Continuous hydrogen evolution from cyclohexanes over platinum catalysts supported on activated carbon fibers

The continuous production of hydrogen from cyclohexanes is achieved effectively using Pt/ACF (ACF = activated carbon fiber) catalysts in a fixed-bed flow reactor. The Pt catalysts are more effective than a Pd/ACF catalyst for the reaction. Besides cyclohexane, methylcyclohexane, 1,4-dimethylcyclohexane, and p-menthane can also be employed as hydrogen source in the reaction system.     

In situ synthesis of TiC particulate-reinforced aluminum matrix composites

Particulate TiC-reinforced aluminum composite specimens were processed by compacting a mixture of titanium, carbon, and aluminum powders into preforms that were infiltrated with molten aluminum and subsequently heated in a differential thermal analyzer to about 1573 K under argon atmosphere. The onset of formation of TiC particles began at about 1150 K by reaction of TiAl₃ with Al4C₃. Subsequent formation of TiC particles at higher temperatures to approx-imately 1265 K occurred by direct reaction of carbon with TiAl₃. Above this temperature, the TiC particles coarsened with increasing temperature from an initial size of about 0.15μm. TiC particles were also produced in preforms that were not infiltrated; however, the presence of liquid aluminum in infiltrated specimens inhibited particle agglomeration and sintering. Infil-trated preforms could, therefore, serve as excellent "master alloys" for subsequent dilution in an aluminum melt and processing of metal-matrix composites (MMCs) reinforced with sub-micron TiC particulates. Formerly Research Scientist, Massachusetts Institute of Technology, Cambridge, MA 02139     

Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid-based solvents

Recently, the development of efficient and environmentally benign solvents has received great attention to replace current harsh organic solvents. In this context, low-transition-temperature mixtures (LTTMs) have emerged as favorable green solvents for biomass delignification. Palm oil biomass, empty fruit bunch (EFB) was pretreated with commercial l-malic acid and microwave hydrothermally extracted cactus malic acid-derived LTTMs at 60, 80, and 100 °C. The LTTMs applied in this study were derived from malic acid–choline chloride–water and malic acid–monosodium glutamate–water with a molar ratio of 2:4:2 and 3:1:5, respectively. Three first-order reactions were used to express the delignification kinetic model of EFB. The first term was based on the initial stage and assigned as infinite due to the fast rate of delignification which could not be detected. The second and third terms were proportional to bulk and residual delignification stages. A good agreement was obtained between the kinetic model and the experimental data obtained in this study with R²?≥?0.91. The activation energies for the delignification reactions using l-malic acid and cactus malic acid-based LTTMs in the bulk and residual stages were approximated as 36–56 and 19–26 kJ/mol and 34–90 and 47–87 kJ/mol, respectively.     

A Network Architecture with High Availability for Real-time Premium Traffic over the Internet

Real-time traffic will be a predominant traffic type in the next generation networks, and networks with 100% reliability and availability will be required by real-time premium traffic. It is believed that QoS guarantees could be better provided by connection oriented networks such as Multi Protocol Label Switching (MPLS). These connection oriented networks are more vulnerable to network failure. Conventional path protection methods perform re-routing to cope with this. However, re-routing always causes packet losses and results in service outage. These losses are bursty in nature and highly degrade the QoS of the real-time premium traffic. Thus, 100% availability cannot be achieved by conventional methods. The novel path protection proposed in this paper recovers the bursty packet losses due to re-routing by using forward error correction (FEC) path. Therefore, it can provide network architecture with no service outage for such traffic. The numerical results show that the proposed method can achieve a very high availability for real-time premium traffic in future IP/MPLS networks.

