An expert system for XPLE cable deterioration diagnosis and life forecasting

The recent increase in the demand for power in urban areas has caused changes in the way power is supplied. Underground distribution systems have been introduced for convenience in urban areas and to prevent injuries in case of a crisis. As a result, many new types of power cables are being used. One type, XPLE cables (also called CV cables) have been rapidly taking the place of conventional cables such as OF or SL cables since the 1960s because of their relatively easy installation and maintainability. However, distribution cables used under severe environmental conditions deteriorate rapidly (due mainly to water treeing), and some cables experience insulation breakdown. Therefore, many diagnostic methods have been developed, though they have not been very effective. By combining methods, a high reliability can be achieved in comparison to the use of a single method. However, processing the data is difficult for on-site personnel, so many experts are required. But there is a lack of qualified experts, hence we have turned to the development of expert systems.     

Thermal Shock Behavior of Porous Silicon Carbide Ceramics

Using the water-quenching technique, the thermal shock behavior of porous silicon carbide (SiC) ceramics was evaluated as a function of quenching temperature, quenching cycles, and specimen thickness. It is shown that the residual strength of the quenched specimens decreases gradually with increases in the quenching temperature and specimen thickness. Moreover, it was found that the fracture strength of the quenched specimens was not affected by the increase of quenching cycles. This suggests a potential advantage of porous SiC ceramics for cyclic thermal-shock applications.     

Preparation of heterotactic-rich poly(methyl methacrylate) with narrow molecular weight distribution bytert-butyllithium/bis(2,6-di-tert-butylphenoxy)methylaluminum

Summary Polymerization of methyl methacrylate (MMA) withtert-butyllithium (t-C₄H₉Li) in toluene in the presence of aluminum alkoxides such as ethoxide,tert-butoxide and 2,6-di-tert-butylphenoxide, were examined at various Al/Li ratios. In the cases of ethoxide andtert-butoxide, predominantly isotactic polymers with broad molecular weight distribution were obtained. Combinations oft-C₄H₉Li and bis(2,6-ditert-butylphenoxy)methylaluminum [MeAl(ODBP)₂] were found to be an efficient initiating system for heterotactic polymerization of MMA, which gives PMMA rich in heterotactic triads up to 68% with narrow molecular weight distribution (Mw/Mn=1.09–1.17). End group analysis by¹H NMR indicated thatt-C₄H₉Li initiates the polymerization and MeAl(ODBP)₂ works as a stereospecific modifier. From stereosequence analysis of the heterotactic PMMA by¹³C NMR, it was found that the calculated pentad fractions from the first-order Markovian statistics (Pm/r=0.742, Pr/m=0.627) fitted the observed ones better than those from Bernoullian statistics. The glass transition temperature of the heterotactic PMMA was 13°C lower than that of syndiotactic PMMA, and the intrinsic viscosity in tetrahydrofuran was close to that of isotactic PMMA with a similar molecular weight but higher than that of syndiotactic PMMA.     

Fracture Energies of Tape-Cast Silicon Nitride with β-Si3N4 Seed Addition

The fracture energies of the tape-cast silicon nitride with and without 3 wt% rod-like β-Si₃N₄ seed addition were investigated by a chevron-notched-beam technique. The material was doped with Lu₂O₃–SiO₂ as sintering additives for giving rigid grain boundaries and good heat resistance. The seeded and tape-cast silicon nitride has anisotropic microstructure, where the fibrous grains grown from seeds were preferentially aligned parallel to the casting direction. When a stress was applied parallel to the fibrous grain alignment direction, the strength measured at 1500°C was 738 MPa, which was almost the same as room temperature strength 739 MPa. The fracture energy of the tape-cast Si₃N₄ without seed addition was 109 and 454 J/m² at room temperature and 1500°C, respectively. On the contrary, the fracture energy of the seeded and tape-cast Si₃N₄ was 301 and 781 J/m² at room temperature and 1500°C, respectively, when a stress was applied parallel to the fibrous gain alignment. The large fracture energies were attributable primarily to the unidirectional alignment fibrous Si₃N₄ grains.     

Effect of Agglomeration on Mechanical Properties of Porous Zirconia Fabricated by Partial Sintering

Porous ZrO₂ ceramics were fabricated by compacting a fine ZrO₂ powder, followed by pressureless sintering. Two unidirectional pressures of 30 and 75 MPa were used to prepare the green compacts. The strength and the fracture toughness of porous ZrO₂ specimens sintered from the compacts prepared by 75 MPa were substantially higher than those by 30 MPa, especially for the specimens with low porosity. However, the corresponding Young's moduli were identical. This caused the strain to failure of these porous bodies to increase significantly with increasing compaction pressure. Microstructural analyses showed that a number of voids and small flaws existed in the green compacts prepared by the lower pressure, due to the agglomeration of fine ZrO₂ grains. It was revealed that the ZrO₂ agglomeration resulted in a localized nonuniform shrinkage and degraded the mechanical properties of porous ZrO₂ ceramics.     

