Neural Computation of the MoM Matrix Elements for Planar Configurations

In this paper a new artificial neural network (ANN) based model for the calculation of the method of moments (MoM) matrix elements is presented. Training sets that characterize the matrix elements are first constructed. These sets are then utilized to effectively train two radial basis function (RBF) neural networks to accurately estimate all the elements of the MoM matrix for any mesh used. The potential of the proposed approach is demonstrated in the case of a narrow microstrip line. The current distribution on the microstrip line produced by the trained RBF networks agrees very well with the exact distribution. In addition, the proposed ANN model is much faster than the conventional MoM procedure.     

Design Techniques of CMOS Ultra-Wide-Band Amplifiers for Multistandard Communications

This paper presents design techniques of CMOS ultra-wide-band (UWB) amplifiers for multistandard communications. The goal of this paper is to propose a compact, simple, and robust topology for UWB low-noise amplifiers, which yet consumes a relatively low power. To achieve this goal, a common-gate amplifier topology with a local feedback is employed. The first amplifier uses a simple inductive peaking technique for bandwidth extension, while the second design utilizes a two-stage approach with an added gain control feature. Both amplifiers achieve a flat bandwidth of more than 6 GHz and a gain of higher than 10 dB with supply voltages of 1.8-2.5 V. Designs with different metal thicknesses are compared. The advantage of using thick-metal inductors in UWB applications depends on the chosen topology.     

Simulation of leachate migration in leaky aquifers

A two-dimensional cross-section finite difference model is presented to simulate density dependent leachate migration in leaky aquifers. Unlike existing models, a new approach is adopted to couple the groundwater-flow equation and the hydrodynamic dispersion equation with the elimination of the intermediate step of calculating velocities. The concept of the reference density is employed, permitting increased accuracy (over pressure-based models) in the representation of the transport process. The model is then used to study the effect of several hydraulic and transport parameters on the flow pattern and plume migration which are found to be very sensitive to most of these parameters. Equiconcentration and equipotential lines are overlapped to provide a better understanding of the coupling effect.     

Performance analysis of a solar-assisted swimming pool heating system

This paper deals with feasibility studies for a solar-assisted heating system for the University of Miami's Aquatic Center using the simulation program TRNSYS. The Aquatic Center is composed of an outdoor olympic size swimming pool and locker room building. The solar heating is accomplished by employing hot water generated by heat exchange with the solar collector working fluid. Two thermal storage tanks are employed for the collector and domestic use. The performance of the system is analyzed from both thermodynamic and economic standpoints and general conclusions are reached.     

SiGe: An attractive material for post-CMOS processing of MEMS

This work gives an overview of the different developments for silicon germanium (Si_1−xGe_x) from a MEMS post-processing perspective. First, the maximum processing temperature that does not introduce any damage or degradation into the standard characteristics of the CMOS driving electronics is specified. Then, the optimal type of silicon and germanium gas sources and deposition technique that results in an economical process are identified. Next, the selection criteria for a low thermal budget doping method and doping species are discussed. Finally, the advantage and disadvantage for the different approaches implemented for enhancing the physical properties of poly Si_1−xGe_x at a CMOS backend compatible temperature are highlighted. It is shown that the optimal method depends on the application requirements and the CMOS technology used for realizing the driving electronics.     

Possibility of Using Material Activated with Alkali as a Binder for Refractory Concretes

Refractories and Industrial Ceramics - This study aims to investigate the feasibility of alkali activated slag as a sole binder for refractory concretes. The concrete samples prepared are subjected...     

The Impact of Metastable Intermolrecular Nanocomposite Particles on Kinetic Decomposition of Heterocyclic Nitramines Using Advanced Solid‐Phase Decomposition Models

Journal of Inorganic and Organometallic Polymers and Materials - Surface oxygen of oxide catalyst has low coordination number; they are negatively charged. Surface oxygen can act active site for...     

Recycling of pharmaceutical waste gelatin for controlled‐release applications. I. A 2,4‐dicholorphenoxy acetic acid based system

Gelatin is a natural macromolecular protein. It contains a wide variety of amino acids in its polymer structure, and it is colorless to yellowish, water‐soluble, and tasteless. It is used as a dispersing agent, sizing medium, and coating for photographic films and in pharmaceutical formulations. In this study, biodegradable mulching, based on waste gelatin from pharmaceutical gelatin scraps (derived from pharmaceutical soft gelatin capsule production), was formulated via the casting of water solutions or suspensions into flexible and consistent films. Gelatin was blended with synthetic materials such as poly(vinyl alcohol) and other natural wastes such as sugar cane bagasse and sawdust. To all formulations, 2,4‐dichlorophenoxy acetic acid (2,4‐D) was added as a herbicide. The morphology and mechanical properties of the samples were investigated with scanning electron microscopy and tensile testing, respectively. The results showed that the produced films had controlled‐release properties. The effects of various additives and crosslinking on the films and the release of the herbicide 2,4‐D from the films were also investigated. The introduction of synthetic and natural additives reduced the release rate of 2,4‐D. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2313–2319, 2004     

Difference between mechanical alloying and mechanical disordering in the amorphization reaction of Al50Ta50 in a rod mill

Amorphous Al₅₀Ta₆₀ alloy powders have been synthesized by mechanical alloying (MA) from elemental powders of aluminium and tantalum, and mechanical disordering (MD) from crystalline intermetallic compound powders of AlTa respectively using the rod milling technique. The mechanically alloyed and the mechanically disordered alloy powders were characterized by X-ray diffraction, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, differential thermal analysis, differential scanning calorimetry and chemical analysis. The results have shown that the crystal-to amorphous transformation in the MD process occurs through one stage, while the crystallineto-amorphous formation in the MA process occurs through three stages. At the early and intermediate stages of the MA time, heating the alloy powders to 700 K leads to the formation of an amorphous phase by a solid-state amorphizing reaction. At the final stage of the MA time, the amorphous phase is crystallized through a single sharp exothermic peak. Contrary to this, amorphous alloy powders produced by MD are crystallized through two broad exothermic peaks.     

A large vocabulary system for Arabic online handwriting recognition

The success of using Hidden Markov Models (HMMs) for speech recognition application has motivated the adoption of these models for handwriting recognition especially the online handwriting that has large similarity with the speech signal as a sequential process. Some languages such as Arabic, Farsi and Urdo include large number of delayed strokes that are written above or below most letters and usually written delayed in time. These delayed strokes represent a modeling challenge for the conventional left-right HMM that is commonly used for Automatic Speech Recognition (ASR) systems. In this paper, we introduce a new approach for handling delayed strokes in Arabic online handwriting recognition using HMMs. We also show that several modeling approaches such as context based tri-grapheme models, speaker adaptive training and discriminative training that are currently used in most state-of-the-art ASR systems can provide similar performance improvement for Hand Writing Recognition (HWR) systems. Finally, we show that using a multi-pass decoder that use the computationally less expensive models in the early passes can provide an Arabic large vocabulary HWR system with practical decoding time. We evaluated the performance of our proposed Arabic HWR system using two databases of small and large lexicons. For the small lexicon data set, our system achieved competing results compared to the best reported state-of-the-art Arabic HWR systems. For the large lexicon, our system achieved promising results (accuracy and time) for a vocabulary size of 64k words with the possibility of adapting the models for specific writers to get even better results.