Mixing characteristics for the single and air-water two-phase flows in miniaturized parallel multichannel-based devices

Investigation on the miniaturized parallel multichannel-based devices packed with glass beads to improve the mass exchange execution is the critical focal point of the current study. One of the essential parameters to specify the miniaturized devices' flow distribution is the residence time distribution (RTD). In the present context, the RTDs of a liquid tracer were investigated for the air-water multiphase flows (concurrent) across the multichannel-based miniaturized devices (comprising of 11 similar dimensional parallel channels). The devices were variable in height and packed with glass beads. The conductivity estimations generated the RTD curves and were addressed by the axial dispersion model (ADM). The fluid-flow rates differed within the range of 5–23 ml min⁻¹. The axial dispersion coefficients and the rate of the specific energy dispersion were investigated. The effects of pressure difference and geometry on the hydrodynamic attributes and mixing properties were well-illustrated, and the new correlations were suggested.     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Synthesis and characterization of a novel Ca-alginate-biochar composite as efficient zinc (Zn2+) adsorbent: Thermodynamics,process design,mass transfer and isotherm modeling

In this present work, Ca-alginate-biochar adsorbent has been synthesized, characterized and tested its effectiveness in the removal of aqueous phase Zn²⁺ metal. The removal efficiency was studied under various physicochemical process parameters. External mass transfer model, intraparticle diffusion model and pseudo-first-order and pseudo-second-order models were used to fit the experimental Zn²⁺ adoption kinetic results and to identify the mechanism of adsorption. The desorption studies indicate the possibilities of ion-exchange and physical–chemical adsorption of Zn^2+. The adsorption was best described by Langmuir isotherm model. Thermodynamic parameters suggested that the adsorption process becomes spontaneous, endothermic and irreversible in nature.     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Using Web resources to construct multilingual medical thesaurus for cross-language medical information retrieval

Due to the language barrier, non-English users are unable to retrieve the most updated medical information from the U.S. authoritative medical websites, such as PubMed and MedlinePlus. However, currently, there is no any cross-language medical information retrieval (CLMIR) system that can help Chinese-speaking consumers cross the language barrier in finding useful English medical information. A few CLMIR systems utilize MeSH (Medical Subject Headings) to help overcome the language barrier. Unfortunately, the traditional Chinese version of MeSH is currently unavailable.In this paper, we employ a semi-automatic term translation method to construct a Chinese–English MeSH by exploiting abundant multilingual Web resources, including Web anchor texts and search–result pages. Through this method, we have developed a Chinese–English Mesh Compilation System to assist knowledge engineers in compiling a Chinese–English medical thesaurus with more than 19,000 entries. Furthermore, this thesaurus has been used to develop a prototypical system for cross-language medical information retrieval, MMODE, which can help consumers retrieve top-quality English medical information using Chinese terms.     

Antihyperglycemic activity of phenolics from Pterocarpus marsupium

Glucose levels in rats with hyperglycemia induced by streptozotocin were determined after i.p. administration of marsupsin (1), pterosupin (2), and pterostilbene (3), three important phenolic constituents of the heartwood of Pterocarpus marsupium. Marsupsin and pterostilbene significantly lowered the blood glucose level of hyperglycemic rats, and the effect was comparable to that of 1,1-dimethylbiguanide (metformin).     

SH3 binding domains in the dopamine D4 receptor

The dopamine D4 receptor is a G protein-coupled receptor (GPCR) that belongs to the dopamine D2-like receptor family. Functionally, the D2-like receptors are characterized by their ability to inhibit adenylyl cyclase. The dopamine D4 receptor as well as many other catecholaminergic receptors contain several putative SH3 binding domains. Most of these sites in the D4 receptor are located in a polymorphic repeat sequence and flanking sequences in the third intracellular loop. Here we demonstrate that this region of the D4 receptor can interact with a large variety of SH3 domains of different origin. The strongest interactions were seen with the SH2-SH3 adapter proteins Grb2 and Nck. The repeat sequence itself is not essential in this interaction. The data presented indicate that the different SH3 domains in the adapter proteins interact in a cooperative fashion with two distinct sites immediately upstream and downstream from the repeat sequence. Removal of all the putative SH3 binding domains in the third intracellular loop of the dopamine D4 receptor resulted in a receptor that could still bind spiperone and dopamine. Dopamine could not modulate the coupling of these mutant receptors to adenylyl cyclase and MAPK, although dopamine modulated receptor-G protein interaction appeared normal. The receptor deletion mutants show strong constitutive internalization that may account for the deficiency in functional activation of second messengers. The data indicates that the D4 receptor contains SH3 binding sites and that these sites fall within a region involved in the control of receptor internalization.     

The electrochemical behaviour of nitrogen-containing austenitic stainless steel in methanolic solution

The corrosion behaviour of nitrogen-containing austenitic stainless steel in methanol containing different concentrations of H₂SO₄, HCl, LiCl and H₂SO₄ + HCl has been investigated using a potentiostatic polarization method. The cathodic reaction in the H₂SO₄, HCl and H₂SO₄ + HCl solutions was proton reduction whereas in the neutral LiCl solution, oxygen reduction was the predominant cathodic reaction. Active, passive and transpassive behaviours were observed only for higher concentrations of H₂SO₄ (0.01–2.0 M) due to the inherent water content. A cathodic loop, characterized by measured negative current in the anodic region, was also observed in solutions, in which the concentration of H₂SO₄ was 1.0 M or higher. The relative stability of the passive films decreased as the H₂SO₄ concentration increased, and thus the steel suffered from mild pitting corrosion. In the chloride environment, the rate of corrosion increased as the Cl⁻ ion concentration increased. The presence of acid along with Cl⁻ ions enhanced corrosion, and the corrosion rate increased significantly. The steel suffered from mild intergranular corrosion in acidic chloride solutions of methanol. In the H₂SO₄ + HCl solutions, passive films were only formed when the H₂SO₄ to HCl concentration ratio was greater than ∼10:1.