Uniformly Porous Composites with 3-D Network Structure (UPC-3D) for High-Temperature Filter Applications

Uniformly porous composites with 3-D network structure (UPC-3D) have been recently developed via a pyrolytic reactive sintering process, which takes advantage of the evolved CO₂ gas from a decomposing carbonate source (e.g., dolomite, CaMg(CO₃)₂) and does not require any additional pore-forming agent nor long-time burning-out process. Through liquid formation via LiF doping, strong necks are formed between constituent particles before completion of the pyrolysis of carbonate, resulting in the formation of a strong 3-D network structure. The pore size distribution is very narrow (with typical pore size: ∼1 μm), and the porosity was controllable (∼30–60%) by changing the sintering temperature. This article presents the development details of UPC-3D, and reports the recent findings in CaZrO₃/MgAl₂O₄ system, which will be one of the more promising systems for practical applications.     

Diel rhythms of calling behavior and pheromone production of oriental tobacco budworm moth,Helicoverpa assulta (Lepidoptera: Noctuidae)

Both calling behavior and titer of (Z)-9-hexadecenal (Z9-16: Al), the major sex pheromone component ofHelicoverpa assulta, in pheromone glands showed distinct diel periodicity, and these two were synchronous. Calling was most actively performed and the pheromone titer reached a maximum from 2 to 6 h after lights-off. During photophase, no calling was shown and only a relatively small amount of Z9-16:A1 was detected. However, there was a time lag of a few days between peak calling activity and maximum pheromone titer. The pheromone titer was maximal from age 1 day to age 5 days and thereafter decreased while calling was most actively performed after age 3 days. Titers of three minor components, hexadecenal, (Z)-11-hexadecenal, and (Z)-9-hexadecenyl acetate, showed similar daily fluctuation patterns to that of Z9-16:Al, but relative to the titer of Z9-16:Al, the titer of the two aldehyde components remained relatively constant whereas that ofZ9-16:Ac increased in the late scotophase.     

Role of electron-phonon interaction in lattice dynamics and superconductivity of oxide spinel LiTi2O4

The lattice dynamics of an oxide spinel LiTi₂O₄ is studied by taking account of the electron-phonon (EP) interaction derived on the basis of the realistic tight-binding bands fitted to the first-principles bands. Due to the characteristic dependences of the EP interaction on wavevectors and vibrational modes, a remarkable frequency renormalization of the O vibrational modes, which hybridize with the Ti vibrational modes, is obtained over a wide region of the Brillouin zone. The overall features of the calculated phonon density of states are in agreement with those observed by the inelastic neutron scattering measurements. By using the EP interaction and the renormalized phonon frequencies we have calculated the EP spectral function ² F(). The superconducting transition temperature, gap function, and tunneling spectra are calculated by solving the Éliashberg equation. The results agree well with the observations.     

Development of fault cause estimation method for distribution line

We are planning to develop the new Advanced Distribution Automation System (ADAS) equipped with optical communication network and sectionalizer with sensor for more grid reliability and efficiency on maintenance operation. The new system is featured with the function of fault cause or damaged part estimation. The new sectionalizer captures the waveform of electrical line surge originated by fault and the system analyzes the waveform for this function. This paper mainly introduces the system configuration of ADAS and an early stage examination of fault cause estimation technology.     

Measurement of vertical and horizontal vibrations of a probe for acoustic evaluation of food texture

Two‐dimensional (vertical and horizontal) vibrations of a wedge‐type probe upon food rupture were evaluated separately using two accelerometers placed perpendicular to a guide rod of a swing‐arm device for texture evaluation of the flesh of three varieties of apples and three types of potato chips. Voltage signals from the accelerometers were filtered using a half‐octave band‐pass filter. The energy texture index (ETI), based on kinetic energy of the vertical or horizontal probe vibrations, was calculated over low to high frequency bands (no. 1–21). The spectra for the flesh of the three varieties of apples included two common peaks for vertical ETI at band no. 11 (1,120–1,600 Hz) and 19 (17,920–25,600 Hz) and horizontal ETI at band no. 1 (0–10 Hz) and 15 (4,480–6,400 Hz). The spectra for the three types of potato chips had a common ETI peak at band no. 11 (1,120–1,600 Hz) for horizontal ETI and at no. 15 (4,480–6,400 Hz) for vertical ETI. The three apple varieties gave rise to different intensities of vertical and horizontal ETIs while the two peaks were maintained. The thick potato chip type had higher vertical and horizontal ETIs than the thin and soft varieties in most bands; however, the thin type had the highest vertical ETIs only in lower bands (0–200 Hz). The soft type had the lowest vertical and horizontal ETI. The above results suggest that different food textures can be distinguished by two‐dimensional vibration analyses of probe insertion into a food sample based on frequency bands.