A non-specific lipid transfer protein from Arabidopsis is a cell wall protein

Lipid transfer proteins (LTPs), mediate the transfer of phospholipids between membranes in vitro. However, the in vivo function of LTPs is not known. To determine the precise location of a non-specific LTP from Arabidopsis, a cDNA clone was used to produce an Arabidopsis LTP:protein A fusion. Antibodies raised against the fusion were used to localize the Arabidopsis LTP by immunoelectron microscopy. LTP was found to be located in the cell wall, mainly in epidermal cells. This location appears to be inconsistent with the proposed role of the protein in intracellular lipid transfer.     

Threshold voltage-minimum gate length trade-off in buried channelPMOS devices for scaled supply voltage CMOS technologies

The trade-off between threshold voltage (V_th) and the minimum gate length (L_min) is discussed for optimizing the performance of buried channel PMOS transistors for low voltage/low power high-speed digital CMOS circuits. In a low supply voltage CMOS technology it is desirable to scale V_th and L_min for improved circuit performance. However, these two parameters cannot be scaled independently due to the channel punch-through effect. Statistical process/device modeling, split lot experiments, circuit simulations, and measurements are performed to optimize the PMOS transistor current drive and CMOS circuit speed. We show that trading PMOS transistor V_th for a smaller L_min results in faster circuits for low supply voltage (3.3 to 1.8 V) n⁺-polysilicon gate CMOS technology, Circuit simulation and measurements are performed in this study. Approximate empirical expressions are given for the optimum buried channel PMOS transistor V _th for minimizing CMOS circuit speed for cases involving: (1) constant capacitive load and (2) load capacitance proportional to MOS gate capacitance. The results of the numerical exercise are applied to the centering of device parameters of a 0.5 μm 3.3 V CMOS technology that (a) matches the speed of our 0.5 μm 5 V CMOS technology, and (b) achieves good performance down to 1.8 V power supply. For this process the optimum PMOS transistor V_th (absolute value) is approximately 0.85-0.90 V     

Bit error simulation for π/4 DQPSK mobile radio communicationsusing two-ray and measurement-based impulse response models

An accurate software/hardware bit-by-bit error simulator for mobile radio communications is described. Simulation results in indoor and outdoor channels are compared with theoretical results. Bit error rate (BER) results in simulated frequency-selective fading channels generated by several channel models such as two-ray, constant amplitude, and simulated indoor radio channel impulse models (SIRCIMs) are presented. It is shown that BER is not only dependent on the RMS delay spread, but also on the distribution of temporal and spatial multipath components in local areas. An important result is that a two-ray Rayleigh fading model is a poor fit for indoor wireless channels and, if used, can underestimate the BER by orders of magnitude. A real-time bit error simulation of video transmission using the bit-by-bit error simulator is described. The simulator, called BERSIM, is shown to be a useful tool for evaluating emerging data transmission products for digital mobile communications     

Determinants for Successful Agile Collaboration between UX Designers and Software Developers in a Complex Organisation

ABSTRACT

Agile and User-centered design processes have been reported to frequently putting contradictory demands on people working within these methodological frameworks. The current research addresses this point by focussing on the crucial relationship between software developer and designer. An online survey, a contextual inquiry, and a diary study were employed with 107 developers and designers in a large media organization to determine the factors for success in agile development cycles. The results from the survey show that while developers and designers have similar levels of satisfaction with agile processes, there are differences in the factors predicting those ratings. Developers are happier with the wider teamwork but want more access to and close collaboration with designers, while the latters’ concern was the quality of the wider teamwork. Additional contextual inquiries and a diary study with pairs of designers and developers reflected the survey findings that close cooperation (and proximity) was essential for improving communication, reducing inefficiencies, and avoiding suboptimal products being released. However, organizational processes, the setup of the work environment, and managerial traditions meant that this close collaboration and localized decision-making was found difficult to maintain. Results from the survey, the contextual inquiry, and the diary study found six factors for success from collaborations emerged.     

Histology image analysis for carcinoma detection and grading

This paper presents an overview of the image analysis techniques in the domain of histopathology, specifically, for the objective of automated carcinoma detection and classification. As in other biomedical imaging areas such as radiology, many computer assisted diagnosis (CAD) systems have been implemented to aid histopathologists and clinicians in cancer diagnosis and research, which have been attempted to significantly reduce the labor and subjectivity of traditional manual intervention with histology images. The task of automated histology image analysis is usually not simple due to the unique characteristics of histology imaging, including the variability in image preparation techniques, clinical interpretation protocols, and the complex structures and very large size of the images themselves. In this paper we discuss those characteristics, provide relevant background information about slide preparation and interpretation, and review the application of digital image processing techniques to the field of histology image analysis. In particular, emphasis is given to state-of-the-art image segmentation methods for feature extraction and disease classification. Four major carcinomas of cervix, prostate, breast, and lung are selected to illustrate the functions and capabilities of existing CAD systems.     

Parabolic flight experiments with PK-4

PK-4 is an experiment designed to investigate complex plasmas (low-temperature plasmas containing microparticles, e.g. dust grains) in a combined dc/rf discharge under microgravity conditions on board of the International Space Station. Within the 35th and 36th ESA parabolic flight campaigns first experiments under microgravity conditions in a specially designed experiment set-up have been performed. The particle flow inside the tube, the appearance of dust waves, and lane formation in interpenetrating particle clouds have been observed.     

Shaped charge jet interaction with Highly Effective Passive Sandwich Systems - experiments and analysis

The development and investigation of reactive sandwich targets and their interaction with shaped charge jets is one of the many research areas, where important contributions were made by Manfred Held. Such reactive sandwiches are known to be extremely effective against jets, but have a number of disadvantages. In this work, the interaction of the copper jet from a shaped charge calibre 136 mm with a double sandwich system, each sandwich consisting of a non-reacting layer between outer steel plates, is investigated. In 10 experiments with identical geometrical setup, only the material of the non-reacting layer is changed. Using flash X-ray pictures, the interaction of the jet with the sandwich system is investigated. Evaluation of these pictures as well as the comparison of the measured residual penetrations behind the sandwich target clearly demonstrate the influence of the material of the inner sandwich layer. The deformation and movement of the steel plates, caused by the penetrating jet, can be seen in the X-ray pictures. It is shown that it is possible to distort a shaped charge jet so that its penetration capability behind the target is reduced to a minimum. A fully three-dimensional hydrocode simulation of the experiments enabled the jet/sandwich interaction and steel plate deformation and rupture to be studied in detail.     

Low temperature age hardening in U-13 at.% Nb: An assessment of chemical redistribution mechanisms

Low temperature aging (<350 °C) of U-13 at.% Nb martensite results in increased strength levels accompanied by significant ductility loss. To determine the decomposition mechanism(s) responsible for these mechanical property changes, atom probe tomography was used to examine the niobium and impurity distributions after aging at 200 or 300 °C for times ranging from 2 h to 70 days. No patterns of niobium or impurity atoms were observed that would indicate segregation to the martensitic twin interfaces, making this hardening mechanism unlikely. Phase separation into roughly equiaxed regions of high and low niobium concentration was clearly observed after aging at 300 °C for 70 days. However, only subtle niobium concentration changes were observed after aging at 200 °C relative to the as-quenched condition, indicating that conventional phase separation is an unlikely explanation for the dramatic mechanical property changes at 200 °C. Therefore, consideration of aging mechanisms other than segregation and phase separation may be warranted.