Electrostatic Droplet Growth in a Neutrally Buoyant Emulsion

Droplet growth is examined in a water-in-oil type emulsion where the droplets are subjected exclusively to viscous and dielectrophoretic forces. The latter are produced by the interaction of the droplets with an otherwise uniformly imposed electric field. Theoretical considerations are presented as a basis for understanding and interpreting the experiments. An emulsion consisting of deionized water droplets in a silicone oil of specific gravity I is subjected to a uniform 60 Hz, ac electrostatic field. Initially, the droplets are fairly monodisperse with mean diameters of approximately 25 , sm. The changes in droplet size distributions with time are examined with a laser diffraction system for water volume fractions ranging from 0.001 to 0.1 and applied fields ranging from 52 to 520 kVm-1. The average droplet size increases exponentially with time; we examine the exponent's dependence on average field strength and droplet volume fraction.     

Input characteristics of variable modulation index controlled current source inverters

Standard PWM current source inverters (CSIs) usually operate at fixed modulation index. The proposed modified current source inverter (MCSI) can operate with most pulse width modulation (PWM) techniques and with a variable modulation index, since the DC link inductor current freewheels on itself and not through the CSI. The use of variable modulation index control results in faster response times with no penalty on input power factor as compared to other variable modulation index schemes. This paper confirms this by investigating the input characteristics of the MCSI as seen from the AC mains. The quality of the input AC line currents is examined, and a design procedure for the input filters is given. Power factor and efficiency are discussed. Results are compared to those of other current source inverter topologies. Experimental results obtained from a 5 kVA converter confirm the theoretical considerations.<>     

Comparison of the eye's wave-front aberration measured psychophysically and with the Shack-Hartmann wave-front sensor

The Shack-Hartmann wave-front sensor offers many theoretical advantages over other methods for measuring aberrations of the eye; therefore it is essential that its accuracy be thoroughly tested. We assessed the accuracy of a Shack-Hartmann sensor by directly comparing its measured wave-front aberration function with that obtained by the Smirnov psychophysical method for the same eyes. Wave-front profiles measured by the two methods agreed closely in terms of shape and magnitude with rms differences of approximately lambda/2 and approximately lambda/6 (5.6-mm pupil) for two eyes. Primary spherical aberration was dominant in these profiles, and, in one subject, secondary coma was opposite in sign to primary coma, thereby canceling its effect. Discovery of an unusual, subtle wave-front anomaly in one individual further demonstrated the accuracy and sensitivity of the Shack-Hartmann wave-front sensor for measuring the optical quality of the human eye.     

Quality of care problems among Medicare and Medicaid patients

The purpose of this study was to characterize quality of care problems among Medicare and Medicaid inpatients in New York State. The patients selected for this study comprised 1991 and 1992 Medicare and all 1992 Medicaid inpatients in whom quality of care problems with actual or potential adverse effects were found. The patients in this study were drawn from public, proprietary, voluntary and teaching hospitals. A total of 1000 quality of care problems with either actual or potential adverse effects were found in 706 Medicare patients. Two hundred and seventy-five (275) quality of care problems with actual or potential adverse effects were found in 154 Medicaid patients. Premature death occurred in 53 (7.4%) of the 706 Medicare and in 42 (27.2%) of the 154 Medicaid patients. Treatment problems and monitoring failures accounted for the majority of quality of care problems with actual or potential adverse effects for both Medicare (63.0%) and Medicaid (75.7%) patients. Among Medicare patients, the treatment of infections and antibiotic use, fluid and electrolyte management, and inappropriate drug use were among the leading causes of quality of care problems. Attending physicians were associated with the majority of Medicare quality of care problems while house staff and attending physicians were associated with the majority of those among Medicaid patients. The results of this study indicate that there are several leading causes of quality of care problems among Medicare and Medicaid patients. Treatment problems and monitoring failures together comprise the majority of such problems. Among Medicare patients, it was found that most quality of care problems were associated with the treatment of infections and antibiotic use, fluid and electrolyte management, and inappropriate drug use. Most quality of care problems among Medicaid patients were associated with these categories as well as with labor and delivery problems, and poor discharge planning. The results of this study reflect the peer-review process in which providers are given an opportunity to respond to physician-reviewer decisions about the presence of actual or potential adverse effects. Such a process, which permits the presentation of additional data and information by providers, produces fewer final adverse outcome determinations than a process uniquely based on chart review. The quality of care problems observed in this study are amenable to focused educational interventions. Such remedial interventions could yield significant improvements in the quality of care for all patients.     

