Adaptive viewpoints for co-browsing on heterogeneous devices

Co-browsing is an activity in which a group of users navigate their way through of a set of Web pages together for a shared purpose. Effective co-browsing among users with different device capabilities requires a shared understanding of those Web pages. This paper demonstrates the concept of shared viewpoints (SVPs), and personal viewpoints (PVPs), for co-browsing, before detailing a framework for implementing these concepts. Finally, the effectiveness of the framework is presented through a perceptual experiment.     

InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

Evidence from sequence information that the interleukin-1 receptor is a transmembrane GTPase

Evidence is presented that the cytoplasmic domain of the type I interleukin-1 receptor (IL-1R) may be a GTPase. This domain conserves segments of hydrophobic amino acids that suggest a structural relatedness to the ras protooncogene protein and other members of the GTPase superfamily, despite a lack of significant detectable sequence homology. When the hydrophobic segments of the IL-1R were aligned with similar segments of the GTPases, it became apparent that the IL-1Rs possess a number of conserved amino acids that represent plausible functional residues for base-specific binding of GTP, magnesium chelation, and phosphate ester hydrolysis. Furthermore, a segment of five contiguous residues were found that is identical between ras and the IL-1R, and which is positioned to form part of the guanine base binding pocket. If this model is correct, then the IL-1Rs possess a highly conserved effector protein binding region, but one that is entirely unrelated to the effector regions of other superfamily members. Therefore, if the IL-1R is indeed a GTPase, then its activation function may be directed to as-yet unrecognized effector target proteins, as part of a unique cellular signal transduction pathway.     

New encapsulation development for fine pitch IC devices

The continuous reduction of chip size driven by the market demand has a significant impact on circuit design and assembly process of IC packages. Shrinking chip size and increasing I/O counts require finer bond pad pitch and bond pad size for circuitry layout. As a result, serious wire deflection during transfer molding process could make adjacent wires short, and this issue becomes more critical as a smaller wire diameter has to be applied for the finer pitch wire bonded IC devices.This paper presents a new encapsulation process development for 50 μm fine pitch plastic ball grid array package. Since reduced wire diameter decreases the bending strength of bonded wires significantly, wire deflection during molding process becomes quite serious and critical. Experiments on conventional transfer molding were conducted to evaluate wire span threshold with 23.0 μm diameter gold wire. The results show that the wire span threshold is about 4.1 mm, which is much shorter than the wire span threshold of over 5.0 mm for wire with 25.4 μm diameter. Finite element analysis shows there is a significant difference in the wire deflection between 23.0 μm gold wire and 25.4 μm gold wire diameter under the same action of mold flow. A novel encapsulation method is introduced using non-sweep solution. The wire span could be extended to over 5.0 mm with wire sweep less than 1%. Reliability tests conducted showed that all the units passed 1000 temperature cycles (−55 to 125 °C) with JEDEC moisture sensitivity level 2a (60 °C/60% relative humidity for 120 h) and 3 times reflow (peak temperature at 220–225 °C). It is believed that this solution could efficiently overcome the risk of wire short issues and improve the yield of ultra fine pitch wire bonds in high-volume production.     

The sleeping dragon: Wind energy in the Asia-Pacific region

The Asia-Pacific region is one of the fastest growing regional economies in the world today. The region is home to over half of the global population and is one of the most important markets for multinational corporations to penetrate. The wind power sector is no exception. Wind resources remain untapped and the demand for electricity continues to grow as a result of expanding and modernizing economies. Godfrey Chua, Emerging Energy Research USA reports on the current status and development of the wind industry in the region.     

The glass fibre-polymer interface: II—Work of fracture and shear stresses

Pull-out experiments have been carried out on single production fibres under carefully controlled conditions. Four parameters were determined. The interfacial yield stresses, of about 9–14 MPa, were very much smaller than the shear strengths of the bulk polymers in the case of an epoxy, whether post-cured or not, and a non-post-cured polyester. Values for the work of fracture of the interface varied from 140 to 300 Jm^?2, and again were less than those of the polymer. Interface failure sometimes took place in the epoxy rather than at the fibre surface, whereas with the polyester it always took place at the fibre surface. After interface failure, pull-out was governed by friction, with maximum shear stresses of 7–10 MPa for polyester, and 21–34 MPa for epoxy, the higher values being obtained for the post-cured resins. Average frictional shear stresses were sometimes less than a half of the maximum shear stress, indicating that the fibre Poisson's shrinkage was playing an important role in the pull-out process. A silicone release agent reduced the frictional shear stresses to 2·5 MPa, with both resins.     

Comparative efficacy of calcipotriol (MC903) cream and betamethasone 17-valerate cream in the treatment of chronic plaque psoriasis. A randomized, double-blind, parallel group multicentre study. Calcipotriol Study Group

PURPOSE: Ultrasound estimated bladder weight was compared before and after surgery for benign prostatic hyperplasia (BPH) to reveal a possible reversible change in bladder hypertrophy. MATERIALS AND METHODS: Ultrasound estimated bladder weight was measured before and after subcapsular (17) or transurethral (16) prostatectomy in 33 male patients with BPH. Sequential changes in the American Urological Association symptom score and urinary flow rate were also examined. RESULTS: Along with a significant improvement in the American Urological Association symptom scores and maximum flow rate, ultrasound estimated bladder weight decreased from 52.9 +/- 22.6 to 31.6 +/- 15.8 gm. in 12 weeks after treatment. In all but 4 patients (29 of 33, or 87.9%) ultrasound estimated bladder weight decreased to less than 35.0 gm. in 12 weeks after treatment. Interestingly, in all patients with an initial ultrasound estimated bladder weight of greater than 80 gm. the bladder weight still remained at an abnormally high level 12 weeks after treatment. CONCLUSIONS: Bladder hypertrophy was completely reversible after the surgical treatment of the obstruction in the majority of patients with BPH. The measurement of ultrasound estimated bladder weight was of value in monitoring therapeutic effects in BPH patients. An extraordinarily high ultrasound estimated bladder weight of 80 gm. or more might suggest degenerative and irreversible pathological changes in the bladder detrusor.     

Glass-ionomer cements in restorative dentistry

This article reviews the current status and future prospects for glass-ionomer materials. These materials are of two chemical types: the older, self-hardening cements, which set by an acid-base neutralization reaction to give relatively brittle materials; and the newer, resin-modified cements, which set partly by polymerization and partly by neutralization. Compared with the self-hardening cements, the latter materials have improved esthetics, improved resistance to moisture, and greater toughness. Both types of glass-ionomer cement bond well to enamel and dentin and release a clinically useful amount of fluoride. They have been used in a variety of applications: as liners or bases, for luting of stainless steel crowns, for Class V restorations in permanent teeth, and for Class II and Class III restorations in primary teeth. The resin-modified glass-ionomers are particularly promising for these latter uses, although it is too early to be sure whether their long-term durability is sufficient. Self-hardening glass-ionomer materials are likely to retain specific niches of clinical application, including in their metal-reinforced and cermet-containing forms.