis, FT-infrared spectroscopy. Thermal stability of the complex 1 was investigated by thermogravimetric analysis and differential scanning calorimetry, and its structure was determined by single-crystal X-ray diffraction. Characterization of catalysts was carried out using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET specific surface area. The catalysts were evaluated for Fischer–Tropsch synthesis (FTS) in the temperature range 200–300 °C. The results revealed that the synthesized catalysts have higher selectivity to the desired products at 260 °C. The performance of the catalysts was compared to those of catalysts constructed via impregnation method and the fabricated catalysts show higher activity and selectivity than the reference catalysts.     

The effects of food essential oils on cardiovascular diseases: A review

Essential oils (EO) are complex secondary metabolites, which are produced by aromatic plants and identified by their powerful odors. Present studies on EO and their isolated ingredients have drawn the attention of researchers to screen these natural products and evaluate their effect on the cardiovascular system. Some EO, and their active ingredients, have been reported to improve the cardiovascular system significantly by affecting vaso-relaxation, and decreasing the heart rate and exert a hypotension activity. Several mechanisms have been proposed for the role of EO and their main active components in promoting the health of the cardiovascular system. The objective of this review is to highlight the current state of knowledge on the functional role of EO extracted from plants for reducing the risk of cardiovascular diseases and their mechanisms of action. Research on EO has the potential to identify new bioactive compounds and formulate new functional products for the treatment of cardiovascular diseases such as arterial hypertension, angina pectoris, heart failure, and myocardial infarction.     

Combined effect of microwave and ultrasonication treatments on the quality and stability of sugarcane juice during cold storage

The main objective of this study was to investigate the combined effect of microwave (MW) treatment (2450 MHz for 120 s), ultrasonication (US) (24 KHz, 20 °C for 20 min) and combined treatment (MW-US) on the quality and stability of sugarcane juice (SCJ) during 21 days of storage at 4 °C. The effect of the treatments and storage time on physicochemical, bioactive compounds (total phenolic, flavonoids and ascorbic acid content) and microbial analysis of SCJ. No significant (P < 0.05) changes were observed in °Brix, while there was an increase in pH and a decrease in titratable acidity in all treatments. Compared to US and MW, MW-US treatments was more effective in preserving colour attributes, total phenolic and flavonoids contents, ascorbic acid and antioxidant capacities of the SCJ during storage. The results regarding the microbial count indicate that more microbial safety and longer shelf life was achieved by MW-US. MW-US treatment is an effective technology for improving the safety and shelf life of SCJ by minimising quality changes, retaining bioactive compounds and reducing microbial growth during storage.     

Soil effects due to sewage sludge application in agriculture

Field trials show that increased nutrients (mainly P) and heavy metals in soil due to agricultural use of sewage sludge have mainly to be expected when sludge is applied in too high amounts. The biological effects of heavy metals on plants are determined by their solubility which is increased by pH decrease and degradation of organic matter. Normally, it should be expected that the microbial activity in soil would increase with the application of organic matter in sewage sludge. But, also negative effects on the microflora by simultaneous enrichment of organic matter or inorganic and organic pollutants were found. The most important deleterious effects on soil microorganisms are the reduction in size of the total biomass, a reduced nitrogen fixing activity and changes in the composition of microbial populations of the soil. At what stage heavy metal toxicity to soil microorganisms or to microbial processes in soil is likely to become evident is unfortunately still uncertain. Again, the soluble fraction of heavy metals (also of organic pollutants) is a determing factor. To minimize the shown environmental risks an adequate sludge management is proposed.