Photon and vibration synergism on planar defects induced 2D-graphitic carbon nitride for ultrafast remediation of dyes and antibiotic ampicillin

Journal of Materials Science - Hybrid oxidation methodologies (HOMs) and active site enrichment of 2D nanocatalyst through defects induction are ubiquitously used for generating adequate reactive...     

Sintering studies of nano-crystalline zinc oxide

Sintering and grain growth of nano-crystalline undoped ZnO has been studied in detail over a wide range of temperature and holding time. Below 800 °C, sintering of over 70% theoretical density is not observed, irrespective of particle size. At 900 °C for 6 h, the nano-crystalline sample sinters to 99% of theoretical density whereas the density for as received sample is 93% of theoretical density. However, at 1300 °C or higher, the densification is found to be much faster and after a few hours becomes independent of holding time. Grain growth studies reveal a similar feature of attaining saturation over holding time. The average saturated grain size is found to be ∼1.5 and ∼2.2 μm at 800 and 900 °C, respectively, while at 1300 °C or higher, it is in between 12 and 13 μm.     

CARD: A Contact-based Architecture for Resource Discovery in Wireless Ad Hoc Networks

Traditional protocols for routing in ad hoc networks attempt to obtain optimal or shortest paths, and in doing so may incur significant route discovery overhead. Such approaches may be appropriate for routing long-lived transfers where the initial cost of route discovery may be amortized over the life of the connection. For short-lived connections, however, such as resource discovery and small transfers, traditional shortest path approaches may be quite inefficient. In this paper we propose a novel architecture, CARD, for resource discovery in large-scale wireless ad hoc networks. Our mechanism is suitable for resource discovery as well as routing very small data transfers or transactions in which the cost of data transfer is much smaller than the cost of route discovery. Our architecture avoids expensive mechanisms such as global flooding and complex hierarchy formation and does not require any location information. In CARD resources within the vicinity of a node, up to a limited number of hops, are discovered using a proactive scheme. For resources beyond the vicinity, each node maintains a few distant nodes called contacts. Contacts help in creating a small world in the network and provide an efficient way to query for distant resources. Using contacts, the network view (or reachability) of the nodes increases, reducing the discovery overhead and increasing the success rate. On the other hand, increasing the number of contacts also increases control overhead. We study such trade-off in depth and present mechanisms for contact selection and maintenance that attempt to increase reachability with reduced overhead. Our schemes adapt gracefully to network dynamics and mobility using soft-state periodic mechanisms to validate and recover paths to contacts. Our simulation results show that CARD is scalable and can be configured to provide desirable performance for various network sizes. Comparisons with other schemes show overhead savings reaching over 93% (vs. flooding) and 80% (vs. bordercasting or zone routing) for high query rates in large-scale networks.     

High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.     

The generalized Kuhn model of linear viscoelasticity

We propose a generalization of the Kuhn model of linear viscoelasticity. This generalization, which has four material parameters, is able to provide a near frequency independent response over a wide range of frequencies. It is useful for highly dissipative materials such as asphalt concrete. It is derived by generalizing Lubliner and Panoskaltsis’s modified Kuhn model, but we also show that it is closely related to fractional derivative models. We show that the model admits a rheological approximation, that is, an approximation by classical springs and dashpots. The model and rheological representation are compared to experimental data.     

Image estimation using fast modified reduced update Kalman filter

The authors have proposed some modifications of the reduced update Kalman filter (RUKF) as applied to filtering of images corrupted by additive noise. They have reduced the computational complexity by reducing the state dimensionality. By doing so, it is shown that the computational requirement is reduced by an order of magnitude while the loss of performance is only marginal. Next, the RUKF is modified using the score function based approach to accommodate non-Gaussian noise. The image is modeled as a nonstationary mean and stationary variance autoregressive Gaussian process. It is shown that the stationary variance assumption is reasonable if the nonstationary mean is computed by an edge and detail preserving efficient estimator of local nonstationary mean. Such an estimator, called the hybrid multistage medium D (HMSMD) filter, is also described. Detailed experimental results are provided which indicate the success of the new filtering scheme     

A bi-criteria model for the inventory aggregation problem under risk pooling

Inventory aggregation, also called Risk Pooling, is one of the most efficient ways to reduce the level of safety stocks thereby reducing inventory across the supply chain. Determining the best level of aggregation is a difficult problem and needs extensive study of all the possible scenarios that can affect this decision. Minimizing costs in a supply chain is no longer the sole priority of businesses. Maintaining a high level of responsiveness is also considered equally important. The conflicting nature of these two criteria makes the solution of the problem difficult. In this paper, we develop a bi-criteria nonlinear stochastic integer programming model to determine the best supply chain distribution network to meet customer demands, where minimizing costs while maintaining high levels of responsiveness is important. We develop a two-stage optimization algorithm to solve this problem.