Viscoelastic State for the Solutions of Spherically Symmetric Viscoelasticity Problems

The solutions of the spherically symmetric, linear, isothermal, and transient viscoelasticity problems via reciprocity theorem have been investigated for a specific material. The integral form of stress–strain relations has been used. The Laplace transform of a viscoelastic state, which is necessary for the integral equation arising as a result of reciprocity theorem, has been derived. This integral equation has been solved by Laplace transform. A sample problem has been solved to test the presented formulation. A numerical application of the analytic solution of this problem has been given.     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

PHASE EQUILIBRIUM FOR TERNARY LIQUID SYSTEMS OF WATER CARBOXYLIC ACID CHLORINATED HYDROCARBON: THERMODYNAMIC MODELING THROUGH SERLAS

Liquid-liquid equilibrium data of the solubility (binodal) curves and tie-line end compositions are presented for mixtures of [water (1) + formic acid, or acetic acid, or propanoic acid (2) + chlorobenzene, or 1,2-dichloroethane (3)] at T = 293.2 K and P = 101.3 ± 0.7 kPa. A log-basis approach, SERLAS (solvation energy relation for liquid-associated system), has been proposed to estimate the properties and liquid-liquid equilibrium (LLE) of associated systems containing proton-donating and -accepting and polar components capable of a physical interaction through hydrogen bonding or dipole-dipole interaction. The tie lines were also correlated using the UNIFAC-original model. The reliability of the models has been analyzed against the LLE data with respect to the distribution coefficient and separation factor. The proposed model appears to be an improvement in data fit for the ternary systems, yielding a mean relative error of 10.1% for all the systems considered.     

Hydrothermal derived nanostructure rare earth (Er,Yb)-doped ZnO: structural,optical and electrical properties

The structural, optical and electrical properties of undoped and rare-earth (Er, Yb) doped zinc oxide (ZnO) nanopowder samples synthesized by hydrothermal method were investigated. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy. The optical properties of undoped and rare-earth (Er, Yb) doped ZnO were carried out with UV–visible diffuse reflectance spectroscopy techniques. XRD results reveal that Yb and Er doped ZnO nanopowders have single phase hexagonal (Wurtzite) structure without any impurities. SEM analysis indicate that dopants with different radii affected the surface morphology of ZnO nanostructures. The optical band gap of all samples were calculated from UV–Vis diffuse reflectance spectroscopy data. We have obtained band gap values of undoped, Er and Yb doped ZnO as 3.24, 3.23, 3.22 eV, respectively. Electrical characterization of the samples were made in the 280–350 K temperature range using Van der Pauw method based on Hall effect measurement. The carrier concentrations decreased for both Er and Yb doping while the Hall mobility and electrical resistivity increased with Yb, Er doping compared to undoped ZnO nanopowder at room temperature. The temperature dependent resistivity measurements of Er doped ZnO showed a metal–semiconductor transition at about 295 K, while Yb doped ZnO showed characteristic semiconductor behavior.     

Routing table updating by using intelligent agents

In a network, one of the important problems is making an efficient routing decision. Many studies have been carried out on making a decision and several routing algorithms have been developed. In a network environment, every node has a routing table and these routing tables are used for making routing decisions. Nowadays, intelligent agents are used to make routing decisions. Intelligent agents have been inspired by social insects such as ants. One of the intelligent agent types is self a cloning ant. In this study, a self cloning ant colony approach is used. Self cloning ants are a new synthetic ant type. This ant assesses the situation and multiplies through cloning or destroying itself. It is done by making a routing decision and finding the optimal path. This study explains routing table updating by using the self cloning ant colony approach. In a real net, this approach has been used and routing tables have been created and updated for every node.     

Structural characterization of basalt-based glass–ceramic coatings

There are a lot of technologically interesting characteristics of glass–ceramics, which are hard, wear resistant, oxidation and corrosion resistant ceramic materials. In the present study, the production of the basalt-based glass–ceramic coating by atmospheric plasma spray technique and their structural characterization were reported. Basalt-based glass coating was performed on AISI 1040 steel substrate which was pre-coated with Ni–5 wt% Al by using plasma spray gun. Basalt coatings of the glass form were crystallized at 800, 900 and 1000 °C for 1–4 h in orders to transform to the glass–ceramic structure. The presence of augite [(CaFeMg)SiO₃], diopside [Ca(Mg_0.15Fe_0.85)(SiO₃)₂] and aluminian diopside [Ca(Mg,Al)(Si,Al)₂O₆] crystalline phases formed in the basalt-based glass–ceramic coating layer was detected by X-ray diffraction analysis. Optical microscopy with micrometer was used for metallographic examinations. Differential scanning calorimeter was used for determining the crystallization temperature of glass form basalt-based coatings. Microhardness measurements were carried out on the basalt-based glass–ceramic coating layer with Vickers indenter. The hardness of coating layers is changing between 1009 and 1295 HV_0.05 depending on crystallization temperature and process times. It was found that, the higher the crystallization temperature, the more the crystalline phases were resulted. In addition, the lower the crystallization temperature and the longer the treatment time, the harder the coating layer became.     

Recurrent osteoblastoma of the mandible: a case report

Amiodarone decreases plasma and tissue triiodothyronine (T3) and increases plasma cholesterol levels resembling changes seen during hypothyroidism. To elucidate the mechanism of amiodarone-induced hypercholesterolemia we investigated gene expression of three key proteins in cholesterol metabolism (cholesterol 7 alpha-hydroxylase, LDL receptor, HMG-CoA reductase) in livers of rats. Animals were treated with amiodarone or propylthiouracil (to induce mild hypothyroidism). The LDL receptor mRNA was downregulated (approximately 50%) in both amiodarone-treated and hypothyroid animals, while the other mRNA remained unchanged after 14-day treatment. The results suggest that amiodarone-induced hypercholesterolemia is associated with decreased LDL receptor mRNA levels.     

Thin film based semi-active resonant marker design for low profile interventional cardiovascular MRI devices

Objectives

A new microfabrication method to produce low profile radio frequency (RF) resonant markers on catheter shafts was developed. A semi-active RF resonant marker incorporating a solenoid and a plate capacitor was constructed on the distal shaft of a 5 Fr guiding catheter. The resulting device can be used for interventional cardiovascular MRI procedures.

Materials and methods

Unlike current semi-active device visualization techniques that require rigid and bulky analog circuit components (capacitor and solenoid), we fabricated a low profile RF resonant marker directly on guiding the catheter surface by thin film metal deposition and electroplating processes using a modified physical vapor deposition system.

Results

The increase of the overall device profile thickness caused by the semi-active RF resonant marker (130 µm thick) was lowered by a factor of 4.6 compared with using the thinnest commercial non-magnetic and rigid circuit components (600 µm thick). Moreover, adequate visibility performance of the RF resonant marker in different orientations and overall RF safety were confirmed through in vitro experiments under MRI successfully.

Conclusion

The developed RF resonant marker on a clinical grade 5 Fr guiding catheter will enable several interventional congenital heart disease treatment procedures under MRI.