Post-Weld Heat Treatment of Additively Manufactured Inconel 718 Welded to Forged Ni-Based Superalloy AD730 by Linear Friction Welding

A new post-weld heat treatment (PWHT) cycle was designed for novel dissimilar linear friction welding (LFW) of selective laser melted (SLM) Inconel 718 (IN718) to AD730 forged nickel-based superalloy. The microstructure and hardness of the joints after the PWHT are investigated and compared with those of as-linear friction welded samples. The precipitation of γ′ + γ″ is determined as the main mechanism to increase the mechanical properties of SLM IN718 alloy. These particles coarsened during heat treatment at 1253 K and double aging. The results show that the thermomechanical history of linear friction welded joints can affect the microstructure of IN718 alloy such as the morphology of δ phase after solution treatment (ST) from the platelike in the weld zone (WZ) to the needlelike in the base material (BM). It was found that in AD730, nanometric size γ′ particles reprecipitated close to the weld line during rapid cooling after welding. The presence of ultrafine γ′ particles and coarsening of the remaining particles in the microstructure of the alloy, during PWHT, can enhance the strength and hardness. The developed PWHT resulted in uniform hardness across the new dissimilar joint.

     

Spraying Cellulose Nanofibrils for Improvement of Tensile and Barrier Properties of Writing & Printing (W&P) Paper

An experimental spray coater was used to coat writing and printing (W&P) paper substrate with cellulose nanofibrils (CNFs) suspensions. The effects of spraying variables (i.e. concentration of suspension, spray pressure, distance and time of spray) on the coated sheets were analyzed in terms of the tensile strength, water vapor transmission rate (WVTR), and oxygen transmission rate (OTR). Basis weight and the thickness of coated layers in the different treatments were measured. In addition, image analysis of the microstructure examined the coating adhesion. The WVTR of the papers decreased, while tensile strength increased with one layer of CNF coating. The OTR was not changed with the CNF coating. The tensile strength and microstructure images of the coated papers indicate good adhesion between the CNF coating and the paper substrate when using the spray coater.     

Quasi-Isotropic Triaxially Braided Cellulose-Reinforced Composites

In this article, we investigate experimentally and analytically the mechanical properties of a natural fiber quasi-isotropic triaxially braided composite. The composite is prepared from triaxially braided regenerated cellulose fibers and a high-bio-content epoxy resin system using a resin infusion process. Simultaneous mechanical loading, digital image correlation, and acoustic emission tests were performed on notched and unnotched specimens to understand the tensile behavior of the composites and the initiation and propagation of damage. Experimental results were compared with the effective tensile properties determined using an analytical model. The model is a discrete three-layer analytical representation based on a mechanics transformation-based representation of the quasi-isotropic braided layers. The model is used to determine the elastic stiffness and Poisson effects based on the constituent properties such as the fiber volume fractions, the waviness of the bias tows, and the relative thickness of the braided preform. The experimental results show the analytical model's ability in predicting the composite's elastic properties. The unique fabric architecture is found to have a large influence on the strength properties across the different specimen geometries investigated.