Role of Nd-Ni on structural,spectral and dielectric properties of strontium-barium based nano-sized X-type ferrites

The influence of neodymium and nickel substitution on structural and dielectric parameters was investigated in strontium-barium X-type hexagonal ferrites having composition SrBaCu_2?xNi_xNd_yFe_28?yO₄₆ (x = 0, 0.2, 0.4, 0.6, 0.8, 1 and y = 0, 0.02, 0.04, 0.06, 0.08, 0.1). Sol-gel method was employed for synthesizing these hexagonal ferrites. The XRD plots of all studied materials which were annealed at 1250 °C show single phase characteristics. Lattice parameter ‘c’ increased as a consequence of larger radius of rare earth ion (Nd³⁺) as compared to (Fe³⁺), while lattice parameter ‘a’ showed very small variation. The cell volume was obtained in the range 2508.32–2523.75 (ų). The inclusion of Nd-Ni also affected X-ray density, bulk density and porosity. The FTIR spectroscopy indicated the particular absorption peaks of hexagonal ferrites and it was performed in the range of 500–700 cm^?1. On account of Nd-Ni doping, the dielectric constant, dielectric loss and AC-conductivity showed decreasing trend. The occupancy of Nd³⁺ ions at octahedral site impedes the valence alternation of Fe³⁺; therefore there was decrease in dielectric permittivity. Ac conductivity has been decreased from 9.14 to 6.49 (Ω cm)^?1 at frequency of 2.7 GHz. The Cole-Cole plots of synthesized materials noticeably revealed grain boundary contribution. The appearance of single semi-circle in impedance Cole-Cole graphs confirms the exceptional role of grain boundaries in the conduction process. The considerably lower dielectric parameters of investigated nano X-type ferrites propose their feasibility for high-frequency applications (phase shifters, dielectric resonators, stealth technology etc).     

Electron escape time from single quantum wells

A theoretical model for electrons escaping a quantum well under the influence of an applied electric field is developed. Both the thermionic emission and tunneling components of the currents are calculated, taking into account the proper partitioning between the two currents. The group velocity for a nonuniform electron distribution within the quantum well, which is a function of position and energy, and the continuous energy dependence of the quantum well density of states is considered. A comparison between this model and previously reported experimental results are made which demonstrates excellent agreement     

ROLE OF COMPOSITION ON THE VISCOSITY AND SHEAR STRESS TEMPERATURE BEHAVIOUR OF SOME LUBE OIL BASE STOCKS

Lubricating oil base stocks differ greatly in their chemical composition and consequently in their physical properties and applications. Influence of waxes and various hydrocarbon type constituents viz saturates and aromatic components on the viscosity and shear stress as a function of temperature in different lube oil base stocks has been studied in the present paper.     

Bias dependence of high-frequency noise in heterojunction bipolar transistors

Hawkins' isothermal model developed to study noise in bipolar junction transistors (BJTs) is modified to investigate bias-dependent noise in heterojunction bipolar transistors (HBTs) by incorporating thermal effects. It is shown that the inclusion of thermal effects into the high-frequency noise model of HBTs is necessary as the temperature of the device may become very different from the ambient temperature, especially at high bias current. Calculation of the noise figure by including the thermal effect shows that the isothermal calculation may underestimate the noise figure at high bias current. It is observed that noise at low bias is ideality factor n dependent whereas high bias noise is insensitive to the variation of n. Moreover, the common base current gain plays a major role in the calculation of the minimum noise figure. The excellent fit obtained between the theoretical calculation and the measured data are attributed to the inclusion of the bias-dependent junction heating as well as C/sub De/ and C/sub bc/ into the present calculation.     

An asymmetric line-axis compound parabolic concentrating single basin solar still

An asymmetric line-axis compound parabolic concentrating single basin solar still of concentration 1.15, exit aperture 0.24 metres and length 0.48 metres, 30° inclination and 60° half acceptance angle has been designed fabricated and tested.     

A simplified method for modelling the effect of blinds on window thermal performance

An approximate method is presented for predicting the effect of a louvered blind on the centre‐glass thermal performance of a fenestration. The method combines a one‐dimensional heat transfer model with data from a numerical simulation of the window and blind. Sample results for a blind mounted on the indoor surface of a window show the effect of blind slat angle on heat transmission. Both summer and winter conditions are considered. The results show that a louvered blind can improve the U‐value of a standard double‐glazed window by up to 37%. Also, the radiation heat exchange with the room can be dramatically reduced (by up to 60%), which will improve the level of occupant comfort. However, there was found to be a trade‐off between U‐value and occupant comfort; placing the blind closer to the window improves the U‐value, but increases the radiation heat exchange with the room. The predictions from the present simplified method compare well with results from a full two‐dimensional computational fluid dynamics solution of the conjugate blind/window interaction. Copyright © 2005 John Wiley & Sons, Ltd.     

A comparison between reliability analyses based primarily on disjointness or statistical independence: The case of the generalized indra network

A switching expression is readily convertible to a reliability expression if (a) all ORed terms are disjoint, and (b) all ANDed sums are statistically independent. The usual approach of system reliability analysis makes a primary use of (a) and a secondary use of (b). An alternative approach reverses the roles of (a) and (b). Symbolic reliability expressions for the source-to-terminal reliability of a generalized Indra network (GIN) with nonidentical components are derived by the two approaches. For this particular case, the second approach leads to a shorter, more elegant derivation and simpler novel results. Typical plots of the GIN reliability functions are presented and their properties are discussed.