Full expression of the exaggerated salt appetite of the spontaneously hypertensive rat requires a prenatal factor

1. The spontaneously hypertensive rat (SHR) exhibits a lower bodyweight in utero and an exaggerated salt appetite post partum. To determine whether salt appetite is affected by the perinatal environment, we measured the salt appetite of embryo-cross-transferred SHR and Wistar Kyoto (WKY) rats at maturity. 2. One-cell embryos were collected from the oviducts of donor rats and transferred into the oviducts of recipients through the infundibulum. The salt appetite of the resultant female offspring for 0.10 and 0.15 mol/L saline was measured at 20-30 weeks of age. 3. Salt intake of SHR gestated in WKY rats was significantly lower than that of SHR gestated in SHR, while that of WKY rats gestated in SHR was higher than that of WKY rats gestated in WKY rats. 4. Therefore, some maternal factor plays a role in the development of the exaggerated salt appetite of the SHR. This factor is also able to affect the later salt appetite of WKY rat offspring born to SHR surrogates.     

Enteropathogenic, enterotoxigenic and enteroinvasive Escherichia coli isolated from acute gastroenteritis patients in Lagos, Nigeria

Enteropathogenic, enterotoxigenic and enteroinvasive Escherichia coli were isolated from 52 (4.8%) of 1,082 patients with acute gastroenteritis reporting at the Lagos University Teaching Hospital, Lagos, Nigeria between October 1979 and March, 1981. Of the 52 strains of E. coli isolated, 35 (67.3%) were enteropathogenic, 12 (23.1%) were enterotoxigenic and five (9.6%) were enteroinvasive. E. coli 0111 (25.7%) was the most predominant among the serotypes of the "classical" enteropathogenic strains found in this study. Diarrhoea associated with enteropathogenic E. coli occurred only in children aged less than five years, whereas enterotoxigenic and enteroinvasive E. coli were found primarily in adults. The study has highlighted for the first time the important role that enterotoxigenic and enteroinvasive E. coli strains could play in acute diarrhoeal diseases in Lagos, Nigeria.     

Benchmarking Least Squares Support Vector Machine Classifiers

In Support Vector Machines (SVMs), the solution of the classification problem is characterized by a (convex) quadratic programming (QP) problem. In a modified version of SVMs, called Least Squares SVM classifiers (LS-SVMs), a least squares cost function is proposed so as to obtain a linear set of equations in the dual space. While the SVM classifier has a large margin interpretation, the LS-SVM formulation is related in this paper to a ridge regression approach for classification with binary targets and to Fisher's linear discriminant analysis in the feature space. Multiclass categorization problems are represented by a set of binary classifiers using different output coding schemes. While regularization is used to control the effective number of parameters of the LS-SVM classifier, the sparseness property of SVMs is lost due to the choice of the 2-norm. Sparseness can be imposed in a second stage by gradually pruning the support value spectrum and optimizing the hyperparameters during the sparse approximation procedure. In this paper, twenty public domain benchmark datasets are used to evaluate the test set performance of LS-SVM classifiers with linear, polynomial and radial basis function (RBF) kernels. Both the SVM and LS-SVM classifier with RBF kernel in combination with standard cross-validation procedures for hyperparameter selection achieve comparable test set performances. These SVM and LS-SVM performances are consistently very good when compared to a variety of methods described in the literature including decision tree based algorithms, statistical algorithms and instance based learning methods. We show on ten UCI datasets that the LS-SVM sparse approximation procedure can be successfully applied.     

A zero voltage transition boost converter employing a soft switching auxiliary circuit with reduced conduction losses

This paper presents a zero-voltage-transition (ZVT) boost converter using a soft switching auxiliary circuit for power factor correction (PFC) applications. The improvement over existing topologies lies in the positioning of the auxiliary circuit capacitors and the subsequent reduction in the resonant current and therefore the conduction losses as compared to other similar topologies. The proposed converter operates in two modes - Mode 1 and Mode 2. It is shown in the paper that the converter should be designed using the constraints obtained in Mode 1 to achieve low-loss switching. The converter is analyzed and characteristic curves presented which are then used in a detailed design example. Experimental results from a 250 W, 127 V input laboratory prototype switching at 100 kHz verify the design process and highlight the advantages of the proposed topology. The proposed converter is suitable for single-phase, two stage power factor correction circuits with universal input voltage range and power levels up to 3 kW.