Japanese/English Cross-Language Information Retrieval: Exploration of Query Translation and Transliteration

Cross-language information retrieval (CLIR), where queriesand documents are in different languages, has of late become one ofthe major topics within the information retrieval community. Thispaper proposes a Japanese/English CLIR system, where we combine aquery translation and retrieval modules. We currently target theretrieval of technical documents, and therefore the performance of oursystem is highly dependent on the quality of the translation oftechnical terms. However, the technical term translation is stillproblematic in that technical terms are often compound words, and thusnew terms are progressively created by combining existing basewords. In addition, Japanese often represents loanwords based on itsspecial phonogram. Consequently, existing dictionaries find itdifficult to achieve sufficient coverage. To counter the firstproblem, we produce a Japanese/English dictionary for base words, andtranslate compound words on a word-by-word basis. We also use aprobabilistic method to resolve translation ambiguity. For the secondproblem, we use a transliteration method, which corresponds wordsunlisted in the base word dictionary to their phonetic equivalents inthe target language. We evaluate our system using a test collectionfor CLIR, and show that both the compound word translation andtransliteration methods improve the system performance.     

Classification of particles by centrifugal separator and analysis of the fluid behavior

This study gives fundamental knowledge on the particle classification performance by centrifugal separator.It is found that the cut size of a centrifugal separator decreases as the rotational speed increases and the liquid flow rate decreases. Fitting our experimental results with the theory, they agree with each other at high flow rate. However, the difference between them generates at low flow rate. This is because dead spaces are generated in the centrifugal separator at the low flow rate. Also, the computer simulation of the fluid behavior in the centrifugal separator can find the decrease of the velocity near the wall under the low flow rate, which suggests the possibility of the formation of dead spaces in the separator.     

GPC Profile Change of Potato Starch with Extrusion Processing

Native potato starch (moisture content 15%) was treated by twin screw extruder under four operating conditions with varying barrel temperatures (110°C–230°C). These modified starch samples were compared to native and drum-dried starch. Starch sample solution for gel chromatography was prepared by the three methods (acidic, alkaline, and neutral methods). They were subjected to gel chromatography on Toyopearl HW-75, and some difference was found among the three gel chromatographic patterns obtained from the same starch solution. This discrepancy among GPC patterns suggests formation of some types of anhydro-bonds between chains of amylopectin and or amylose in the extrusion process. Elevating barrel temperature increases degree of depolymerization. The size of fragments formed with the treatment is bigger than that of oligosaccharides but smaller than that of amylose.     

Thin reduced graphene oxide interlayer with a conjugated block copolymer for high performance non-volatile ferroelectric polymer memory

Polymer ferroelectric-gate field effect transistors (Fe-FETs) employing ferroelectric polymer thin films as gate insulators are highly attractive as a next-generation non-volatile memory. For minimizing gate leakage current of a device which arises from electrically defective ferroelectric polymer layer in particular at low operation voltage, the materials design of interlayers between the ferroelectric insulator and gate electrode is essential. Here, we introduce a new solution-processed interlayer of conductive reduced graphene oxides (rGOs) modified with a conjugated block copolymer, poly(styrene-block-paraphenylene) (PS-b-PPP). A FeFET with a solution-processed p-type oligomeric semiconducting channel and ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) insulator exhibited characteristic source–drain current hysteresis arising from ferroelectric polarization switching of a PVDF-TrFE insulator. Our PS-b-PPP modified rGOs (PMrGOs) with conductive moieties embedded in insulating polymer matrix not only significantly reduced the gate leakage current but also efficiently lowered operation voltage of the device. In consequence, the device showed large memory gate voltage window and high ON/OFF source–drain current ratio with excellent data retention and read/write cycle endurance. Furthermore, our PMrGOs interlayers were successfully employed to FeFETs fabricated on mechanically flexible substrates with promising non-volatile memory performance under repetitive bending deformation.     

Evidence of Oxygen Ferromagnetism in ZnO Based Materials

Discoveries of room‐temperature ferromagnetism (RTFM) in semiconductors hold great promise in future spintronics technologies. Unfortunately, this ferromagnetism remains poorly understood and the debate concerning the nature, carrier‐mediated versus defect‐mediated, of this ferromagnetism in semiconducting oxides is still open. Here, by using X‐ray absorption (XAS) and X‐ray magnetic circular dichroism (XMCD), it is demonstrated that the oxygen ions have a ferromagnetic response in different ZnO‐based compounds showing RTFM behavior: ZnO nanoparticles capped with organic molecules and ZnO/ZnS heterostructures. These results demonstrate the intrinsic occurrence of RTFM in these systems, and point out that it is not related to the metallic cation but it relays on the conduction band of the semiconductor.