Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

Vibrating Wire Thermometry in Superfluid 3He

We report systematic measurements of the response of a Vibrating Wire Resonator (VWR) in normal and superfluid liquid ³He. Special attention has been paid to the hydrodynamic regime of the superfluid B-phase, where the response parameters of the VWR do not follow a simple law. We show that a simple interpolation between the region where first order slip-corrections can be applied and the ballistic regime is insufficient. Measuring an empirical effective viscosity, we propose a temperature calibration method which allows the use of VWRs as a secondary thermometer at intermediate and high pressures in the temperature range 0.2 T _c < T < 50 mK.     

Off-Site Exposure to Respirable Aerosols Produced during the Disk-Incorporation of Class B Biosolids

Field experiments were conducted at a Class B biosolids land application site in central Arizona to measure, model, and source-track the off-site transport of aerosols emitted when biosolids were disk-incorporated into soils. Real-time PM10 monitoring provided time-resolved aerosol information sufficient for verifying both off-site concentration and off-site exposure time model results. Under the conditions considered and at a distance of 165?m from the aerosol source, biosolids disk-incorporation resulted in an intermittent exposure to biosolids-derived aerosol concentration between 15 and 40?μg/m3 and an inhalable biosolids dose between 2 and 8?μg. Transport modeling predicted that these doses will decrease with increasing wind speed. In addition, three DNA sequence-based biosolids source tracking methods were applied to aerosol samples and confirmed the presence of biosolids in aerosols at 5, 65, and 165?m from the aerosol source. Field measurements and modeling indicate that the nature of biosolids-derived aerosol exposure is a series of intermittent high concentration puffs, rather than a continuous low concentration.     

Solidification Behavior of Undercooled Liquid Aluminum Oxide

Solidification of aluminum oxide from undercooled melts was investigated in containerless experiments. Specimens were levitated in a gas jet, stabilized with an acoustic positioning device, and melted with cw CO₂ laser beams. Cooling curves were obtained by optical pyrometry when the laser intensity was reduced. The materials examined were high-purity Verneuil sapphire, 99.5% polycrystalline alumina, and oxide materials recovered from the effluent of an aluminum-fueled rocket motor. The degree of undercooling, the apparent temperature behavior during the thermal arrest on solidification, and the structure of the materials formed were different in argon and oxygen atmospheres. Undercooling of the sapphire and alumina materials was 360 ± 10 K in an oxygen atmosphere and approximately 450 K in argon. Melting and solidification of high-purity sapphire resulted in a dendritic and porous polycrystalline material in oxygen. Dense, larger crystals were obtained in argon. Products formed from 99.5% alumina were discolored and the cores were white, indicating impurity segregation effects. More reproducible behavior was observed for the sapphire and 99.5% alumina than for the tungstencontaminated rocket motor effluent materials.     

The Influence of the Amount of Fluoride Catalyst on the Morphological Properties of the Anilinepropylsilica Xerogel Prepared in Basic Medium

Anilinepropylsilica hybrid powder was synthesized by a sol-gel route in basic medium using HF as catalyst. The effect of the amount of HF catalyst on the morphologies and on organic content was studied. The xerogels were characterized using FTIR, SEM and N₂ adsorption-desorption isotherms. The increase in the HF quantity results in an slight increase in organic content and changes in the particle size, surface area and pore structure.     

Centurion syndrome. Idiopathic anterior displacement of the medial canthus

Bone marrow transplantation (BMT) using HLA-partially matched family donors has produced disappointing results (25-30% of long-term survivors) in patients with severe aplastic anemia. We describe two children affected by severe aplastic anemia, not responsive to immunosuppressive therapy, who underwent allogeneic bone marrow transplantation using a HLA-partially matched family donor. Both cases presented 2 first class HLA-antigens (A and B) disparity between donor and recipient. The pretransplant conditioning regimen consisted of cyclophosphamide, thoracoabdominal irradiation, cytosine-arabinoside, and antilymphocyte globulin. As graft versus host disease (GVHD) prophylaxis, Cyclosporine-A was administered at usual dosages for 6 months. A full marrow engraftment was observed in both cases. Only grade I acute GVHD, promptly responsive to corticosteroid therapy, developed with no chronic GVHD. Five months after transplant, both children progressively developed hypertension, renal function impairment, thrombocytopenia, and severe normochromic anemia, with erythropoietin serum levels lower than expected for the haematocrit. After antihypertension treatment and supportive therapy, the clinical picture progressively improved, while treatment with recombinant human erythropoietin completely corrected the long-lasting anemia. The two children are alive and well 28 months after the transplant, with a Karnofsky score of 100% and a normal peripheral blood count. The authors suggest that, once immunosuppressive therapy has failed, BMT from donors other than HLA-identical sibling is a feasible approach in children affected by severe aplastic anemia, not having an HLA-identical donor.     

Automatic detection of mass-resolved ion conics

A processing algorithm for automatically detecting a specific type of ion distribution (called the ion conic distribution) in data obtained from a space-based mass spectrometer has been devised. Automation of this task is necessary due to the sparseness of conic events within the very large databases typical of space plasma instruments. The algorithm used to perform this automated analysis and the methods used to verify the algorithm are described. Initial results on the characterization of the near-Earth space plasma are summarized     

Green Tax Reforms and Computational Economics A Do-it-yourself Approach

The double or even triple dividend hypothesis of green tax reforms has beena major issue of dispute in both the scientific community and the politicalarena during the last decade. Theoretical analysis has provided a number ofimportant qualitative insights to the debate but lacks of actual policyrelevance due to very restrictive assumptions. Applied research that takes thestep from stylized analytical to complex numerical models usually comes as ablackbox to non-expert modelers. This paper aims at bridging the gap betweenstylized theoretical work and numerical analysis. We develop a flexible,interactive simulation model which is accessible underhttp://brw.zew.de. Users can specify their own green tax reforms andevaluate the induced economic and environmental effects. Based on illustrativesimulations, we demonstrate the usefulness of our do-it-yourself approach fora better understanding of the double (triple) dividend hypothesis.